Products in Pipes & Plumbing: Unsaturated Polyester (UPE)

Crystic® Orthophthalic Spray Topcoat 408PA White is a pre-accelerated flowcoat with excellent scuff resistance, designed for use in general purpose GRP moldings. It is based on a high quality orthophthalic unsaturated polyester resin and is suitable for all general molding requirements. The product is pigmented using a highly UV resistant grade of titanium dioxide.

Crystic® Resin S15.6 is a very flexible unsaturated polyester resin based on adipic acid. It can be used alone or in conjunction with other polyester resins for the manufacturing of flexible products. Impregnating resins particularly isophtalic resins can be flexibilised by addition of Crystic® Resin S15.6 without any significant impact on the chemical resistance properties.

Crystic® Polyester Resin 272 is an isophthalic polyester resin. It is recommended for use in high-performance applications using filament winding, pultrusion, and centrifugal or contact molding processes. The fully cured laminates have high mechanical strength and excellent strength retention in wet environments at temperatures up to 60ºC.

Crystic® Polyester Resin 491 is a thixotropic, isophthalic polyester resin with good water and chemical resistance properties. It was developed for use in a wide range of critical applications that require toughness combined with water and chemical resistance. It is a versatile resin suitable for the fabrication of high-performance boat hulls intended for use in warm or tropical areas.

Crystic® Polyester Resin 406COS is a non-thixotropic, non-accelerated, orthophthalic unsaturated polyester resin used for casting, artificial marble, and solid surface applications. This product has a 5-minute gel time. It contains UV absorbers, allowing very good resistance to yellowing and UV radiation.

Crystic® Polyester Resin 921 is an un-accelerated, orthophthalic, unsaturated polyester resin with a low viscosity to accept the maximum level of filler particles. It has been developed specifically for polymer concrete. Crystic® 921PALV is a lower viscosity, thixotropic version of this product. It is suitable for pigmented castings filled to a low level or not filled at all.

Crystic® Polyester Resin U904LVK is an orthophtalic, pre accelerated, non thixotropic, unsaturated polyester resin. It has to be used when good mechanical properties and good heat resistance are required. The product has been designed to be catalysed with a conventional MEKP at 50% while giving a very fast demold time under quite low exotherm.

Cuyahoga Plastics EB5000-1 is A U.L recognized, flame retardant, mineral-filled, glass fiber reinforced polyester thermoset molding compound suitable for compression, transfer, and injection molding. It is currently supplied in bulk form, cut preforms, and box length extrusions.

ISO112 is an isophthalic unsaturated polyester resin type 1140 according to DIN 16946-2. ISO112 is particular indicated in outdoor application.

Cuyahoga Plastics EB7000-1 is A U.L recognized, flame retardant, mineral-filled, glass fiber reinforced polyester thermoset molding compound suitable for compression, transfer, and injection molding. It is currently supplied in bulk form.

Eagle Chemicals USP-EAGLE (PIP40-62) has ortho-based, very good mechanical properties, low viscosity, medium reactivity and good rigidity. Filament winding and hand lay up in pipe manufacturing

USP-EAGLE (PIP50-60) is an Isophthalic based Unsaturated Polyester resin with high mechanical & chemical resistance.

Cuyahoga Plastics AB5000 is a UV resistant, flame retardant, glass-reinforced polyester thermoset suitable for outdoor applications. Compression, transfer, and injection molding grades are available. It is currently supplied in bulk form, cut preforms, and box length extrusions.

Cuyahoga Plastics AB4000 is a mineral-filled, glass fiber reinforced polyester thermoset suitable for compression, transfer, and injection molding. It is currently supplied in bulk form, cut preforms & box length extrusions.

T19X9 is an orthophthalic unsaturated polyester resin tixotropic, preaccellerated , and catalysis indicator. T19X9 is mostly used in hand lay-up application.

Cuyahoga Plastics EB3000-2 is A U.L recognized, flame retardant, mineral-filled, glass fiber reinforced polyester thermoset molding compound suitable for compression, transfer, and injection molding. It is currently supplied in bulk form, cut preforms and box length extrusions.

USP-EAGLE (PIP40-42) is Unsaturated Polyester resin ortho based, very good mechanical properties, low viscosity, medium reactivity, and good rigidityit is used in filament winding, hand lay-up in pipe manufacturing.

DISTITRON® 411 V4 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce pipes and tanks through filament winding method.

DISTITRON® 514 Z1 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce transparent and corrugated sheets through continuous laminating method.

Norsodyne® BR-270HV - multicolor application, high viscosity, thixotropic, good workability, for rods production. Main applications areas are leisure and clothing etc.

Ilkalem AS IR-100T is ISO thixotropic unsaturated polyester resin for GRP applications.

Aekyung Chemical CW-220 is an iso type UPR.

BRE 820 is used as Centrifugal method for a high flexibility.

Polydyne® 6120 is general purpose, preaccelerated, thixotropic with low reactivity. And it is generally used in composites applicatons.

DISTITRON® 183 B1 - Unsaturated polyester resin in styrene,Isophthalic. It is used to produce production of gelcoat through mix with fillers and/or additives.

DISTITRON® 389 AV2,5 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce statues through centrifugal casting method.

DISTITRON® 516 AL - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce transparent and corrugated sheets through continuous laminating method.

ENYDYNE® H 88222 TA - Unsaturated polyester resin in styrene,DCPD. It is used to produce parts with high resistance to fire through hand lay up and spray up,injection molding,rtm method.

Armorflex® 944 - standard iso NPG gel coat; excellent blister resistance; resistant to certain chemicals. Main applications areas are building and construction, composites, industrial sector, marine etc.

DISTITRON® 1404 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce abrasives,chips through casting method.

Polydyne® 6082 - orthophthalic resin for roof tiles, promoted, medium viscosity and with UV absorber. Main applications areas are building and construction, composites, home and domestic applications, industrial sector etc.

Norsodyne® 3338W has general purpose, good water resistance, promoted and wax version of Norsodyne® 3338. Main applications areas are automotive, building and construction, industrial sector, marine etc.

ENYDYNE® C 66100 A - Unsaturated polyester resin in styrene,DCPD. It is used to produce furnitures and sanitary through casting,continuous laminating method.

Stypol® RHPS1221 - pre-promoted unsaturated polyester resin, high performance RTM laminating. Main applications areas are agrochemical, agrobusiness, automotive, building and construction, composites, industrial sector, marine, mass transports etc.

NORSODYNE® H 32433 TA - Unsaturated polyester resin in styrene,Isophthalic. It is used to produce marine,boats through hand lay up and spray up method.

NORSODYNE® P 46074 - Homogeneous system comprising a very high reactivity resin and a shrink control agent,in styrene. It is used to produce bmc and smc manufacture,good superficial appearance through pultrusion method.