Products in Other Building Materials: Heat Resistance

Espolex® 3785A is a TPV known for its excellent colorability and appearance. It demonstrates strong adhesion to polypropylene compounds and polyethylene, processing like a thermoplastic while acting like a rubber.   Applications: Automotive interior (gaskets, grips, etc.) Automotive exterior Gaskets Mats Overmolding Bathroom accessories Boats Floor mats Jet-propelled vehicles Mud flaps Weatherstripping Injection molded parts   Features: High flowability Rubber-like elasticity and feel   Benefits: Recyclable

Espolex® 3675A is a TPV known for its excellent colorability and appearance. It exhibits strong adhesion to polypropylene compounds and polyethylene, while possessing thermoplastic processing characteristics and rubber-like properties.   Applications: Automotive interior (gaskets, grips, etc.) Automotive exterior trim Seat belt sleeves Gaskets Floor mats Overmolding Bathroom accessories Boats Jet-propelled vehicles Mud flaps Weatherstripping Injection molded parts   Features: High flowability Rubber-like elasticity and feel   Benefits: Recyclable

Improved heat, chemical and dynamical resistance. Major Benefits: Low emission; Medium heat resistance; Chemical resistance. Typical Applications: Mirror housing, Door components, Instrument panel parts, Pipes & fittings.

PLASMER® 1065BM/NM is a general purpose grade capable of various types of extrusion and injection molding. It is mainly used in automobiles, industrial and household electrical/electronic parts, and in the construction industry. PLASMER ® 1065BM/NM is a fully crosslinked product and can be reused without scrap during processing.

PLASMER® 1050DB/DN is a general purpose grade capable of various types of extrusion and injection molding. It is mainly used in automobiles, industrial and household electrical/electronic parts, and in the construction industry. PLASMER ® 1050DB/DN is a fully crosslinked product and can be reused without scrap during processing.

Shandong JinChangshu New Mstar Technology JCS-305 is a green, non-toxic and environmentally friendly with excellent high heat resistance, strong ability to inhibit coloring and good weather resistance. It also greatly improve the welding performance and impact resistance of the product. It has good physical processing performance, excellent precipitation resistance, and "zinc burn" resistance. The Products have passed SGS inspection.

PLASMER® 2055B/N is a general purpose grade capable of various types of extrusion and injection molding. It is mainly used in automobiles, industrial and household electrical/electronic parts, and in the construction industry. PLASMER ® 2055B/N can be reused without scrap during processing.

ESTOPLAST EP 1500GY117 is a Polybutylene terephthalate - unfilled which is a medium viscosity, head lamp bezel and it is used in E-motor components, lightings and lamp fittings, base and cover.

Gemapilen® GF10 is 10% glass fiber Reinforced PPH and are manufactured with Homo-Polymer or Co-Polymer to fit requirement. They increases the mechanical properties of products much further than what can be obtained through the use of mineral based compounds and enhancers or natural blends. It is an alternative to straight polymer use or mineral compounds are wide ranging and benefit a number of plastic manufacturing sectors.

PLASTOMER® 1080B/N is a general purpose grade capable of various types of extrusion and injection molding. It is mainly used in automobiles, industrial and household electrical/electronic parts, and in the construction industry. PLASMER ® 1080B/N is a fully crosslinked product and can be reused without scrap during processing.

Shandong JinChangshu New Mstar Technology JCS-308 is a green, non-toxic and environmentally friendly with excellent high heat resistance, strong ability to inhibit coloring and good weather resistance. It also greatly improve the welding performance and impact resistance of the product. It has good physical processing performance, excellent precipitation resistance, and "zinc burn" resistance. The Products have passed SGS inspection.

Colmant Coated Fabrics Silicone Sheet are ideal for high and low temperature applications. Electrical properties are excellent and resistance to weathering and ozone attack is outstanding. It is not resistant to super-heated steam. Physical properties are generally low but are at least retained at higher temperatures. Gas permeability is very poor as is resistance to petroleum based fluids. Silicone rubbers are expensive in comparison to most other rubbers. Food Quality/FDA compliant grades are available for use in the food and pharmaceutical industries.

PLASMER® 1040DB/DN is a general purpose grade capable of various types of extrusion and injection molding. It is mainly used in automobiles, industrial and household electrical/electronic parts, and in the construction industry. PLASMER ® 1040DB/DN is a fully crosslinked product and can be reused without scrap during processing.

ESTOPLAST EP 1500WW06 is a Polybutylene terephthalate - unfilled which is a medium viscosity, head lamp bezel and it is used in E-motor components, lightings and lamp fittings, base and cover.

