Products in Pools & Landscaping: Polyesters

Crystic® Spray Gelcoat 976SMK is a chemical resistant, thixotropic and pre-accelerated Iso - NPG gelcoat, designed for the manufacture of swimming pools. It will provide high chemical and hydrolysis resistance. This gelcoat is to be applied by spray with airless machine.

Aekyung Chemical SLO-180NT is an ortho type UPR.

Aekyung Chemical SL-100 is a DCPD type UPR.

Coremat® Xi 4 is the cost effective solution for open mold processes, It is used as core material and/or print blocker It is a polyester nonwoven and compatible with all regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy. It Is suitable for hand lay-up and spray-up process

Soric® XF 1.5 is the cost effective solution for closed mold processes. It is used as core material and infusion medium. It is a pressure stable polyester nonwoven and compatible with all regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy. It is suitable for closed mold processes, including Infusion, RTM Light, RTM Heavy.

ATTSHIELD OP 720 is used in the hand molding and spraying of fiberglass. Allows for the possibility of working at lower temperatures. This resin brand's products have improved hydrolysis resistance, weather resistance, high strength and elongation, and resistance to alkaline environments. Use an accelerator-hardener system to work with resin at room temperature (cobalt octoate-MEKP)

The formulation of our high performance ISO/NPG Gel coats are based on a special ISO/NPG polyester resin. These products were developed to provide good durability and superior flexibility, while keeping high quality finish and minimal maintenance. The combination of neopentylglycol and isophtalic acid provides excellent resistance to water blistering and osmosis, excellent resistance to chlorine and to the UV light.

Coremat® Xi 2 is the cost effective solution for open mold processes, It is used as core material and/or print blocker It is a polyester nonwoven and compatible with all regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy. It Is suitable for hand lay-up and spray-up process

Lerpol 3633 is a high quality OrthoPhtalic resin, RINA approved for boatbuilding. They are formulated for rapid impregnation of fibers, no sagging on vertical surfaces and excellent throughcure. Various formulations are available, suitable for different thicknesses and different operating conditions. They are also available in low styrene emission version.

Coremat® Xi 1 is the cost effective solution for open mold processes, It is used as core material and/or print blocker It is a polyester nonwoven and compatible with all regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy. It Is suitable for hand lay-up and spray-up process

Polipol 3401 is a Hand lay-up / Spray-up polyster.

Soric® XF 6 is the cost effective solution for closed mold processes. It is used as core material and infusion medium. It is a pressure stable polyester nonwoven and compatible with all regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy. It is suitable for closed mold processes, including Infusion, RTM Light, RTM Heavy.

Soric® XF 3 is the cost effective solution for closed mold processes. It is used as core material and infusion medium. It is a pressure stable polyester nonwoven and compatible with all regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy. It is suitable for closed mold processes, including Infusion, RTM Light, RTM Heavy.

Lavecoat OR is an orthoPhtalic gelcoat for general purposes. Easy to apply and with very good hiding power. It is suitable for parts with moderate external weather ability requirements.

Lerpol 384 is a Orthophtalic resins for RTM. They are formulated with and without mineral fillers. Characterized by easy flow, good curing and excellent surface quality.

Lerpol 302 is a ISO-NPG high performance resin. They are formulated for rapid impregnation of fibers, no sagging on vertical surfaces and excellent throughcure. Various formulations are available, suitable for different thicknesses and different operating conditions. They are also available in low styrene emission version.

Soric® TF 2 is the cost effective solution for closed mold processes. It is used as core material and infusion medium. It is a pressure stable polyester nonwoven and compatible with all regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy. It is suitable for closed mold processes, including Infusion, RTM Light, RTM Heavy.

Lerpol Cristal 025 is a clear casting resin. Based on the deep experience and know how acquired in many years of dedication to tailor made solutions.

Lerpol 653 is a orthophtalic resin for casting. Based on the deep experience and know how acquired in many years of dedication to tailor made solutions.

Our Polyester Barrier Coat was developed from a proprietary resin blend with high quality raw materials and special additives. This coating acts as a barrier coat between the laminate and the gelcoat. This formulation provides superior osmosis resistance along with enhanced thermal and cracking resistance properties. Sogel’s Polyester Barrier Coats allow accelerating the cure and the demoulding time, while strongly reducing the risk of print through, orange peel and blisters on gelcoat surface.

Soric® LRC 1.5 is the cost effective solution for closed mold processes. It is used as core material and infusion medium. It is a pressure stable polyester nonwoven and compatible with all regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy. It is suitable for closed mold processes, including Infusion, RTM Light, RTM Heavy.

Soric® XF 4 is the cost effective solution for closed mold processes. It is used as core material and infusion medium. It is a pressure stable polyester nonwoven and compatible with all regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy. It is suitable for closed mold processes, including Infusion, RTM Light, RTM Heavy.

Coremat® XM 4 is the cost effective solution for open mold processes, It is used as core material and/or print blocker It is a polyester nonwoven and compatible with all regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy. It Is suitable for hand lay-up and spray-up process

Coremat® XM 3 is the cost effective solution for open mold processes, It is used as core material and/or print blocker It is a polyester nonwoven and compatible with all regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy. It Is suitable for hand lay-up and spray-up process

Soric® XF 10 is the cost effective solution for closed mold processes. It is used as core material and infusion medium. It is a pressure stable polyester nonwoven and compatible with all regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy. It is suitable for closed mold processes, including Infusion, RTM Light, RTM Heavy.

Soric® LRC 3 is the cost effective solution for closed mold processes. It is used as core material and infusion medium. It is a pressure stable polyester nonwoven and compatible with all regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy. It is suitable for closed mold processes, including Infusion, RTM Light, RTM Heavy.

Lavecoat IO is based on IsoPhtalic resin, provide very protection and good mechanical performance in external applications with exposure to water and sunlight.

Soric® LRC 2 is the cost effective solution for closed mold processes. It is used as core material and infusion medium. It is a pressure stable polyester nonwoven and compatible with all regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy. It is suitable for closed mold processes, including Infusion, RTM Light, RTM Heavy.

Polipol 339-TA-LSE-H40 is a Hand lay-up / Spray-up medium reactivity thixotropic preaccelarated LSE polyster.

Soric® SF 3 is the cost effective solution for closed mold processes. It is used as core material and infusion medium. It is a pressure stable polyester nonwoven and compatible with all regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy. It is suitable for closed mold processes, including Infusion, RTM Light, RTM Heavy.

Soric® XF 5 is the cost effective solution for closed mold processes. It is used as core material and infusion medium. It is a pressure stable polyester nonwoven and compatible with all regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy. It is suitable for closed mold processes, including Infusion, RTM Light, RTM Heavy.

Polipol 3401-TA-H20 is a Hand lay-up / Spray-up thixotropic preaccelarated polyster.

Aekyung Chemical SL-112 is an ortho type UPR.

Lerpol 312 is a IsoPhtalic resin for infusion. They are formulated with and without mineral fillers. Characterized by easy flow, good curing and excellent surface quality.