Products in Wall Panels: Polyolefins

Mitsubishi Chemical Advanced Materials is considered the world market leader in the production of classic glass-mat-reinforced thermoplastics (GMT). This semi-finished product in panel form was developed primarily as a substitute for metals (steel, aluminum etc.) and its main purchasers can be found in the automotive industry. This is where it is frequently pressed on the industrial scale into complex 3D structural components, although it is also used as panels.

Espolex® 3785A is a TPV known for its excellent colorability and appearance. It demonstrates strong adhesion to polypropylene compounds and polyethylene, processing like a thermoplastic while acting like a rubber.   Applications: Automotive interior (gaskets, grips, etc.) Automotive exterior Gaskets Mats Overmolding Bathroom accessories Boats Floor mats Jet-propelled vehicles Mud flaps Weatherstripping Injection molded parts   Features: High flowability Rubber-like elasticity and feel   Benefits: Recyclable

Espolex® CPD-450 is a Thermoplastic Elastomer which processes like a thermoplastic and acts like a rubber with excellent flowability. Good balance of stiffness and durometer. Applications: Bin and Floor Mats Appliances Automotive Exterior Trim Automotive Interior Trim Boat Jet-Propelled Vehicle Mud Flaps Weatherstripping Over-molding Injection Molded Parts   Features: Heat Stabilized Black High Melt Flow   Benefits: Anti slip Noise reduction

Noblen® HGZ 1200 Natural is a polypropylene, high crystalline homopolymer with ultra high melt flow, making it great for thin wall molding applications. Applications: Packaging Trim requires excellent balance of flow and stiffness.   Features: Which has high surface hardness Good scratch resistance.

Espolex® 3675A is a TPV known for its excellent colorability and appearance. It exhibits strong adhesion to polypropylene compounds and polyethylene, while possessing thermoplastic processing characteristics and rubber-like properties.   Applications: Automotive interior (gaskets, grips, etc.) Automotive exterior trim Seat belt sleeves Gaskets Floor mats Overmolding Bathroom accessories Boats Jet-propelled vehicles Mud flaps Weatherstripping Injection molded parts   Features: High flowability Rubber-like elasticity and feel   Benefits: Recyclable

Noblen® CHN-250 Natural is a talc-filled polypropylene impact copolymer with high stiffness. It is used in automotive interior applications requiring an excellent balance of impact, flow, and stiffness. This product is suitable for Injection molding.   Applications: Large components Appliances Automotive Interior Trim Boat Jet-propelled Vehicle   Features: Good stiffness with impact performance and high Melt flow   Benefits: Easy to fill large parts

Espolex® WT570 is a Thermoplastic Elastomer with high impact performance and excellent processability at extrusion molding. It shows good impact performance, especially at low temperatures.   Applications: Automotive Interior Trim Airbag Cover Cable Hose Boat Jet-propelled Vehicle Extruded Parts Injection-molded parts   Features: Excellent impact performance at low temperatures well-balanced mechanical property   Benefits: Mold-in-Color Recyclable

Noblen® AGM 250 Natural is a polypropylene impact copolymer with excellent cold temperature impact strength. True reactor grade with medium flow ability Low-stress whitening   Applications: Large parts requiring high impact. Appliances Automotive Interior Trim Head Impact Boat Jet-propelled Vehicle   Features: -20 ⁰C Temperature Ductility Good Scratch Resistance     Benefits: Low-stress whitening High Melt flow and impact balance Consistently easy to color

AGC Chemicals Americas, Inc. Fluon® ETFE Film - Advanced Fluoropolymer Film 12N is a high-performance film made from AGC’s own ETFE resin. The film has excellent heat and chemical resistance, anti-stick properties, electrical properties and long-term weatherability; properties typically associated with fluoropolymers. Due to its exceptional durability, transparency and antifouling properties Fluon® ETFE Film is used in a wide range of applications such as mold release film for electronic components, interior design, outdoor architectural applications, solar cells, greenhouses and a whole host of other innovative areas.

AOC® USH-0558 is a water-soluble AOC® polymer coating that makes implants easier to insert into tissue pockets by reducing "tissue grab." The coating prevents debris from accumulating within the implant's pores. Uncoated versions are also available.

AOC® USH-1558 is a water-soluble AOC® polymer coating that makes implants easier to insert into tissue pockets by reducing "tissue grab." The coating prevents debris from accumulating within the implant's pores. Uncoated versions are also available.

JSR EP35 is typical High Mooney Viscosity and high ENB content.

AOC® USP-0016 is a water-soluble AOC® polymer coating that reduces "tissue grab," making implants easier to insert into the socket or scleral envelope. The coating prevents debris from accumulating within the pores of the implant. Uncoated options are also available.

