Products in Decorative Materials & Finishes: Polypropylenes (PP)

Braskem Inspire® 114 EU polypropylene impact copolymer is a propylene based resin very suitable for extrusion applications including blown films, sheets, profiles, pipes and blow molded containers. Inspire® 114 EU Performance Polymer has an excellent balance of high stiffness and impact resistance, even at low temperatures. Inspire® 114 EU Performance Polymer combines outstanding mechanical proper es with superior processability due to its high melt strength delivering improved sag properties compared to conventional polypropylenes.

All Braskem America production facilities are certified to produce bio, bio-circular, and circular polypropylene under the ISCC PLUS certification via the mass balance approach.

For more information regarding REACH, please visit Braskem's site

LNP LUBRICOMP ML004 compound is based on Polypropylene (PP) resin containing 20% PTFE. Added features of this grade include: Wear Resistant.

SABIC's Specialties Business LNP LUBRICOMP MX06404 compound is based on Polypropylene (PP) resin containing 20% glass fiber and 15% PTFE. Added features of this grade include: Heat Stabilized, Low Extractable, Wear Resistant.

LNP LUBRICOMP ML008 compound is based on Polypropylene (PP) resin containing 40% PTFE. Added features of this grade include: Internally Lubricated, Wear Resistant.

SABIC's Specialties Business LNP LUBRICOMP MFL36S compound is based on Polypropylene (PP) resin containing 30% glass fiber, 15% PTFE. Added features of this grade include: Heat Stabilized, Wear Resistant.

LNP LUBRICOMP ML004S compound is based on Polypropylene (PP) resin containing 20% PTFE. Added features of this grade include: Wear Resistant, Heat Stabilized.

LNP LUBRICOMP ML003S compound is based on Polypropylene (PP) resin containing 15% PTFE. Added features of this grade include: Heat Stabilized, Wear Resistant.

SABIC's Specialties Business LNP LUBRICOMP ML004LS compound is based on Polypropylene (PP) resin containing 20% PTFE. Added features of this grade include: Wear Resistant, Heat Stabilized, Low Extractable.

LNP LUBRICOMP MG004 compound is based on Polypropylene (PP) resin containing graphite powder. Added features of this grade include: Wear Resistant.

PropylTex 230S-3034 are Medium particle size grades of micronized polypropylene for adding consistent texture and structure to a wide variety of paints and coatings.Features and Benefits Provides gloss reduction with improved burnish resistance vs. silica Adds a medium texture effect to the coating surface Tough, high molecular weight polypropylene gives good durability Does not Iower COF; ideal for non-skid surfaces Narrow cut mean particle size grades available for maximum texture control Adds texture in low bake (Low E) powder coatings

PropylTex 230S-3639 are Medium particle size grades of micronized polypropylene for adding consistent texture and structure to a wide variety of paints and coatings.Features and Benefits Provides gloss reduction with improved burnish resistance vs. silica Adds a medium texture effect to the coating surface Tough, high molecular weight polypropylene gives good durability Does not Iower COF; ideal for non-skid surfaces Narrow cut mean particle size grades available for maximum texture control Adds texture in low bake (Low E) powder coatings

Tasnee PP H1030 is a Polypropylene Homopolymer with a Melt Flow Rate (MFR) of 3 g/10min. Tasnee PP H1030 is designed for stretch tape from water bath and chill roll, offering low water-carry-over and low shrinkage. Its good mechanical properties and compliance to food contact regulations allow it to be used in various applications.

Tasnee PP H2045 is a Polypropylene Homopolymer with a Melt Flow Rate (MFR) of 4.50 g/10min. Tasnee PP H2045 is a medium molecular weight distribution grade with anti-gas fading stabilization system. It exhibits very good spinning performance and excellent mechanical properties.

Tasnee PP H2350 is a Polypropylene Homopolymer with a Melt Flow Rate (MFR) of 35.0 g/10min. Tasnee PP H2350 is a very narrow molecular weight distribution homopolymers, suitable for the extrusion of fine fibers with the spunbond technology for non-woven applications. It is also suitable for continuous filament (CF) yarns.

Tasnee PP H1045 is a Polypropylene Homopolymer with a Melt Flow Rate (MFR) of 4.5 g/10min. Tasnee PP H1045 is designed for high extrusion speed lines to make stretch tapes, offering low water-carry-over and low shrinkage. Good balance of strength, shrinkage, splitting tendency. It is compliant to food contact regulations.

