Products in Structural Components: Light Weight

SymaLITE is a special class of lightweight composites that offer low thermal expansion and exceptional mechanical and physical properties. Made from mixed glass and polymer fiber fleeces, SymaLITE is available in rolls and boards, which can be further molded into three-dimensional components using low-pressure molding.Features:Low thermal expansionExcellent mechanical and physical propertiesUltra-light and freely shapeableNoise-absorbentDirect facing with functional or decorative cover layers without adhesivesBenefits:Cost-efficient production of three-dimensional componentsDurable and noise-insulating material for car undershields and engine coversImpact-resistant and non-weathering for outdoor applications in the automotive and construction industrySubstitute for wood-based materials and rigid foams in sandwich constructions for the caravan and commercial vehicle industry.Applications:Automotive and caravan industryConstruction sectorCar headlinersOutdoor applications in the automotive and caravan industrySubstitute for wood-based materials and rigid foams in sandwich constructions for the caravan and commercial vehicle industry.

Mitsubishi Chemical Advanced Materials is considered the world market leader in the production of classic glass-mat-reinforced thermoplastics (GMT). This semi-finished product in panel form was developed primarily as a substitute for metals (steel, aluminum etc.) and its main purchasers can be found in the automotive industry. This is where it is frequently pressed on the industrial scale into complex 3D structural components, although it is also used as panels.

Noblen® HGZ 1200 Natural is a polypropylene, high crystalline homopolymer with ultra high melt flow, making it great for thin wall molding applications. Applications: Packaging Trim requires excellent balance of flow and stiffness.   Features: Which has high surface hardness Good scratch resistance.

Espolex® CPD-450 is a Thermoplastic Elastomer which processes like a thermoplastic and acts like a rubber with excellent flowability. Good balance of stiffness and durometer. Applications: Bin and Floor Mats Appliances Automotive Exterior Trim Automotive Interior Trim Boat Jet-Propelled Vehicle Mud Flaps Weatherstripping Over-molding Injection Molded Parts   Features: Heat Stabilized Black High Melt Flow   Benefits: Anti slip Noise reduction

Espolex® 3785A is a TPV known for its excellent colorability and appearance. It demonstrates strong adhesion to polypropylene compounds and polyethylene, processing like a thermoplastic while acting like a rubber.   Applications: Automotive interior (gaskets, grips, etc.) Automotive exterior Gaskets Mats Overmolding Bathroom accessories Boats Floor mats Jet-propelled vehicles Mud flaps Weatherstripping Injection molded parts   Features: High flowability Rubber-like elasticity and feel   Benefits: Recyclable

Espolex® 3675A is a TPV known for its excellent colorability and appearance. It exhibits strong adhesion to polypropylene compounds and polyethylene, while possessing thermoplastic processing characteristics and rubber-like properties.   Applications: Automotive interior (gaskets, grips, etc.) Automotive exterior trim Seat belt sleeves Gaskets Floor mats Overmolding Bathroom accessories Boats Jet-propelled vehicles Mud flaps Weatherstripping Injection molded parts   Features: High flowability Rubber-like elasticity and feel   Benefits: Recyclable

Espolex® WT570 is a Thermoplastic Elastomer with high impact performance and excellent processability at extrusion molding. It shows good impact performance, especially at low temperatures.   Applications: Automotive Interior Trim Airbag Cover Cable Hose Boat Jet-propelled Vehicle Extruded Parts Injection-molded parts   Features: Excellent impact performance at low temperatures well-balanced mechanical property   Benefits: Mold-in-Color Recyclable

Noblen® CHN-250 Natural is a talc-filled polypropylene impact copolymer with high stiffness. It is used in automotive interior applications requiring an excellent balance of impact, flow, and stiffness. This product is suitable for Injection molding.   Applications: Large components Appliances Automotive Interior Trim Boat Jet-propelled Vehicle   Features: Good stiffness with impact performance and high Melt flow   Benefits: Easy to fill large parts

Noblen® AGM 250 Natural is a polypropylene impact copolymer with excellent cold temperature impact strength. True reactor grade with medium flow ability Low-stress whitening   Applications: Large parts requiring high impact. Appliances Automotive Interior Trim Head Impact Boat Jet-propelled Vehicle   Features: -20 ⁰C Temperature Ductility Good Scratch Resistance     Benefits: Low-stress whitening High Melt flow and impact balance Consistently easy to color

SANMODUR MH-20E is tooling material (chemical board) for models & molds in various processes. It has light weight, smooth surface, excellent machinability and antistatic property painting processes can be simplified and applicable to design models, styling models etc.

SANMODUR MH-15E is tooling material (chemical board) for models & molds in various processes. It has light weight, smooth surface, excellent machinability and antistatic property painting processes can be simplified and applicable to design models, styling models etc.

SANMODUR MH-8E is tooling material (chemical board) for models & molds in various processes. It has light weight, smooth surface, excellent machinability and antistatic property painting processes can be simplified and applicable to design models, styling models etc.

SANMODUR MH-5E is tooling material (chemical board) for models & molds in various processes. It has light weight, smooth surface, excellent machinability and antistatic property painting processes can be simplified and applicable to design models, styling models etc.

SANMODUR MH-E is tooling material (chemical board) for models & molds in various processes. It has light weight, smooth surface, excellent machinability and antistatic property painting processes can be simplified and applicable to design models, styling models etc.

SANMODUR MH-3E is tooling material (chemical board) for models & molds in various processes. It has light weight, smooth surface, excellent machinability and antistatic property painting processes can be simplified and applicable to design models, styling models etc.

SANMODUR MH-10E is tooling material (chemical board) for models & molds in various processes. It has light weight, smooth surface, excellent machinability and antistatic property painting processes can be simplified and applicable to design models, styling models etc.

A non-draining, 100% solids, no VOCs epoxy system for producing fiber reinforced epoxy composites. A single resin (StrongBond™ 400A Saturant Resin-Part A) with available choices of curing agents provides the maximum flexibility for a variety of fiber reinforced applications

A non-draining, 100% solids, no VOCs epoxy system for producing fiber reinforced epoxy composites. A single resin (StrongBond™ 400A Saturant Resin-Part A) with available choices of curing agents provides the maximum flexibility for a variety of fiber reinforced applications

A non-draining, 100% solids, no VOCs epoxy system for producing fiber reinforced epoxy composites. A single resin (StrongBond™ 400A Saturant Resin-Part A) with available choices of curing agents provides the maximum flexibility for a variety of fiber reinforced applications

A non-draining, 100% solids, no VOCs epoxy system for producing fiber reinforced epoxy composites. A single resin (StrongBond™ 400A Saturant Resin-Part A) with available choices of curing agents provides the maximum flexibility for a variety of fiber reinforced applications

ACM CG600X is Multiaxial Hybrid Fabrics with Standard fabric width of1270 mm having EP/VE Resin compatibility Multiaxial fabrics are textile materials made of several layers of high-strength composite fibers stitched together with thin threads. Multiaxial fabric can be carbon, glass, basalt, and hybrid according to the source fibers.

LINCORE® PP FF P2 40 400 is a fabric made of LINCORE® roving (commingled flax and PP filaments). Consolidation is done by heating above melting temperature of PP matrix (180°C-230°C) and applying a low pressure (1-30 bars), before a cooling step under pressure. The molding can be realized by : Diaphragm (1 to 8 bars), Thermo compression (10 to 200 bars), Sandwich thermo compression (1 to 5 bars).

LINCORE® PLA FF P2 40 400 is a fabric made of LINCORE® roving (commingled flax and PLA filaments). Consolidation is done by heating above melting temperature of PLA matric (170°C-200°C) and applying a low pressure (1-30 bars), before a cooling step under pressure.The molding can be realized by diaphragm (1 to 8 bars)- Thermo compression (10 to 200 bars) - Sandwich thermo compression (1 to 5 bars).

GRANOC YARN XN-60-A2S used for industrial and sports application.

Nycast® 6PA MoS2 is used in metal applications for lubrication and has delivered successful performance throughout the years. The main advantages of NYCAST 6PA MoS2are:.

E-SPHERES® SL350 are Coarse Grade White Hollow Ceramic Microspheres.

ACM CG600B is Multiaxial Hybrid Fabrics with Standard fabric width of1270 mm having EP/VE Resin compatibility Multiaxial fabrics are textile materials made of several layers of high-strength composite fibers stitched together with thin threads. Multiaxial fabric can be carbon, glass, basalt, and hybrid according to the source fibers.

C10004068T is Wet-laid nonwovens consisting of 7-um diameter carbon fiber staple (1/4”&1/2") with 1-20 wt.% of cross-linked polyester binder. (Other binders available.). Widths can be specified.

ACM C300B is Multiaxial Carbon Fabrics with Standard fabric width of1270 mm having EP/VE Resin compatibility Multiaxial fabrics are textile materials made of several layers of high-strength composite fibers stitched together with thin threads. Multiaxial fabric can be carbon, glass, basalt, and hybrid according to the source fibers.

NIDAPLAST® 8HP is inflammable and it has excellent resistance to water and most acids, bases and salt solutions.The longevity for the core's storage is guaranteed by a anti U.V. - U.V. Protection of the finished panel is ensured by the skins of the sandwich panel.

TYCOR® W7.1 provides designers a cost advantage compared to balsa and structural foam. The fiber-reinforced pre-form core is designed for vacuum infusion. It is comprised of fiberglass webs which develop nearly allthe core’s mechanical properties upon infusing and helps prevent resin race tracking even in contoured shapes. Fine cell foam minimizes excess resin absorption and provides durability during handling and processing. TYCOR® W0.1 engineered core materials optimize weight, stiffness and strength in infused applications enabling structures that can be made lighter, less expesively and more reliably than old generation core materials.

Kayco Composites R25 is a rigid, closed-cell, high-density polyurethane foam core panel. The reinforced panel is a sandwich construction with fiberglass reinforcements. The fiberglass reinforcements are offered in several schedules.

C10004020T is Wet-laid nonwovens consisting of 7-um diameter carbon fiber staple (1/4”&1/2") with 1-20 wt.% of cross-linked polyester binder. (Other binders available.). Widths can be specified.

Kayco Composites U20 is a rigid, closed-cell, high-density polyurethane foam core panel. It is a foam with no reinforcement.

The TPS ValueGuard® Hurricane Panels are manufactured using the highest quality proprietary UV resistant polymers available. The TPS ValueGuard® Hurricane Panels offer most of the features of our premium ClearGuard® product, but at substantial savings. Flood Your Home's Interior with Natural Sunlight - ValueGuard® Hurricane Panels transmit up to 45% of available exterior natural light, allowing for more normal conditions in your home, especially during periods of power outages resulting from severe storms. With TPS ValueGuard® Hurricane Panels installed, you are no longer dependent on candles or flashlights. Virtually all available ambient daylight is transmitted directly into your home or business with TPS ValueGuard® Hurricane Panels, giving you a safer, more normal environment.

Resinoid 2277 is a chopped fabric reinforced, two-step phenolic molding compound. It was specifically developed for molding applications where a lightweight, high strength material with good impact strength is needed. This material comes in pelletized from and is suitable for transfer or compression molding and can be used in injection molding systems with deep flight screws. Resinoid 2277 meets the requirements of ASTM D-5948 CFI-20 (Formerly MIL M14/1 CFI-20).