PLASMER® 1035BM/NM is a general purpose grade capable of various types of extrusion and injection molding. It is mainly used in automobiles, industrial and household electrical/electronic parts, and in the construction industry. PLASMER ® 1035BM/NM is a fully crosslinked product and can be reused without scrap during processing.

PLASTOMER® 1075B/N is a general purpose grade capable of various types of extrusion and injection molding. It is mainly used in automobiles, industrial and household electrical/electronic parts, and in the construction industry. PLASMER® 1075B/N is a fully crosslinked product and can be reused without scrap during processing.

Gemapilen® GF10 CP is 10% glass fiber reinforced PP Co-polymer and are manufactured with Homo-Polymer or Co-Polymer to fit requirement. They increases the mechanical properties of products much further than what can be obtained through the use of mineral based compounds and enhancers or natural blends. It is an alternative to straight polymer use or mineral compounds are wide ranging and benefit a number of plastic manufacturing sectors.

ESTOPLAST EP 1500BB11DP is a Polybutylene terephthalate unfilled congruous for extrusion applications like OFC, rods, tubes, fibers.

PA66 GF 60% reinforced

PA66 GF 30% reinforced

Gemapilen® GF20 is 20% glass fiber Reinforced PPH and are manufactured with Homo-Polymer or Co-Polymer to fit requirement. They increases the mechanical properties of products much further than what can be obtained through the use of mineral based compounds and enhancers or natural blends. It is an alternative to straight polymer use or mineral compounds are wide ranging and benefit a number of plastic manufacturing sectors.

European Plastic Joint Stock Company PP Filler Masterbatch is compounded of Calcium Carbonate CaCO3, Polypropylene PP as the carrier and other special additives by twin-screw machines.

PLASMER® 1045BM/NM is a general purpose grade capable of various types of extrusion and injection molding. It is mainly used in automobiles, industrial and household electrical/electronic parts, and in the construction industry. PLASMER ® 1045BM/NM is a fully crosslinked product and can be reused without scrap during processing.

ESTOPLAST EP 1500GY165 is a Polybutylene terephthalate - unfilled which is a medium viscosity, head lamp bezel and it is used in E-motor components, lightings and lamp fittings, base and cover.

PLASMER® 1055BM/NM is a general purpose grade capable of various types of extrusion and injection molding. It is mainly used in automobiles, industrial and household electrical/electronic parts, and in the construction industry. PLASMER ® 1055BM/NM is a fully crosslinked product and can be reused without scrap during processing.

Gemapilen® GF20 CP is 20% glass fiber reinforced PP Co-polymer and are manufactured with Homo-Polymer or Co-Polymer to fit requirement. They increases the mechanical properties of products much further than what can be obtained through the use of mineral based compounds and enhancers or natural blends. It is an alternative to straight polymer use or mineral compounds are wide ranging and benefit a number of plastic manufacturing sectors.

Polsil® GUM 214/70 is a special grade heat cured elastomer designed for flame-retardant applications.

PLASMER® 2065B/N is a general purpose grade capable of various types of extrusion and injection molding. It is mainly used in automobiles, industrial and household electrical/electronic parts, and in the construction industry. PLASTOMER ® 2065B/N can be reused without scrap during processing.

PA66 GF 35% reinforced

PLASMER® 1025BM/NM is a general purpose grade capable of various types of extrusion and injection molding. It is mainly used in automobiles, industrial and household electrical/electronic parts, and in the construction industry. PLASMER ® 1025BM/NM is a fully crosslinked product and can be reused without scrap during processing.

PA66 GF 15% reinforced

ESTOPLAST EP 2015BB01 is a Polybutylene Terephthalate - Glass fiber reinforcement, which is 15% used in interior parts of automotive as well as in bobbins, E-motor components, lightings and lamp fittings.

ESTOPLAST EP 1500GY166 is a Polybutylene terephthalate - unfilled which is a medium viscosity, head lamp bezel and it is used in E-motor components, lightings and lamp fittings, base and cover.

Shandong JinChangshu New Mstar Technology JCS-309 is a green, non-toxic and environmentally friendly with excellent high heat resistance, strong ability to inhibit coloring and good weather resistance. It also greatly improve the welding performance and impact resistance of the product. It has good physical processing performance, excellent precipitation resistance, and "zinc burn" resistance. The Products have passed SGS inspection.

PA66 GF 50% reinforced

Topilene® HB240TC is a specially designed polypropylene block copolymer (natural colored) that features excellent stiffness & impact strength balance and enhanced thermal stability. It is suitable material for pliable corrugated conduit pipes, thermoforming sheet and injection blow molding applications. Topilene® HB240TC complies with FDA requirements in the code of Federal Regulations in 21 CFR 177.1520 for food contact.