Products in Structural Components: Marine Applications

LINCORE® CP PP 20 is a compound reinforced with 30% by mass of flax fibers.

LINCORE® PLA FF P2 40 400 is a fabric made of LINCORE® roving (commingled flax and PLA filaments). Consolidation is done by heating above melting temperature of PLA matric (170°C-200°C) and applying a low pressure (1-30 bars), before a cooling step under pressure.The molding can be realized by diaphragm (1 to 8 bars)- Thermo compression (10 to 200 bars) - Sandwich thermo compression (1 to 5 bars).

LINCORE® PP FF P2 40 400 is a fabric made of LINCORE® roving (commingled flax and PP filaments). Consolidation is done by heating above melting temperature of PP matrix (180°C-230°C) and applying a low pressure (1-30 bars), before a cooling step under pressure. The molding can be realized by : Diaphragm (1 to 8 bars), Thermo compression (10 to 200 bars), Sandwich thermo compression (1 to 5 bars).

LINCORE® CP PLA 30 is a compound reinforced with 30% by mass of flax fibers.

LINCORE® CP ABS 50 is a compound reinforced with 50% by mass of flax fibers.

Nycast® Nyloil®MDX Blue offers three grades of self-lubricating Nylon bearing material tailored to meet your specific application. A cast nylon with built-in oil lubrication, NYLOIL provides superior machinability, performance, and durability compared to other plastic and traditional bearing materials. Three grades of NYLOIL are available to fit the most demanding applications: original green NYLOIL for most bearing applications; food-grade, Natural NYLOIL-FG for direct contact with food, and MoS2 filledNYLOIL-MDX with slightly higher compressive load capabilities than original NYLOIL. The incorporation of an oil lubricant package into the nylon matrix provides significant advantages over other bearing materials: NYLOIL-MDX is formulated with Molybdenum Disulfide filler, which promotes higher crystallinity in the cast polymer, in addition to the oil lubricant package. This yields a bearing material with more consistent intermolecular structure and generally a narrower distribution within the range of physical property values, while retaining the advanced friction properties of unfilled NYLOIL.

LINCORE® CP PVC 30 is a compound reinforced with 30% by mass of flax fibers.

Nycast® Nyloil®MDX Gray provides superior machinability, performance, and durability compared to other plastic and traditional bearing materials. Three grades of NYLOIL are available to fit the most demanding applications: original green NYLOIL for most bearing applications; food-grade, Natural NYLOIL-FG for direct contact with food, and MoS2 filledNYLOIL-MDX with slightly higher compressive load capabilities than original NYLOIL. The incorporation of an oil lubricant package into the nylon matrix provides significant advantages over other bearing materials: NYLOIL-MDX is formulated with Molybdenum Disulfide filler, which promotes higher crystallinity in the cast polymer, in addition to the oil lubricant package. This yields a bearing material with more consistent intermolecular structure and generally a narrower distribution within the range of physical property values, while retaining the advanced friction properties of unfilled NYLOIL.

Nycast® Nyloil FG can be in direct contact with foods. This material is a perfect substitute for stainless steel due to its high wear resistance, combined with low moisture absorption and good resistance against most cleaning agents. The incorporated oil enables most applications to run without additional lubrication. Multiple color options are available.