Products in Flooring & Surfaces: Low Odor

Continental Research Corporation CG-EFP Floor Finish is made with a unique polymer technology that delivers a “wet look” shine initially; then when buffed at any speed, it offers high durability and increased gloss retention. The non-zinc, self-crosslinking chemistry is responsible for its excellent detergent resistance, low odor, and rapid cure.

Res-Tek EPO-Guard™ EPO-205 Top Coat is a low odor, 100% solids, 2-component, viscous, epoxy coating. This product may be clear or pigmented and has an orange peel texture. This product is designed for use in vertical applications or as an optional topcoat for decorative quartz and flake flooring systems.

Arboritec™ First Coat Ceramic Fortified Waterborne Primer is an 1-component waterborne ceramic fortified primer for indoor wood and parquet floors. The finish is fortified with ceramics thanks to our unique Small Particles Technology. Adding ceramic particles results 30% less petro- chemical raw materials used hence makes First Coat up to 30% more environmentally friendly than competitive brand primers. First Coat is NMP free and has low solvent content. First Coat dries fast, reduces the side bonding effect and the fiber rising. By adding ceramic particles, our waterborne primers dry hard and become very easy to sand. It gives the floor a smooth, rich and enhanced surface. It is the perfect foundation for our waterborne finishes. For indoor use only.

Westcoat EC-32 High Build Clear Epoxy Topcoat is a two-component, 100% solids, high-build, high viscosity, cyclo-aliphatic, chemical resistant epoxy. This highly versatile epoxy coating has superior clarity.

Protective Industrial Polymers PIP 1000 Thixo FS is a two-or three component, 100% solids, low odor, epoxy resin coating system. PIP 1000 Thixo is primarily designed to grout PIP epoxy mortar systems. PIP 1000 Thixo exhibits a higher degree of body and thixotropy when compared with PIP 1000 Grout or PIP 1000 Gel. PIP 1000 Thixo may also be used as the binder in combination with decorative quartz and silica sand aggregate for vertical cove applications. PIP 1000 Thixo may be used in combination with 1000ST-B hardener for fine crack filling, or skim coat patching needs. PIP 1000 Thixo is supplied with a choice of curing agents to achieve specific cure rates, chemical resistance requirements, utility and final esthetics.

Carbo Vitrobond® Mortar is a 100% carbon filled, plasticized, hot-pour, sulfur based mortar. It is easily melted, does not settle out in the pot, has very little odor, pours smoothly and freely and is dense and strong. The principle use of Carbo Vitrobond® Mortar is for corrosive conditions involving hydrofluoric acid or fluoride salts. It has the same chemical resistance as VITROBOND as well as fluoride resistance. