Products in Wall Panels: High Strength

Crystic® Polyester Resin 272 is an isophthalic polyester resin. It is recommended for use in high-performance applications using filament winding, pultrusion, and centrifugal or contact molding processes. The fully cured laminates have high mechanical strength and excellent strength retention in wet environments at temperatures up to 60ºC.

SANMODUR LC-5M is tooling material (chemical board) for models & molds in various processes. It is light weight and has excellent machinability. It has excellent dimensional stability, heat resistance and strength.

SANMODUR LC-10M is tooling material (chemical board) for models & molds in various processes. It is light weight and has excellent machinability. It has excellent dimensional stability, heat resistance and strength.

SANMODUR LC-15M is tooling material (chemical board) for models & molds in various processes. It is light weight and has excellent machinability. It has excellent dimensional stability, heat resistance and strength.

SANMODUR LC-20M is tooling material (chemical board) for models & molds in various processes. It is light weight and has excellent machinability. It has excellent dimensional stability, heat resistance and strength.

Abdullah Al Barrak Plastic Products Polycarbonate Diamond Sheet 1000 x 2000has an attractive diamond embossed pattern. The sheets are stronger and flexible, providing superior spanning and load-bearing capabilities. Polycarbonate Diamond sheets can also withstand extremes of temperature more readily than other material and with Long life UV protection, they are also more resistant to the long-term effects of weathering. Polycarbonate Diamond Sheets has several characters with high impact resistance, lightweight and can be easily cold bend processed and hot molding can be done. Hence, it can be widely used in construction and decorations. We present to our clients superior quality sheets, manufactured by the well qualified and experienced engineers of by using high-grade raw material and components at our manufacturing unit.

Tubus Bauer GmbH PC 4,0-80 is a tubus core made with Polycarbonate.

LUMAsite® Ivory 02146-SOS is Creamy white and translucent in nature.

Thermo-Cor™ FR 7.0 phenolic foam is a rigid, semi-closed celled, foam that comes in a full range of densities from 2.0 pcf to 40.0 pcf.Thermo-Cor FR has a higher compression strength ratio than competing phenolic foams of the same density. Its superior structural strength makes it well suited for stand-alone panels and stress skins used either as thermal or acoustical insulation for commercial applications, especially in hospitals, nursing homes and other public places where low smoke and toxicity are important.

Tubus Bauer GmbH PC 6,0-70 is a tubus core made with Polycarbonate.

LUMAsite® Brown 239-SO is Dark brown and opaque.

Technobasalt® Basalt Rebar ANPB is a rod with continuous spiral ribbing, formed by winding it with a basalt yarn moistened with a high-strength polymer compound. It is a promising composite material with a wide range of applications in construction.Basalt rebar is resistant to corrosion and aggressive chemical compounds, is unusually light and durable. The research results showed that the durability of building structures with basalt reinforcement significantly exceeds the service life of similar structures made of other materials.

Versitex® VX10 is a cost-effective thermoplastic liner comprised of polypropylene resin reinforced with continuous bi-directional glass fibers to create high impact resistant panels. It resists rot, corrosion, and mildew and is not affected by cleaning related chemicals. Versitex VX Series wall panels provide significant energy absorption over traditional FRP panels and exhibit thermal expansion similar to aluminum. The bi-directional nature of Versitex provides consistent physical properties throughout the entire panel. Versitex is easily repaired by applying low heat.

Technobasalt® Fiber is a unique material that transfers the power of nature to new technologies!Basalt fiber is a piece of complex basalt fiber of fixed length. Depending on the customer’s requirements, basalt fiber can be supplied both in the form of crumbly monofilaments, and in the form of pieces of complex basalt fibers glued together.

Thermo-Cor™ FR 2.0 phenolic foam is a rigid, semi-closed celled, foam that comes in a full range of densities from 2.0 pcf to 40.0 pcf.Thermo-Cor FR has a higher compression strength ratio than competing phenolic foams of the same density. Its superior structural strength makes it well suited for stand-alone panels and stress skins used either as thermal or acoustical insulation for commercial applications, especially in hospitals, nursing homes and other public places where low smoke and toxicity are important.

Thermo-Cor™ FR 15.0 phenolic foam is a rigid, semi-closed celled, foam that comes in a full range of densities from 2.0 pcf to 40.0 pcf.Thermo-Cor FR has a higher compression strength ratio than competing phenolic foams of the same density. Its superior structural strength makes it well suited for stand-alone panels and stress skins used either as thermal or acoustical insulation for commercial applications, especially in hospitals, nursing homes and other public places where low smoke and toxicity are important.

Thermo-Cor™ FR 20.0 phenolic foam is a rigid, semi-closed celled, foam that comes in a full range of densities from 2.0 pcf to 40.0 pcf.Thermo-Cor FR has a higher compression strength ratio than competing phenolic foams of the same density. Its superior structural strength makes it well suited for stand-alone panels and stress skins used either as thermal or acoustical insulation for commercial applications, especially in hospitals, nursing homes and other public places where low smoke and toxicity are important.