JSR EP65 is improved processability type EP35.

JSR EP33 is Typical low Mooney Viscosity and has high ENB content.

Natex P-Preg PP P1/1 900 is a powder-coated fabric woven from flax fibers that are pre-impregnated with thermoplastic resins. It comes as NATTEX® P-Preg, Polypropylene with 1000 mm Width and pre-preg fabrics uni-directional in natural fibers with flax of 900 g/m2.

Versitex® VX10 is a cost-effective thermoplastic liner comprised of polypropylene resin reinforced with continuous bi-directional glass fibers to create high impact resistant panels. It resists rot, corrosion, and mildew and is not affected by cleaning related chemicals. Versitex VX Series wall panels provide significant energy absorption over traditional FRP panels and exhibit thermal expansion similar to aluminum. The bi-directional nature of Versitex provides consistent physical properties throughout the entire panel. Versitex is easily repaired by applying low heat.

AOC® USH-0858 is a water-soluble AOC® polymer coating that makes implants easier to insert into tissue pockets by reducing "tissue grab." The coating prevents debris from accumulating within the implant's pores. Uncoated versions are also available.

AOC® USH-3054 is a water-soluble AOC® polymer coating that makes implants easier to insert into tissue pockets by reducing "tissue grab." The coating prevents debris from accumulating within the implant's pores. Uncoated versions are also available.

Yparex® 9403 M is a family of maleic-anhydride-(MAH)-functionalised polyolefins. For each of its many application areas Yparex® has suitable grades. The grades are characterized by density and melt flow index, melting temperature and the level of functional groups. Functionality for the varying application range is also obtained by using a large array of different base polymers and production technologies. The materials are produced under the highest quality standards allowing no residual unbonded maleic anhydride in the final product.

Shandong Xuye New Materials CPE135A is the general brand of plastic hardware products modification. It has good plasticization performance and no agglomeration. It is widely used in section bar, tubing and panel. It can better improve the shock resistance of products.

AOC® USP-0019 is a water-soluble AOC® polymer coating that reduces "tissue grab," making implants easier to insert into the socket or scleral envelope. The coating prevents debris from accumulating within the pores of the implant. Uncoated options are also available.

AOC® USH-3058 is a water-soluble AOC® polymer coating that makes implants easier to insert into tissue pockets by reducing "tissue grab." The coating prevents debris from accumulating within the implant's pores. Uncoated versions are also available.

AOC® USH-0854 is a water-soluble AOC® polymer coating that makes implants easier to insert into tissue pockets by reducing "tissue grab." The coating prevents debris from accumulating within the implant's pores. Uncoated versions are also available.

RubberGard™ Platinum EPDM PT is a non-reinforced EPDM membrane panel with 6" (152.4 mm) wide QuickSeamTM tape factory laminated continuously along one lengthwise edge of the panel. The pre-applied tape is flush with the edge of the membrane.

AOC® USP-0018 is a water-soluble AOC® polymer coating that reduces "tissue grab," making implants easier to insert into the socket or scleral envelope. The coating prevents debris from accumulating within the pores of the implant. Uncoated options are also available.

RubberGard™ MAX PT Membrane features our RubberGard Max (reinforced) EPDM membrane with factory laminated 6" (152 mm) or 3′′ (76 mm) wide QuickSeamTM tape extending continuously along one 100' (30.5 m) edge of the panel. The pre-applied tape extends slightly beyond the edge of the MAX PT membrane to form a selvage edge.

AOC® USP-0021 is a water-soluble AOC® polymer coating that reduces "tissue grab," making implants easier to insert into the socket or scleral envelope. The coating prevents debris from accumulating within the pores of the implant. Uncoated options are also available.

AOC® USP-0020 is a water-soluble AOC® polymer coating that reduces "tissue grab," making implants easier to insert into the socket or scleral envelope. The coating prevents debris from accumulating within the pores of the implant. Uncoated options are also available.

Versitex® VX3 is a cost-effective thermoplastic liner comprised of polypropylene resin reinforced with continuous bi-directional glass fibers to create high impact resistant panels. It resists rot, corrosion, and mildew and is not affected by cleaning related chemicals. Versitex VX Series wall panels provide significant energy absorption over traditional FRP panels and exhibit thermal expansion similar to aluminum. The bi-directional nature of Versitex provides consistent physical properties throughout the entire panel. Versitex is easily repaired by applying low heat.

Natex P-Preg PP UD 750 is a powder-coated fabric woven from flax fibers that are pre-impregnated with thermoplastic resins. It comes as NATTEX® P-Preg, Polypropylene with 1000 mm Width and pre-preg fabrics uni-directional in natural fibers with flax of 750 g/m2.