Products in Decorative Materials & Finishes: Epoxy & Epoxy Derivatives

ALBIDUR® EP 5340 A is a concentrated dispersion, containing 40% high-performance elastomer within a cycloaliphatic epoxy resin (EEC). This product plays a vital role as a toughness modifier, particularly suited for rigid and brittle epoxy resin systems. The elastomeric component consists of a specialized silicone rubber, intricately distributed within the liquid resin as an extremely finely dispersed second phase.

BECKOPOX™ EP 140, a liquid binder and resin in the epoxy and epoxy derivatives family by CASE Ingredients, is recognized for its excellent moisture and solvent resistance. Serving the automotive and transportation, building and construction, industrial, and paints and coatings sectors, it offers good adhesion and low shrinkage. This product finds applications in automotive OEM coatings, marine coatings, and industrial settings like tooling and moldmaking. Compatible with metal substrates, its specialized uses encompass adhesives, trowelling, casting, laminating compounds, and coatings demanding high chemical resistance.

BECKOPOX™ EP 385W/56WA, an epoxy and epoxy derivative binder and resin by CASE Ingredients, boasts VOC-free labeling. This dispersion provides corrosion resistance, improved chemical resistance, and enhanced flexibility. Targeting automotive, building and construction, and paints and coatings sectors, it excels in applications like automotive OEM coatings, marine coatings, and decorative finishes on metal surfaces and laminates.

BECKOPOX™ EP 116 is a non-crystallizing liquid resin, tailored for coatings demanding high chemical resistance, as well as adhesives, trowelling, casting, and laminating compounds. Ideal for epoxy coatings, laminates, and solventless or high-solids coatings on metal surfaces, it offers improved chemical resistance and good abrasion resistance. Versatile applications span exterior and interior use, including wallcoverings, decorative laminates, furniture coatings, industrial coatings, and metal coatings. This resin stands out for its adaptability and durability across a spectrum of demanding applications.

BECKOPOX™ EP 128 is a liquid binder and resin falling within the epoxy and epoxy derivatives category of CASE Ingredients. Noteworthy for its solvent-free and VOC-free attributes, this product excels in automotive and transportation, building and construction, industrial, and paints and coatings sectors. It offers exceptional chemical and moisture resistance, good adhesion, and low shrinkage. Tailored for applications like automotive OEM coatings, marine coatings, and industrial castings, it is compatible with metal substrates and various coating types, including solvent-borne and high-solids coatings.

ADEKA™ EP-4100E, an epoxy resins and compounds variant, is tailored for plastics and elastomers processing through casting techniques. ADEKA™ EP-4100E is primarily intended for end uses in electrical and electronic applications and laminates. This specialized polymer ensures optimal performance in these specific industrial applications.

Arlon 45N is a tough, high Tg (175°C by DSC) multifunctional epoxy laminate and prepreg system designed for use in a variety of higher layer count MLB's. Processeable using conventional FR-4 conditions, 45N is supplied to meet the requirements of IPC-4101/24.

ACP Composites Carbon Fiber Twill Weave Veneers are an outstanding decorative laminate with a deep, glossy, three-dimensional finish ideally used in high-end decorative projects. Manufactured with a clear, resin-rich carbon-fiber prepreg these veneers deliver a smooth, low porosity laminate with a mirror-like finish without the need for a clear coat to enhance the appearance.

Acculam™ Epoxyglas G11 nonFR comprised of heat resistant/halogen free epoxy resin and a woven fiberglass substrate. It qualifies to NEMA G11 and MIL-I-24768/3This material exhibits extremely high mechanical strength at elevated temperatures and has good dielectric loss and electric strength properties under both dry and humid conditions. It is resistant to flow, dimensional change, chemicals and has low moisture absorption.

Northern Industries NI-21 100% Epoxy is an odorless two component coating designed to resist high wear and harsh chemicals when applied to floors and walls. Its high gloss finish and self-leveling characteristic make it excellent for high build applications. When the two components are combined, a conversion from a liquid epoxy to a thermoset solid occurs. The result is a highly durable finish that is easy to clean.

