Products in Pipes & Plumbing: Reinforcement

Mica Is A Generic Term Applicable To The Group Of Complex Aluminosilicate Minerals That Occur Naturally In Plate Or Sheet-Like Form.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Mica Is A Generic Term Applicable To The Group Of Complex Aluminosilicate Minerals That Occur Naturally In Plate Or Sheet-Like Form.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

CompositeWrap™ BDC20 Carbon Fabric is a medium weight, high tensile strength bidirectional carbon fabric. This material is engineered to provide extremely strong, durable and lightweight composites for structural reinforcement. CompositeWrap™ BDC20 Carbon Fabric is easy to apply, corrosion resistant and can be applied at any thickness required to provide adequate structural reinforcement. It easily wets out and can be installed using the wet lay-up technique.

Mica Is A Generic Term Applicable To The Group Of Complex Aluminosilicate Minerals That Occur Naturally In Plate Or Sheet-Like Form.

CompositeWrap™ UDC20 Carbon Fabric is a medium weight, high tensile strength unidirectional carbon fabric. This material is engineered to provide extremely strong, durable and lightweight composites for structural reinforcement. CompositeWrap™ UDC20 Carbon Fabric is easy to apply, corrosion resistant and can be applied at any thickness required to provide adequate structural reinforcement. It easily wets out and can be installed using the wet lay-up technique.

E-LT 1800-P is a E-Glass fiber type.

Style 1280 is 1.60 oz. per square yard (54.25 g/m2) plain weave fiberglass fabric.

C-L 0900 is a carbon fiber type.

TG-18-P is a E-Glass Fiber (Originally known as Electical glass). The most economical and commonly used fiber in the reinforced polymer composite industry with variety of sizes (finish) depending on the resin system process application.

TG-10-T is a E-Glass Fiber (Originally known as Electical glass). The most economical and commonly used fiber in the reinforced polymer composite industry with variety of sizes (finish) depending on the resin system process application.

266 Assembled Roving is specially designed for filament winding process. 266 is compatible with unsaturated polyester resin, and is used in the manufacture of storage tanks and pipes. It is widely used in petroleum, chemical, mining, and electric and electronic applications.

162 Assembled Roving is coated with a special silane-based sizing compatible with unsaturated polyester and vinyl ester resins. Produced from E6 glass, 162 is designed for use in FRP chop applications, offering strong resin absorbability and excellent water resistance and chemical corrosion resistance in the FRP products.

CSV300/45 is Composite felt for pultrusion. It is composed of different types of woven fabrics, multi-axial fabrics and polyester surface felts bonded by hot melt adhesive powder. The weight is 200~900g/㎡, and the width is 50~1500mm. The products are widely used in the production of various pultruded woven products.

Style 1165 is 3.70 oz. per square yard (125.45 g/m2) plain weave fiberglass fabric.

Jiangsu Changhai Composite Materials CHOPPED STRAND MAT EMC225 is fine strand reinforcement material made from E-glass cut fibers laid in a random pattern and bonded with powder or emulsion binder. It is specially designed for hand lay-up and continuous laminating process. It is easy to handle and has excellent molding performance. Also, it has rapid resin penetration together with a fast strand wet out time. The mat also brings a highly translucent finished laminates. Also, the fine strand input makes the fiber prominence at the finished laminates surface extremely low. It is an excellent reinforcement material for translucent roofing panel, chemical storage tanks, FRPpipes, boat hulls and decks, truck body panel and so on.

Twaron® short-cut fiber can raise the performance of a wide range of products, including rubber compounds and engineered plastics.

TC-06-T is a Carbon Fiber which is widely used fiber in high-performance applications, offering an astonishing range of properties.

SC-06-P is a Carbon Fiber which is widely used fiber in high-performance applications, offering an astonishing range of properties.

TX-10-P is a Basalt Fiber which has a chemical composition similar to glass, but what truly distinguishes it from glass is it’s high-melting point, allowing it to be exposed to high temperatures for extended periods of time.

TF-07-T is a Basalt Fiber which has a chemical composition similar to glass, but what truly distinguishes it from glass is it’s high-melting point, allowing it to be exposed to high temperatures for extended periods of time.

US-16-P is a E-Glass Fiber (Originally known as Electical glass). The most economical and commonly used fiber in the reinforced polymer composite industry with variety of sizes (finish) depending on the resin system process application.

Style 108 is 1.40 oz. per square yard (47.47 g/m2) plain weave fiberglass fabric.

3B Fiberglass R25H consist of continuous glass filaments bonded into a single strand and wound onto a bobbin shape. A proprietary sizing applied on the fibers assures excellent resin-to-glass bonding.Corrosion resistant R25H Direct Rovings made of Advantex® glass are specifically designed for filament winding processes (continuous or discontinuous) for the manufacturing of composite pipes. The silane sizing of R25H is designed for excellent adhesion to thermoset resins and is also drinking water contact approved. Also, combination of high temperature resistance of E-CR Advantex® glass and easy texturisation of R25H Direct Rovings make them ideal for muffler filling.R25H Direct Rovings made of Advantex® glass are also used in pultrusion or weaving-knitting processes under specific conditions; contact us for further assistance.

E-LT 2400 is a E-Glass fiber type.

TF-11-T is a Basalt Fiber which has a chemical composition similar to glass, but what truly distinguishes it from glass is it’s high-melting point, allowing it to be exposed to high temperatures for extended periods of time.

468HS roving is used in filament winding and pultrusion applications in epoxide resin systems. The direct rovings can be used to manufacture pipes, tanks and gas cylinders.

TG-15-P is a E-Glass Fiber (Originally known as Electical glass). The most economical and commonly used fiber in the reinforced polymer composite industry with variety of sizes (finish) depending on the resin system process application.

UA-04-P is a Aramid fiber have one of the highest strength to weight ratio compared to other commercially available fibers. Aramid fiber properties depend on the manufacturing process and can vary quite a lot depending on the intended end use.

C-LT 2200 is a carbon fiber type.

Jiangsu Changhai Composite Materials CHOPPED STRAND MAT EMC600 is fine strand reinforcement material made from E-glass cut fibers laid in a random pattern and bonded with powder or emulsion binder. It is specially designed for hand lay-up and continuous laminating process. It is easy to handle and has excellent molding performance. Also, it has rapid resin penetration together with a fast strand wet out time. The mat also brings a highly translucent finished laminates. Also, the fine strand input makes the fiber prominence at the finished laminates surface extremely low. It is an excellent reinforcement material for translucent roofing panel, chemical storage tanks, FRPpipes, boat hulls and decks, truck body panel and so on.

Taishan Fiberglass T940H, direct roving for filament winding is applicable for manufacturing GRP/GRE pipes of various diameters & specifications for water transportation & chemical resistance; high-pressure pipes; pressure vessels, storage tanks and insulation products. It is available with E-glass, TCR glass and S-1 HM™ glass.

VALMIERA GLASS® E-glass is a Needled glass fiber mat with a thermal resistance of 600°C made of alkali-free alumina borosilicate E-glass fiber yarns with a filament diameter of 6 to 13 m and a length of the cut fiber of 30 to 100 mm without any bonding agent.