Products in Pipes & Plumbing: Polyethylenes

284 Products found in Pipes & Plumbing

UTEC® 5541 banner

Braskem AmericaUTEC® 5541

Processing Methods:Ram Extrusion, Compression Molding
Polymer Name:Ultra High Molecular Weight Polyethylene (UHMWPE)

Braskem America UTEC® 5541 is an Ultra High Molecular Weight Polyethylene (UHMWPE) with a molecular weight about 10 times higher than High Density Polyethylene (HDPE) resins. This extremely high molecular weight yields several unique properties to this polymer such as high abrasion resistance, impact strength, and low coefficient of friction that makes it a self-lubricating material.

For more information regarding REACH, please visit Braskem's site

UTEC® 5540 banner

Braskem AmericaUTEC® 5540

Processing Methods:Extrusion, Compression Molding, Ram Extrusion
Polymer Name:Ultra High Molecular Weight Polyethylene (UHMWPE)

Braskem America UTEC® 5540 is an Ultra High Molecular Weight Polyethylene (UHMWPE) with a molecular weight about 10 times higher than High Density Polyethylene (HDPE) resins. This extremely high molecular weight yields several unique properties to this polymer such as high abrasion resistance, impact strength, and low coefficient of friction that makes it a self-lubricating material.

For more information regarding REACH, please visit Braskem's site

UTEC® 3040 banner

Braskem AmericaUTEC® 3040

Processing Methods:Ram Extrusion, Compression Molding
Polymer Name:Ultra High Molecular Weight Polyethylene (UHMWPE)

Braskem America UTEC® 3040 is an ultra high molecular weight polyethylene (UHMWPE) with a molecular weight about 10 times higher than High Density Polyethylene (HDPE) resins. This extremely high molecular weight yields several unique properties to this polymer such as high abrasion resistance, impact strength and low coefficient of friction that makes it a self-lubricating material.

For more information regarding REACH, please visit Braskem's site

UTEC® 4040 banner

Braskem AmericaUTEC® 4040

Processing Methods:Ram Extrusion, Compression Molding
Polymer Name:Ultra High Molecular Weight Polyethylene (UHMWPE)

Braskem America UTEC®4040 is an Ultra High Molecular Weight Polyethylene (UHMWPE) with a molecular weight about 10 times higher than High Density Polyethylene (HDPE) resins. This extremely high molecular weight yields several unique properties to this polymer such as high abrasion resistance, impact strength, and low coefficient of friction that makes it a self-lubricating material.

For more information regarding REACH, please visit Braskem's site

UTEC® 4041 banner

Braskem AmericaUTEC® 4041

Processing Methods:Ram Extrusion, Compression Molding
Polymer Name:Ultra High Molecular Weight Polyethylene (UHMWPE)

Braskem America UTEC® 4041 is an ultra high molecular weight polyethylene (UHMWPE) with a molecular weight about 10 times higher than high density polyethylene (HDPE) resins. This extremely high molecular weight yields several unique properties to this polymer such as high abrasion resistance, impact strength, and low coefficient of friction that makes it a self-lubricating material.

Braskem America HDP0353 banner

Braskem AmericaBraskem America HDP0353

Polymer Name:High Density Polyethylene (HDPE)
Processing Methods:Pipe Extrusion
Melt Flow Index:0.35 - 0.35 g/10 min

Braskem HDP0353 is a high density polyethylene copolymer (HDPE) developed for corrugated piping. Applications and suggested users include Industrial Standard Compliance ASTM D 3350 and Cell Classification PE 435620A.

RPR 5A1 WE Recycled Polyethylene banner

Braskem AmericaRPR 5A1 WE Recycled Polyethylene

Polymer Name:High Density Polyethylene (HDPE)
Labeling Claims:Recycled, Low Carbon Footprint (PCF), Contains PCR Resin, Sustainable
Processing Methods:Extrusion, Blow Molding
Density:955.0 - 955.0 kg/m³

Braskem Recycled PRP 5A1 WE recycled polyethylene is a high-density polyethylene (HDPE) embodying eco-conscious attributes. With labeling claims of being bio-based, containing PCR resin, and having a low carbon footprint (PCF), this polymer emphasizes sustainability. Its notable feature includes excellent environmental stress crack resistance (ESCR). Tailored for containers, small bottles, and blow molding of up to 20 L for chemicals, domestic use, and oils Available in a natural color.