EPOTUF® 37-127 is a low viscosity 100% reactive diluted liquid epoxy resin based on Bisphenol A and which contains EPOTUF® 37-058 (C12 - C14 glycidyl ether).

BC 5010 is a high quality, low viscosity room temperature curing laminating resin. A Safety System for the production of a variety if dimensionally stable fiberglass tools. BC 5010 features low odor and rapid "wet-out" with no vertical drain off. An excellent general purpose laminating resin to meet the tooling requirements for automotive, aircraft, and foundry.

Araldite® GT 6084 is an unmodified solid epoxy resin based on Bisphenol A.

The TE06 Powder coatings are thermosetting paints, which means that when heated, they transform irreversibly into a very hard adherent plastic material with a high index of resistance to most chemical agents, resulting in high-quality coatings in a single layer that can be shiny, satin, matte, textured, granite, transparent, metallic, and so on. Its physical composition is 100 percent dry extract, which can be applied using various electrostatic processes on a variety of supports (metal, glass, ceramics, and so on), followed by a predetermined stuffing.

The TE02 Powder coatings are thermosetting paints, which means that when heated, they transform irreversibly into a very hard adherent plastic material with a high index of resistance to most chemical agents, resulting in high-quality coatings in a single layer that can be shiny, satin, matte, textured, granite, transparent, metallic, and so on. Its physical composition is 100 percent dry extract, which can be applied using various electrostatic processes on a variety of supports (metal, glass, ceramics, and so on), followed by a predetermined stuffing.

45NK is a woven Kevlar® aramid fiber reinforced multifunctional epoxy laminate and prepreg systemengineered to provide in-plane CTE values as low as 6 ppm/°C for compatibility with leadless alumina ceramic chip carriers (LCCC's) and other low expansion SMT devices where control of laminate expansion is critical for solder joint reliability. 45NK exceeds the requirements of IPC 4101/50 (Type AFG).

Ebalta LH 22 / GL is an epoxy laminating resin, which, depending on its application, can be used with the slow GL hardener or the faster GR hardener. They distinguish by minimal physiolgical effects. Regarding dimensional accuracy and –stability, laminates made of ebalta LH 22, even come up to great demands. Due to its long potlife ebalta LH 22/GL is especially suitable for large-area and thick laminates, which also with a thickness of more than 10 mm, applied in one step, cure without any shrinkage at room temperature.

VF 30™ is a low viscosity, high solids epoxy developed as a penetrating concrete primer for polyurea applications. VF 30 penetrates and strengthens the surface of the concrete, reduces pin-hole formations and provides a chemically reactive surface to accept VersaFlex polyurea systems. Adhesion is increased with the use of VF 30 by up to three times that of unprimed concrete.

CamCoat 2191 by Champion Advanced Materials (Singhania Group) is cycloaliphatic epoxy resin. It offers good weather resistance. It is suitable for use in coatings. CamCoat 2191 is used in outdoor applications.

BC 5114 is a gray low viscosity laminating system. This heat resistant resin exhibits excellent wet out, reasonable working time and may be used at room temperature without postcuring. For use above 150°F a post-cure is required. Post cure for applications requiring temperatures above 150°F can be accomplished in an oven or in use by a gradual heat rise; 2hours @ 150°F, plus 2 hours @ 250°F, plus 2 hours at 300°F. BC 5105 can afford consistent use to 300°F if required. Does not contain VCHD or MDA. Typical uses include constructing vacuum form tools, Injection and compression molds, RTM and RIM molds, and matched dies.

Prism Powder Coatings ES-0701-G is a zinc metal containing epoxy primer coating that provides enhanced protection of the substrate from corrosion, provided that the substrate is properly cleaned and pretreated first. As a primer that needs to be top coated, proper cure conditions must be observed in order to maximize inter-coat adhesion without subjecting the coatings to overbake conditions.

Acculam™ Epoxyglas HT-ESD comprised of an epoxy resin binder and a woven glass substrate. Surface properties are Electro Static Dissipative on 1 or 2 sides.Static dissipative properties are embedded in surface layer(s) making this ideally suited as test fixture material for printed circuit boards. Examples: Solder pallets, Assembly fixtures, Automated test equipment, ATE fixtures, and Electronic assembly workstation surfaces.

