Products in Decorative Materials & Finishes: Heat Resistance

Iron oxide is the main pigment used in Polyester 701.

Acculam™ Epoxyglas G11 nonFR comprised of heat resistant/halogen free epoxy resin and a woven fiberglass substrate. It qualifies to NEMA G11 and MIL-I-24768/3This material exhibits extremely high mechanical strength at elevated temperatures and has good dielectric loss and electric strength properties under both dry and humid conditions. It is resistant to flow, dimensional change, chemicals and has low moisture absorption.

Phthalocyanine is the main pigment used in Nylon 501.

ASTAMITE MU7 is a Melamine Urea Formaldehyde Powder Resin. The ASTAMITE Line offers thermosetting powder resins for use in a variety of industries. In it's cured state, the resin is a cross-linked, insoluble, and infusible material.

Acculam™ Epoxyglas G11/FR5 comprised of flame retardant/heat resistant epoxy resin and a woven fiberglass substrate. It qualifies to NEMA FR5 and MIL-I-24678/28.This material exhibits extremely high mechanical strength at elevated temperatures. It shows good dielectric loss and electric strength properties under both dry and humid conditions. It has good chemical resistance and low moisture absorption.

Metal-containing azo is the main pigment used in Nylon 105.

Carbon black is the main pigment used in Polyester 901.

Shenzhen Xinghua Pigment Masterbatch Solvent Green 28 is green colored anthraquinone dye. This grade offers high heat resistance, very good migration fastness and excellent light fastness. Solvent Green 28 is designed for use in PS, SAN, hard PVC, AS, ABS, PMMA, PET, PC and PBT. It can be used in PA6 and PA66.

Phthalocyanine is the main pigment used in Polyester 601.

Calcined metal complex is main pigment used in Polyester 103.

BC 5114 is a gray low viscosity laminating system. This heat resistant resin exhibits excellent wet out, reasonable working time and may be used at room temperature without postcuring. For use above 150°F a post-cure is required. Post cure for applications requiring temperatures above 150°F can be accomplished in an oven or in use by a gradual heat rise; 2hours @ 150°F, plus 2 hours @ 250°F, plus 2 hours at 300°F. BC 5105 can afford consistent use to 300°F if required. Does not contain VCHD or MDA. Typical uses include constructing vacuum form tools, Injection and compression molds, RTM and RIM molds, and matched dies.

Titanium oxide is the main pigment used in Nylon 801.

Prime Polymers Ultzex™ 3520L is a Linear Low Density Polyethylene product. It can be processed by film extrusion and is available in Asia Pacific, Europe, or North America. Applications of Ultzex™ 3520L include coating applications and film.Characteristics include: Good Sealability Good Stiffness Heat Resistant

Shijiazhuang Leayoo Chemicals Anti-static DM-1004 is a light gray color powder pigment with fine particles. It is often used for ESD epoxy flooring system coating, or the conductive primer on the plastic compound and steel board.

ASTAMITE MF600 is a Melamine Formaldehyde Powder Resin. The ASTAMITE Line offers thermosetting powder resins for use in a variety of industries. In it's cured state, the resin is a cross-linked, insoluble, and infusible material.

Iron oxide is the main pigment used in Nylon 703.

Ultramarine is the main pigment used in Polyester 504.

Azomethine is the main pigment used in Polyester 405.

Shenzhen Xinghua Pigment Masterbatch Solvent Blue 78 is blue colored anthraquinone dye by Shenzhen Xinghua Pigment Masterbatch. It provides excellent light fastness, high heat resistance and very good migration fastness. This grade is recommended for use in PS, SAN, hard PVC, AS, ABS, PMMA, PET, PBT, PC and PA 6. Solvent Blue 78 can be used in PA 66.

Shenzhen Xinghua Pigment Masterbatch Solvent Blue 35 is blue colored anthraquinone dye by Shenzhen Xinghua Pigment Masterbatch. It offers very good light fastness, high heat resistance and very good migration fastness. Solvent Blue 35 is designed for use in PS, SAN, hard PVC, AS, ABS, PMMA and PET. It can be used in PBT, PC, PA 6 and PA 66.

Phthalocyanine is the main pigment used in Nylon 601.

Shandong Donglin New Materials CPE (Chlorinated Polyethylene) 135A is a high molecular polymer with linear structure generated by the reaction of HDPE and chlorine. It itself is a special thermoplastic elastomer. It has the following excellent chemical properties: good weather resistance, flame retardancy, It is resistant to chemicals and ozone. Its basic function is to improve the impact strength and weather resistance of PVC products. Donglin CPE 135A has excellent elongation at break and the best tensile strength. Compared with other CPE products, our CPE has higher impact strength.

Dioxazine is the main pigment used in Nylon 407.

BC 5105 is a clear, unfilled, low viscosity laminating system. This heat resistant resin exhibits excellent wet out, reasonable working time and may be used at room temperature without postcuring. For use above 150°F a post-cure is required. Post cure for applications requiring temperatures above 150°F can be accomplished in an oven or in use by a gradual heat rise; 2hours @ 150°F, plus 2 hours @ 250°F, plus 2 hours at 300°F. BC 5105 can afford consistent use to 300°F if required. Does not contain VCHD or MDA. Typical uses include constructing vacuum form tools, Injection and compression molds, RTM and RIM molds, and matched dies.

Titanium oxide is the main pigment used in Polyester 802.

Benetex OB-1 (1533-45-5)is a heat resistant and chemically stable fluorescent whitener that increases whiteness and provides brighter looking colors. It is used to offset the yellowness of a polymer and to yield a whiter appearance. Optical brighteners create brilliance by a fluorescence process involving absorption of invisible UV light and emission of visible blue light. Benetex OB-1 is especially useful in polyester and nylon fibers, as well as in high temperature engineering plastics.

Anthraquinone is the main pigment used in Polyester 101.

Iron oxide is the main pigment used in Polyester 702.

Carbon black is the main pigment used in Nylon 901.

Calcined metal complex is the main pigment used in Polyester 102.

Shenzhen Xinghua Pigment Masterbatch Solvent Blue 36 is blue colored anthraquinone dye by Shenzhen Xinghua Pigment Masterbatch. It offers very good light fastness, high heat resistance and very good migration fastness. It is recommended for use in PS, SAN, hard PVC, AS, ABS, PMMA and PET. Solvent Blue 36 can be used in PBT, PC, PA 6 and PA 66.

Calcined metal complex is the main pigment used in Nylon 103.

Perylene is the main pigment used in Nylon 304.

Calcined metal complex is the main pigment used in Nylon 102.

Sekisui Plastics ST-FOAMAC HR is the heat-resistant grade offering the heat distortion temperature of 170℃.

Perinone is the main pigment used in Polyester 301.