Braskem AmericaSLL118

Polymer Name:Linear Low Density Polyethylene (LLDPE)
Processing Methods:Blown Film Extrusion, Cast Film Extrusion, Extrusion, Film Extrusion
Melt Flow Index:1.0 - 1.0 g/10 min

SLL118 is a Linear Low Density Polyethylene, copolymer of butene-1. This product is specifically designed for blown film extrusion in blends with other polyethylenes. The resulting films exhibit excellent processing performance, balanced optical and mechanical properties, and superior sealability. SLL118 boasts a very low gel amount and includes oxidant additives. Notably, this grade contains a minimum biobased carbon content of 87%, as determined according to ASTM D6866.

For more information regarding REACH, please visit Braskem's site

Braskem AmericaSLH118

Polymer Name:Linear Low Density Polyethylene (LLDPE)
Processing Methods:Blown Film Extrusion, Cast Film Extrusion, Extrusion, Film Extrusion
Additives Included:Antioxidant
Melt Flow Index:1.0 - 1.0 g/10 min

SLH118 is a Linear Low Density Polyethylene developed specifically for blown film extrusion. Films made with this product exhibit a balanced combination of good processing performance, optical and mechanical properties, and sealability. The resin contains very low gel amount and includes oxidant additives. The minimum biobased carbon content of this grade is 84%, determined according to ASTM D6866.

For more information regarding REACH, please visit Braskem's site

UTEC® 3041 banner

Braskem AmericaUTEC® 3041

Processing Methods:Ram Extrusion, Compression Molding
Polymer Name:Ultra High Molecular Weight Polyethylene (UHMWPE)

Braskem America UTEC® 3041 is an ultra high molecular weight polyethylene (UHMWPE) with a molecular weight about 10 times higher than High Density Polyethylene (HDPE) resins. This extremely high molecular weight yields several unique properties to this polymer such as high abrasion resistance, impact strength, and low coefficient of friction that makes it a self-lubricating material.

For more information regarding REACH, please visit Braskem's site

Braskem AmericaSLH218

Polymer Name:Linear Low Density Polyethylene (LLDPE)
Processing Methods:Blown Film Extrusion, Cast Film Extrusion, Extrusion, Film Extrusion, Coextrusion
Melt Flow Index:2.3 - 2.3 g/10 min

SLH218 is a LLDPE Hexene copolymer, expertly crafted by Braskem. This grade delivers an optimal balance of optical properties, mechanical properties (especially stretchability), sealability, and processability. It contains very low gel content, ensuring smooth processing. With a minimum biobased carbon content of 84%, determined according to ASTM D6866, SLH218 upholds sustainable practices while offering versatile performance in various applications.

For more information regarding REACH, please visit Braskem's site

Arqlite Composite Plastic Pellet banner

ArqliteArqlite Composite Plastic Pellet

Polymer Name:Polypropylene (unspecified), Low Density Polyethylene (LDPE), Polyethylene Terephthalate (PET)
Chemical Family:Polypropylenes (PP), Polyesters, Polyolefins, Polyethylene Terephthalate (PET), Polyethylenes
Processing Methods:Injection Molding, Extrusion
Plastics & Elastomers End Uses:Plastic Hardware, Automotive Components, Pipes, Building Materials
Density:832.3 - 832.3 kg/m³

Arqlite Composite Plastic Pellet is a 100% recycled thermoplastic blend for injection molding and extrusion, contributing to reducing the carbon footprint, increasing recycled content, and reducing the costs of plastic products. This homogenized compound can be used at a 100% concentration or mixed with pure resins (PP, PE, or PET)

PEXIDAN® L/T ECLIPSE banner

SACO AEI PolymersPEXIDAN® L/T ECLIPSE

Polymer Name:High Density Polyethylene (HDPE) Compound, High Density Polyethylene (HDPE)
Melt Flow Index:0.7 - 0.7 g/10 min

PEXIDAN® L/T ECLIPSE is a high density PEX system consisting of a silane grafted basecompound A-1001 and a catalyst masterbatch CAT-003 (or A-1022 and CAT-117). When mixed and extruded in the proper proportions, the two-component system results in a material that is crosslinkable by exposure to moisture or by immersion in hot water at 90-95°C. PEXIDAN® L/T is listed by NSF International to standards 14 and 61 and to Canadian Standards Association standard B137.5. NSFI certification to ASTM F876 and ASTM F2023 testifies to its superior resistance to oxidation by hot, chlorinated water. PEXIDAN® L/T is permitted to be used in domestic continuous re-circulation systems and is listed by NSF as a NSF-pw CL5 / PEX 5006 material.

Tradepro HDPE 10793 banner

TradeproTradepro HDPE 10793

Polymer Name:High Density Polyethylene (HDPE)
Labeling Claims:Recycled, Contains PCR Resin
Processing Methods:Sheet Extrusion, Compounding, Pipe Extrusion, Extrusion, Blow Molding
Density:950.3 - 950.3 kg/m³

HDPE 10793 is produced using 100% post-consumer mixed color containers collected from curbside collections.

PEXIDAN® SX739 banner

SACO AEI PolymersPEXIDAN® SX739

Polymer Name:High Density Polyethylene (HDPE) Compound, High Density Polyethylene (HDPE)
Processing Methods:Injection Molding

Material SX739 is a silane grafted HDPE compound curable by exposure to moist conditions. SX739 is specifically designed for high output processing by conventional thermoplastic injection molding. The graft component SX739 is mixed with a crosslinking catalyst masterbatch CM488/6 generally in the ratio 95:5. This material combines good flow, high rigidity and excellent notched impact strength. The two component system SX739:CM488/6 has high degree of crosslinking which gives it a useful strength at temperatures not usually reached by HDPE.

SIBUR Polyethylene HD 03490 NP test batch TU 20.16.10-014-81060768-2018 banner

SIBURSIBUR Polyethylene HD 03490 NP test batch TU 20.16.10-014-81060768-2018

Polymer Name:High Density Polyethylene (HDPE)
Processing Methods:Extrusion
Melt Flow Index:0.3 - 0.3 g/10 min

HD 03490 PE is high-density PE 100-like bimodal copolymer of ethylene with hexene-1. The product is characterized by a balanced combination of physical and mechanical properties and good processability.

Tasnee HDPE 100 Blue banner

TasneeTasnee HDPE 100 Blue

Polymer Name:High Density Polyethylene (HDPE)
Processing Methods:Extrusion, Injection Molding
Melt Flow Index:6.4 - 6.4 g/10 min

Tasnee HD 100 Blue is a High Density Polyethylene, blue colored resin. The product is classified as PE 100. Tasnee HD 100 Blue provides excellent environmental stress cracking resistance properties (ESCR) with very good long term hydrostatic strength and combines very high impact and stiffness properties.

PEXIDAN® L/T banner

SACO AEI PolymersPEXIDAN® L/T

Polymer Name:High Density Polyethylene (HDPE) Compound, High Density Polyethylene (HDPE)
Melt Flow Index:0.7 - 0.7 g/10 min

PEXIDAN® L/T is a high density PEX system consisting of a silane grafted basecompound A-1001 and a catalyst masterbatch CAT-003 (or A-1022 and CAT-117). When mixed and extruded in the proper proportions, the two-component system results in a material that is crosslinkable by exposure to moisture or by immersion in hot water at 90-95°C. PEXIDAN® L/T is listed by NSF International to standards 14 and 61 and to Canadian Standards Association standard B137.5. NSFI certification to ASTM F876 and ASTM F2023 testifies to its superior resistance to oxidation by hot, chlorinated water. PEXIDAN® L/T is permitted to be used in domestic continuous re-circulation systems and is listed by NSF as a NSF-pw CL5 / PEX 5006 material.

EXTINITY® 0101-107 banner

SACO AEI PolymersEXTINITY® 0101-107

Polymer Name:High Density Polyethylene (HDPE)
Processing Methods:Injection Molding, Compression Molding, Film Extrusion, Extrusion
Additives Included:Flame Retardant
Melt Flow Index:0.6 - 0.6 g/10 min

EXTINITY® 0101-107 is a halogenated, flame retardant compound specifically designed for use in plenum tube applications. This compound has good thermal and ultraviolet stability and can be converted easily on standard processing equipment.

Tasnee HDPE NPP Black banner

TasneeTasnee HDPE NPP Black

Polymer Name:High Density Polyethylene (HDPE)
Processing Methods:Extrusion
Melt Flow Index:0.6 - 0.6 g/10 min

Tasnee NPP Black is a High Density Polyethylene, black colored resin. It has high melt viscosity, it is an appropriate resin for extrusion of non pressure pipes.

Rainmaker Polymers RRHDMF__NA_ banner

Rainmaker PolymersRainmaker Polymers RRHDMF__NA_

Polymer Name:High Density Polyethylene (HDPE)

Rainmaker Polymers RRHDMF__NA_ is a high densiy polyethylene.

PEXIDAN® SX720 banner

SACO AEI PolymersPEXIDAN® SX720

Polymer Name:Crosslinked Polyethylene (XLPE / PEX)
Processing Methods:Extrusion
End Uses:Pipes
Density:952.0 - 952.0 kg/m³

PEXIDAN® SX720 is a silane grafted polyethylene compound, curable by exposure to moist conditions, and possessing good extrusion properties at high output rates. The graft component SX720 is mixed with a crosslinking catalyst masterbatch CM488 generally in the ratio 95:5. The highly crosslinked materials produced by this two-component system possess excellent impact strength, ESCR, creep and internal pressure resistance under ambient and elevated temperature conditions. These materials have been formulated for hot and cold water pressure pipes and are easily extrudable on conventional polyethylene extrusion lines.

Tradepro HDPE Black banner

TradeproTradepro HDPE Black

Polymer Name:High Density Polyethylene (HDPE)
Labeling Claims:Contains PCR Resin, Recycled
Processing Methods:Extrusion Blow Molding (EBM)
Density:920.0 - 960.0 kg/m³

Tradepro HDPE 10760 banner

TradeproTradepro HDPE 10760

Polymer Name:High Density Polyethylene (HDPE)
Labeling Claims:Recycled, Contains PCR Resin
Processing Methods:Sheet Extrusion, Compounding, Pipe Extrusion, Extrusion, Blow Molding
Density:950.3 - 950.3 kg/m³

HDPE 10760 is produced using 100% post-consumer mixed color containers collected from curbside collections.

Tasnee HDPE 100 Black banner

TasneeTasnee HDPE 100 Black

Polymer Name:High Density Polyethylene (HDPE)
Processing Methods:Extrusion
Melt Flow Index:6.4 - 6.4 g/10 min

Tasnee HD 100 Black is a High Density Polyethylene, black colored resin. The product is classified as PE 100. Tasnee HD 100 Black provides excellent environmental stress cracking resistance properties (ESCR) with very good long term hydrostatic strength and combines very high impact and stiffness properties.

PEXIDAN® L/T-UV banner

SACO AEI PolymersPEXIDAN® L/T-UV

Polymer Name:High Density Polyethylene (HDPE)
Processing Methods:Extrusion
Melt Flow Index:0.7 - 0.7 g/10 min

PEXIDAN® L/T-UV is a high density PEX system consisting of a silane grafted basecompound A-1001 and a catalyst masterbatch CAT-003 (or A-1022 and CAT-117). When mixed and extruded in the proper proportions, the two-component system results in a material that is crosslinkable by exposure to moisture or by immersion in hot water at 90-95°C. PEXIDAN® L/T is listed by NSF International to standards 14 and 61 and to Canadian Standards Association standard B137.5. NSFI certification to ASTM F876 and ASTM F2023 testifies to its superior resistance to oxidation by hot, chlorinated water. PEXIDAN® L/T is permitted to be used in domestic continuous re-circulation systems and is listed by NSF as a NSF-pw CL5 / PEX 5006 material.

EXTINITY® 0101-108 banner

SACO AEI PolymersEXTINITY® 0101-108

Polymer Name:High Density Polyethylene (HDPE)
Processing Methods:Injection Molding, Compression Molding, Film Extrusion, Extrusion
Additives Included:Flame Retardant
Melt Flow Index:0.6 - 0.6 g/10 min

EXTINITY® 0101-108 is a halogenated, flame retardant compound specifically designed for use in plenum tube applications. This compound has good thermal stability and can be converted easily on standard processing equipment.