Westcoat EC-38 Liquid Dazzle® Epoxy ® is a two-component, 100% solids epoxy made with proprietary metallic additives that create an evolving drift dynamic in this unique epoxy. It is a decorative, glossy, durable, mar and chemical-resistant coating. This highly decorative epoxy comes in many metallic colors.

AROFLINT® 303-X-90 is an oxirane-modified ester supplied at 90% solids in xylene. It is used in combination with high acid value polyesters such as AROFLINT® 252-Z1-60, 404-XX-60, D808-XD-71, 809, or 810 at various ratios to yield high performance coatings where excellent appearance and toughness are required.

Razeen® LR 2282 is a general purpose unmodified epoxy resin based on Bisphenol F with medium viscosity.

Epoxy WST is a liquid, transparent, solvent-free two-component epoxy resin with high compressive strength and dimensional stability under heat. It is wellcuring, even in thin layers.

Araldite® GT 7071 N is a low melting solid unmodified epoxy resin based on Bisphenol A. with narrow molecular weight distribution. Araldite® GT 7071 N can be added to alkyd/amino stoving enamels to enhance their quality and to powder coatings e.g. to improve their flow.

Synpol 2800 Epoxy Resin is a solid unmodified epoxy resin based on Bisphenol A and Epichlorohydrine, designed for use in high performance one package baking finishes.

BC 5105 is a clear, unfilled, low viscosity laminating system. This heat resistant resin exhibits excellent wet out, reasonable working time and may be used at room temperature without postcuring. For use above 150°F a post-cure is required. Post cure for applications requiring temperatures above 150°F can be accomplished in an oven or in use by a gradual heat rise; 2hours @ 150°F, plus 2 hours @ 250°F, plus 2 hours at 300°F. BC 5105 can afford consistent use to 300°F if required. Does not contain VCHD or MDA. Typical uses include constructing vacuum form tools, Injection and compression molds, RTM and RIM molds, and matched dies.

CHS-EPOXY 200 V 55 is a Water dispersion of a low molecular weight epoxy resin.

AmCoat Industries Rhinopoxy is a two part, water-borne epoxy. Unlike traditional epoxies, this water based epoxy is eco-friendly, low odor, and easy to apply. RHINOPOXY provides a high-gloss, hard finish that can protect a wide variety of surfaces. RHINOPOXY is tintable and benefits include chemical/solvent resistance and excellent hide.

EPOTUF® 38-692 is a water-dispersible epoxy ester resin for metal primer applications. This resin is supplied at 70% non-volatile in butoxy ethanol and requires neutralization with ammonium hydroxide or amines prior to dispersing in water. This resin exhibits good compatibility with inhibitive pigments. Temperatures during the grind phase should not exceed 140 F.

Super SAP® CPM/CPF is a versatile system designed specifically for the compression molding processes of composite parts. CPM system delivers a high bio-content, excellent fiber wetting qualities, and thixotropic characteristics to limit sag in high-temperature cure applications. A high modulus, combined with excellent elongation properties, enable durable yet lightweight composite parts. CPM is a Super Sap® Formulation.

KemaPox HF 020 is cycloaliphatic diamine-isophorone diamine, a high-performance hardener for liquid, solvent-free epoxy resins, and is used together with other hardener components to formulate with corresponding epoxy-system as a wide range of products.

EPOTUF® 37-151 is a 100% solids, liquid epoxy resin designed for improved flexibility and ultraviolet resistance when compared to standard DGEBA resins. 

Acculam™ Epoxyglas G10/FR4 is a laminate sheet comprised of a flame retardant epoxy resin and a woven fiberglass substrate. This grade qualifies to NEMA FR4 and MIL-I-24768/27.This material has high mechanical strength and excellent electrical insulating qualities in both dry and humid conditions. These attributes along with good fabricating characteristics allow this grade to be used in a wide variety of electrical and mechanical applications.