Products in Fence, Decks & Rails: Polyesters

Crystic® Polyester Resin 397PA is a pre-accelerated isophthalic/neopentyl glycol polyester resin with a high heat deflection temperature and good water and chemical resistance. It is recommended for the fabrication of high-performance laminates for critical applications in aggressive environments. This product is suitable for contact molding and filament winding processes.

Crystic® Polyester Resin 406COS is a non-thixotropic, non-accelerated, orthophthalic unsaturated polyester resin used for casting, artificial marble, and solid surface applications. This product has a 5-minute gel time. It contains UV absorbers, allowing very good resistance to yellowing and UV radiation.

Crystic® Polyester Resin 921 is an un-accelerated, orthophthalic, unsaturated polyester resin with a low viscosity to accept the maximum level of filler particles. It has been developed specifically for polymer concrete. Crystic® 921PALV is a lower viscosity, thixotropic version of this product. It is suitable for pigmented castings filled to a low level or not filled at all.

Crystic® Polyester Resin U904LVK is an orthophtalic, pre accelerated, non thixotropic, unsaturated polyester resin. It has to be used when good mechanical properties and good heat resistance are required. The product has been designed to be catalysed with a conventional MEKP at 50% while giving a very fast demold time under quite low exotherm.

Interplastic Corporation PA-150-PHHN (general purpose) has a high density polyester adhesive.

DISTITRON® 411 V4 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce pipes and tanks through filament winding method.

DISTITRON® 514 Z1 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce transparent and corrugated sheets through continuous laminating method.

Norsodyne® BR-270HV - multicolor application, high viscosity, thixotropic, good workability, for rods production. Main applications areas are leisure and clothing etc.

Polydyne® 6120 is general purpose, preaccelerated, thixotropic with low reactivity. And it is generally used in composites applicatons.

DISTITRON® 183 B1 - Unsaturated polyester resin in styrene,Isophthalic. It is used to produce production of gelcoat through mix with fillers and/or additives.

DISTITRON® 389 AV2,5 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce statues through centrifugal casting method.

DISTITRON® 516 AL - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce transparent and corrugated sheets through continuous laminating method.

ENYDYNE® H 88222 TA - Unsaturated polyester resin in styrene,DCPD. It is used to produce parts with high resistance to fire through hand lay up and spray up,injection molding,rtm method.

Armorflex® 944 - standard iso NPG gel coat; excellent blister resistance; resistant to certain chemicals. Main applications areas are building and construction, composites, industrial sector, marine etc.

DISTITRON® 1404 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce abrasives,chips through casting method.

Stypol® 040-4954 is clear MACT compliant NPG isophthalic gel coats. They have been designed for use in the manufacturing of cultured marble, onyx, and granite.

Polydyne® 6082 - orthophthalic resin for roof tiles, promoted, medium viscosity and with UV absorber. Main applications areas are building and construction, composites, home and domestic applications, industrial sector etc.

Norsodyne® 3338W has general purpose, good water resistance, promoted and wax version of Norsodyne® 3338. Main applications areas are automotive, building and construction, industrial sector, marine etc.

ENYDYNE® C 66100 A - Unsaturated polyester resin in styrene,DCPD. It is used to produce furnitures and sanitary through casting,continuous laminating method.

Stypol® RHPS1221 - pre-promoted unsaturated polyester resin, high performance RTM laminating. Main applications areas are agrochemical, agrobusiness, automotive, building and construction, composites, industrial sector, marine, mass transports etc.

Detroit Body Filler 60238-50 a non-flowing, pumpable adhesive. 60238-50 should be used for bonding, fairing, filling, and radius applications. This product is designed to have good vertical hang and stack abilities but maintains high flow volumes. 60238-50 is designed to provide a product with an eight-pound weight/gallon with excellent adhesive properties. Gel times can be varied for specific customer needs.

NORSODYNE® H 32433 TA - Unsaturated polyester resin in styrene,Isophthalic. It is used to produce marine,boats through hand lay up and spray up method.

NORSODYNE® P 46074 - Homogeneous system comprising a very high reactivity resin and a shrink control agent,in styrene. It is used to produce bmc and smc manufacture,good superficial appearance through pultrusion method.

DISTITRON® 429 ESX20Q - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce marine,boats,reinforced plastics,general purpose through hand lay up and spray up method.

Norsodyne® 3338 has general purpose, good water resistance, promoted and non-waxed. Main applications areas are automotive, building and construction, industrial sector, marine etc.

NORSODYNE® H 44173 - Unsaturated polyester resin in styrene,Isophthalic. It is used to produce marine,boats,pipes and tanks through centrifugal casting,filament winding,hand lay up and spray up,injection molding,rtm,press and vacuum molding,pultrusion method.

NORSODYNE® P 44070 L - Unsaturated polyester resin in styrene,Isophthalic. It is used as general purpose in hand lay up and spray up,pultrusion method.

Norsodyne® BN-595Y - excellent pearl dispersion and surface gloss, thin button. Main applications areas are leisure and clothing etc.

NORSODYNE® C 13133 L - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce agglomerated and engineered stones through casting method.

Advance Coatings Company Hall & deck Putty is polyester putty reinforced with milled glass. Shapes and spreads nicely and vasoline like consistency.

ENYDYNE® C 66141 L - Unsaturated polyester resin in styrene,DCPD. It is used to produce polymeric concrete through casting method.

Norsodyne® 3318FR - non-promoted and non-wax. Main applications areas are automotive, building and construction, industrial sector, marine etc.

Polynt Group 752-4420 is general purpose RTM resin with rapid cure rate for increased mold turn over; good profile; UL 94 V-O and 5V listed product; class I flame-retardant without additional additives; meets mil-r-7575c requirements for grade a applications. Main applications areas are aeronautical, agrochemical, agrobusiness, automotive, building and construction, composites, industrial sector, marine, mass transports, railway sector etc.

Norsodyne® 2625TI - promoted and non-waxed, high cross-linked resin, high hdt, excellent chemical resistance. Main applications areas are automotive, building and construction, industrial sector, marine etc.

Polynt Group 737-6755 is general purpose RTM resin with rapid cure rate for increased mold turnover; good profile. Main applications areas are aeolian, agrochemical, agrobusiness, automotive, building and construction, composites, industrial sector, marine, mass transports etc.

DISTITRON® 100 SV9 - Unsaturated polyester resin in styrene,DCPD. It is used to produce mastics through mix with fillers and/or additives.