Asrene® SP4808 banner

Chandra Asri PetrochemicalAsrene® SP4808

Polymer Name:High Density Polyethylene (HDPE)
Processing Methods:Extrusion
Melt Flow Index:0.06 - 0.06 g/10 min

Asrene® SP 4808 is a High Density Polyethylene product. It can be processed by extrusion and is available in Asia Pacific, Europe, or North America. Typical application: Plumbing/Piping/Potable Water.Characteristics include: High ESCR (Stress Crack Resistant) High Strength

Metiplen 001 LDPE Colored banner

MTM PlastikMetiplen 001 LDPE Colored

Polymer Name:Low Density Polyethylene (LDPE)
Processing Methods:Film Extrusion, Extrusion

Metiplen 001 LDPE Colored has applications such as film extrusion (production of film for general purpose and display packaging), film extrusion (heavy-duty bag, film for construction and industrial applications), wire and cable coating (Teflon, power, high signal and frequency cables), blow-up coating (detergent bottle, container for large volume and corrosive chemicals) and pipe extrusion (various pipes).

Alfaten® MDPE 130 banner

Green World CompoundingAlfaten® MDPE 130

Polymer Name:Medium Density Polyethylene (MDPE)
Labeling Claims:Contains PCR Resin, Recycled, Sustainable
Processing Methods:Injection Molding, Blown Film Extrusion, Extrusion

Alfaten® MDPE 130 is a low Density Polyethylene regenerated.

Ultzex™ 2020SB banner

Prime PolymersUltzex™ 2020SB

Polymer Name:Linear Low Density Polyethylene (LLDPE)
Processing Methods:Blow Molding
Melt Flow Index:1.6 - 1.6 g/10 min

Prime Polymers Ultzex™ 2020SB is a Linear Low Density Polyethylene product. It can be processed by blow molding and is available in Asia Pacific, Europe, or North America. Applications of Ultzex™ 2020SB include containers, packaging and plumbing/piping/potable water.Characteristics include: Clarity Good Processability Impact Resistant

K. KANELLAKIS R-HDPE 0809 banner

K. KanellakisK. KANELLAKIS R-HDPE 0809

Polymer Name:High Density Polyethylene (HDPE)
Processing Methods:Extrusion
Melt Flow Index:0.8 - 0.8 g/10 min

K. KANELLAKIS R-HDPE 0809 is available in pellet form and is used for extrusion applications.

Isoplas P651 banner

MicropolIsoplas P651

Polymer Name:Crosslinked Polyethylene (XLPE / PEX)
Processing Methods:Extrusion
End Uses:Pipes
Density:960.0 - 960.0 kg/m³

Isoplas P651 is used for rigid pipes for water transport, and for general purpose use.

KOREMPLAST MDPE KRM 40 banner

KOREMPLASTKOREMPLAST MDPE KRM 40

Polymer Name:Medium Density Polyethylene (MDPE)
Processing Methods:Extrusion
Additives Included:Processing Stabilizer, Carbon Black, Antioxidant

KOREMPLAST MDPE KRM 40 is a medium density polyethylene compound (BLACK) produced by the ultimate KOREMPLAST’s technology. Antioxidants and processing stabilizers are added, for good oxidation resistance and high mechanical properties. Carbon black gives outstanding UV resistance.

Alkadyne® MDF169 banner

QenosAlkadyne® MDF169

Polymer Name:Medium Density Polyethylene (MDPE)
Processing Methods:Extrusion
Additives Included:Antioxidant

Alkadyne MDF169 is a non-pigmented, high molecular weight MDPE co-polymer, developed as a general purpose resin for use in non-standard pipe applications. Alkadyne MDF169 contains antioxidants to protect it during extrusion and end use.

Metiplen 001 LDPE Honey Color banner

MTM PlastikMetiplen 001 LDPE Honey Color

Polymer Name:Low Density Polyethylene (LDPE)
Processing Methods:Film Extrusion, Extrusion

Metiplen 001 LDPE Honey Color has applications such as film extrusion (production of film for general purpose and display packaging), film extrusion (heavy-duty bag, film for construction and industrial applications), wire and cable coating (Teflon, power, high signal and frequency cables), blow-up coating (detergent bottle, container for large volume and corrosive chemicals) and pipe extrusion (various pipes).

Show

of 284 results