E-Fiberglass Warp Triaxial can be used in a variety of applications in the automotive, aerospace, construction, corrosive, industrial and marine industries. NCF is a composite reinforcing fabric in which fibers are organized into layers of plies of variable weight and orientation. The layers are stitched together. The result is a range of engineered fabrics with predictable, repeatable properties for the composite industry. Triaxial Longitudinal (Warp Triaxial) Non-Crimp Fabrics are ideal for applications that require a combination of high longitudinal and shear strength and stiffness, and some transverse strength. Ideal for laterally loaded panels with aspect ratio from 1 .5 to ∞. This triaxial product is suitable for hand lay-up, vacuum bagging of relatively flat components (minimum curvature radius approximately 15mm), vacuum injection and other RTM-processes.

LUMAsite® Parchment-SOS has Gentle “Shoji” effect and high transparent white.

Abdullah Al Barrak Plastic Products Polycarbonate Diamond Sheet 2100 x 3000 has an attractive diamond embossed pattern. The sheets are stronger and flexible, providing superior spanning and load-bearing capabilities. Polycarbonate Diamond sheets can also withstand extremes of temperature more readily than other material and with Long life UV protection, they are also more resistant to the long-term effects of weathering. Polycarbonate Diamond Sheets has several characters with high impact resistance, lightweight and can be easily cold bend processed and hot molding can be done. Hence, it can be widely used in construction and decorations. We present to our clients superior quality sheets, manufactured by the well qualified and experienced engineers of by using high-grade raw material and components at our manufacturing unit.

Thermo-Cor™ FR 10.0 phenolic foam is a rigid, semi-closed celled, foam that comes in a full range of densities from 2.0 pcf to 40.0 pcf.Thermo-Cor FR has a higher compression strength ratio than competing phenolic foams of the same density. Its superior structural strength makes it well suited for stand-alone panels and stress skins used either as thermal or acoustical insulation for commercial applications, especially in hospitals, nursing homes and other public places where low smoke and toxicity are important.

Abdullah Al Barrak Plastic Products Polycarbonate Diamond Sheet 1220 x 2440 has an attractive diamond embossed pattern. The sheets are stronger and flexible, providing superior spanning and load-bearing capabilities. Polycarbonate Diamond sheets can also withstand extremes of temperature more readily than other material and with Long life UV protection, they are also more resistant to the long-term effects of weathering. Polycarbonate Diamond Sheets has several characters with high impact resistance, lightweight and can be easily cold bend processed and hot molding can be done. Hence, it can be widely used in construction and decorations. We present to our clients superior quality sheets, manufactured by the well qualified and experienced engineers of by using high-grade raw material and components at our manufacturing unit.

Versitex® VX3 is a cost-effective thermoplastic liner comprised of polypropylene resin reinforced with continuous bi-directional glass fibers to create high impact resistant panels. It resists rot, corrosion, and mildew and is not affected by cleaning related chemicals. Versitex VX Series wall panels provide significant energy absorption over traditional FRP panels and exhibit thermal expansion similar to aluminum. The bi-directional nature of Versitex provides consistent physical properties throughout the entire panel. Versitex is easily repaired by applying low heat.

Thermo-Cor™ FR 5.0 phenolic foam is a rigid, semi-closed celled, foam that comes in a full range of densities from 2.0 pcf to 40.0 pcf.Thermo-Cor FR has a higher compression strength ratio than competing phenolic foams of the same density. Its superior structural strength makes it well suited for stand-alone panels and stress skins used either as thermal or acoustical insulation for commercial applications, especially in hospitals, nursing homes and other public places where low smoke and toxicity are important.

StructureWrap™ V2 200 Epoxy Resin is a two-component 100% solids, moisture-tolerant, highstrength, high modulus epoxy certified by ICC-ES as meeting building code requirements. It wasdeveloped specifically for use as the matrix resin in the StructureWrap™ V2 090 UC, V2 190UC, V2140 UG or the V2 280 UG systems.

LUMAsite® Crystal II is Near-clear product.

APCM DA 409U/S2-glass is a tough, versatile, modified epoxy resin prepreg that cures at 250ºF. The S-2 glass is a Zentron High Strength fiber. Standard weight is 260g/m2 with a 38% resin content. Other weights and resin contents available upon request.

Versitex® VX4 is a cost-effective thermoplastic liner comprised of polypropylene resin reinforced with continuous bi-directional glass fibers to create high impact resistant panels. It resists rot, corrosion, and mildew and is not affected by cleaning related chemicals. Versitex VX Series wall panels provide significant energy absorption over traditional FRP panels and exhibit thermal expansion similar to aluminum. The bi-directional nature of Versitex provides consistent physical properties throughout the entire panel. Versitex is easily repaired by applying low heat.

LUMAsite® Crystal II-SOS is a lightly frosted product.

Tubus Bauer GmbH PC 2,5-110 is a tubus core made with Polycarbonate.

LUMAsite® White 2020 is display white and translucent product.

LUMAsite® Sky-SOS has a pale blue “Shoji” effect.

LUMAsite® Frost-SOS Type FR* has “Silken cobweb” effect and high transparent and fire retardant.

Tubus Bauer GmbH PC 3,5-90 is a tubus core made with Polycarbonate.

LUMAsite® Black 02025 is black and opaque.

Tubus Bauer GmbH PC 7,0-70 is a tubus core made with Polycarbonate.