Products in Siding & Trim: Good Mechanical Properties

Crystic® Polyester Resin U904LVK is an orthophtalic, pre accelerated, non thixotropic, unsaturated polyester resin. It has to be used when good mechanical properties and good heat resistance are required. The product has been designed to be catalysed with a conventional MEKP at 50% while giving a very fast demold time under quite low exotherm.

Esschem MMA Bead Copolymers are a collection of methyl methacrylate (MMA) bead polymers renowned for their exceptional properties.These polymers exhibit impressive features such as high glass transition temperature, melting point, tensile strength, and impact resistance.Esschem meticulously controls the reaction conditions to create polymers with specific molecular weight distributions, allowing for a wide range of desired properties. This precise control enhances the inherent strength, rigidity, and impact resistance of MMA polymers.Moreover, by carefully manipulating the particle size, Esschem offers the flexibility to customize properties such as hardness, toughness, and processability.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Polynt Group BMC LP 250/22 RF is a bulk molding compound based on an unsaturated polyester resin, fire retardant grade, halogen-free, reinforced with glass fibers. This BMC has been developed for electrical application. Good mechanical properties and good surface are combined into the BMC RF 1600/20. BMC RF 1600/20 is formulated according to RoHS, REAC regulation SVHC and WEEE European legislation.

Polynt Group SMC LPMC 7000 LP is a sheet molding compound based on an unsaturated polyester resin reinforced with glass fibers. SMC LPMC 7000 LP is studied to be molded at low pressure. This SMC has been developed for structural parts SMC LPMC 7000 LP joint good mechanical properties and good varnish adhesion. SMC LPMC 7000 LP is formulated according to RoHS, REAC regulation SVHC and WEEE European legislation.

Stypol® APMV4000 - polymethylmethacrylate low profile additive. For use in SMC, BMC and wet molding applications. Excellent mechanical properties and heat resistance. Main applications areas are electronic and electrical, home and domestic applications, industrial sector etc.

Polynt Group SMC 3500 Duralynt is a sheet molding compound based on an unsaturated polyester resin reinforced with glass fibers. This material has been developed to show a high weathering resistance. SMC 3500 Duralynt joints good mechanical properties and good flow SMC 3500 Duralynt is formulated according to RoHS, REAC regulation SVHC and WEEE European legislation.

POLYCOR® ISO NPG PA WHITE 9199 - A pre-accelerated gel coat based on Isophthalic Neopentylglycol unsaturated polyester resin. It is cured using MEKP peroxide.This high performance gel coat is formulated for use in sanitary and marine applications or GRP application where resistance to water and blistering are needed.

Distitron® 412 V2 - resin for body, good mechanical properties. Main applications areas are agrochemical, agrobusiness, building and construction, industrial sector etc.

Polynt Group SMC 4200 R23 is a sheet molding compound based on an unsaturated polyester resin reinforced with glass fibers. This SMC has been developed for sink and tray application. SMC 4200 R23 joints good mechanical properties with stain and chemical resistance. SMC 4200 R23 has been studied to show a uniform pigmentation on the part molded. SMC 4200 R23 is formulated according to RoHS, REAC regulation SVHC and WEEE European legislation.

IKAMOD 135A is a synthetic material, kind of thermoplastic elastomer, made from high density polyethylene (HDPE) and chlorine. This chlorinated polyethylene (CPE) material is designed as an additive to improve the mechanical properties of opaque rigid PVC, suitable for both indoor and outdoor applications. It has very good mechanical properties (elongation at break, tensile strength) and very good toughness.

POLYCOR® ISO PA WHITE 9199 - A pre-accelerated gel coat based on Isophthalic unsaturated polyester resin. It is cured using MEKP peroxide.This gel coat is formulated to meet the rigid requirements of transportation,boating and sanitary applications.

Goldstab Organics 3016 N Provides higher output, reducing the processing cost & excellent mechanical and esthetic properties.

Polynt Group BMC 860 Duralynt is a bulk molding compound based on an unsaturated polyester resin, reinforced with glass fibers this material has been developed to show a high weathering resistance. BMC 860 Duralynt joints good mechanical properties and good flow BMC 860 Duralynt is formulated according to RoHS, REAC regulation SVHC and WEEE European legislation.

IKAMOD 102S4 is a special grafted copolymer designed to improve the mechanical properties of opaque rigid PVC, suitable for both indoor and outdoor applications. Compared to standard CPE and acrylic impact modifiers, it imparts much higher elongation at break and excellent toughness whilst maintaining outstanding impact resistance.

POLYCOR® TOP COAT PA WHITE 9199 - A pre-accelerated top coat based on Isophthalic unsaturated polyester resin. It is cured using MEKP peroxide.This TOP COAT product is formulated to be applied to the back surface of laminates to provide a tack free surface finish. It should not be used as a gel coat. This topcoat is formulated to meet the rigid requirements of transportation,boating and sanitary applications.

IKAMOD 105 is a special grafted copolymer designed to improve the mechanical properties of opaque rigid PVC, suitable for both indoor and outdoor applications. Compared to standard CPE and acrylic impact modifiers, it imparts much higher elongation at break and excellent toughness whilst maintaining outstanding impact resistance.

WELLPREN® IM888 is most suitable for substitution of Acrylic impact modifier (AIM) or blending with Acrylic impact modifier (AIM) with a certain percentage without adjusting the processing data and the formulation, resulting in an optimum performance /cost solution. All in, WELLPREN®RESIN helps fabricators and compounders meet increasing critically performance requirements and cost control needs.

POLYCOR® ISO NPG BR WHITE 9199 - A pre-accelerated gel coat based on Isophthalic Neopentylglycol unsaturated polyester resin. It is cured using MEKP peroxide.This high performance gel coat is formulated for use in sanitary and marine applications or GRP application where resistance to water and blistering are needed

DISTITRON® 184 - Unsaturated polyester resin in styrene,Isophthalic-Neopentylic. It is used to produce bmc and smc manufacture,very good mechanical properties through hot press molding method.

POLYCOR® ISO BR WHITE 9199 - A pre-accelerated gel coat based on Isophthalic unsaturated polyester resin. It is cured using MEKP peroxide.This gel coat is formulated to meet the rigid requirements of transportation,boating and sanitary applications.

POLYCOR® TOP COAT BR WHITE 9199 - A pre-accelerated top coat based on Isophthalic unsaturated polyester resin. It is cured using MEKP peroxide.This TOP COAT product is formulated to be applied to the back surface of laminates to provide a tack free surface finish. It should not be used as a gel coat. This topcoat is formulated to meet the rigid requirements of transportation,boating and sanitary applications.

Polynt Group SMC 4500 R23 is a sheet molding compound based on an unsaturated polyester resin reinforced with glass fibers. This SMC has been developed for sink and tray application. SMC 4500 R23 joints good mechanical properties with stain and chemical resistance. SMC 4500 R23 has been studied to show a decorative effect on the part molded. SMC 4500 R23 is formulated according to RoHS, REAC regulation SVHC and WEEE European legislation.