Tasnee PP H2250 is a Polypropylene Homopolymer with a Melt Flow Rate (MFR) of 25 g/10min. Tasnee PP H2250 is a medium narrow molecular weight distribution with anti-gas fading stabilization. It is intended for the extrusion of fine fibers with the spunbond technology for non-woven applications. It is also suitable for the extrusion of bulk continuous filament (BCF) for carpet pile and continuous filament (CF) yarns.

Tasnee PP H2245 is a Polypropylene Homopolymer with a Melt Flow Rate (MFR) of 24.5 g/10min. Tasnee PP H2245 is a medium molecular weight distribution with anti-gas fading stabilization system. It has excellent gloss and chining properties.

Characteristics: Controlled rheology polypropylene homopolymer, medium molecular weight distribution, with high fluidity, with special additives for use on thin coatings at high line speeds to obtain excellent uniformity and adhesion, low neck-in, and thinning (draw-drown) and good properties. Recommended for: Extrusion coating of raffia, paper and other substrates, aluminum and paper laminating.

Neoplast™ 155 M/E are strong, flexible materials providing excellent sealing, esthetics, long term performance compared to thermoset rubbers and PVCs.

RG 1102 J is a Polypropylene Homopolymer With Narrow MFR Range and High Processing Stability. It is used in General Thermoforming, Diary Products, Desserts, Tapes, Carpet Backing

PETOPLEN EH341 is a homopolymer polypropylene resin with narrow molecular weight distribution. The material is produced by controlled rheology (CR) technology. It is suitable for very high speed spunbond fiber production and general purpose injection molding.

RE20WL is a polypropylene random copolymer for production of woven cloth & BOPP lamination.This grade uses Unipol® polypropylene technology with latest catalyst technology.

IFG rPP fibers show a further step forward and commitment towards our drive to increase sustainability. IFG rPP consists of virgin PP combined with mechanically recycled PP (5 - 50%) and is available in raw white, gray or black.

Neoplast™ 163 FT EB are strong, flexible materials providing excellent sealing, esthetics, long term performance compared to thermoset rubbers and PVCs.

Neoplast™ 180 HOFR are strong, flexible materials providing excellent sealing, esthetics, long term performance compared to thermoset rubbers and PVCs.

COPYLENE® CH020-01 is a polypropylene homopolymer resin designed for BOPP (biaxially oriented polypropylene) film extrusion applications. It is made with a non-phthalate catalyst.

RG 3225 MC is a Polypropylene Random Copolymer With High Transparency and Good Weld Strength. It is used in Cast Films (High Slip & Antiblock), Laminating and Packaging Films

Neoplast™ 173 M/E are strong, flexible materials providing excellent sealing, esthetics, long term performance compared to thermoset rubbers and PVCs.

Neoplast™ 173 FT EB are strong, flexible materials providing excellent sealing, esthetics, long term performance compared to thermoset rubbers and PVCs.

PLANOPROP® PP 0515 SP can be used for a variety of industrial applications (both injection molding and extrusion) which is complied with ISO and DIN standards.

Neoplast™ 145 FT EB are strong, flexible materials providing excellent sealing, esthetics, long term performance compared to thermoset rubbers and PVCs.

PETOPLEN EH251 is a homopolymer polypropylene resin with narrow molecular weight distribution. The material is produced by controlled rheology (CR) technology. It is suitable for high speed injection molding and general purpose fiber extrusion applications.

3.5 MELT FLOW HOMOPOLYMER FOR STRETCHED TAPE APPLICATIONS Pinnacle Polymers Polypropylene 1703 is made via UNIPOL™ PP technology, which utilizes gas-phase fluidized bed reactors with a high activity catalyst system to ensure uniform physical properties and lot-to-lot consistency.This product is intended for woven products used for carpet backing, sacking, industrial and geotextile fabrics.The 1703 product provides: Excellent color and processing stability Resistance to gas fading Low water carry-over Excellent lot-to-lot consistency Pinnacle's polypropylene, as marketed by Pinnacle Polymers, in natural, uncolored pellet form complies with appropriate requirements of CFR Title 21, Part 177, Subpart B, Section 177.1520 (c) 1.1a entitled "Olefin Polymers" of the Food Additives Amendment of 1958 to the United States Food, Drug and Cosmetic Act of 1938.

Sortology PP Fiber Mixture is a washed and purified high melt blend of PP Homopolymer. The PP Fiber is sourced from post-consumer carpet which has undergone a four stage process of optical sorting, size reduction, washing and super-purification to remove the SBR layer and other polymers.

Neoplast™ 155 FT EB are strong, flexible materials providing excellent sealing, esthetics, long term performance compared to thermoset rubbers and PVCs.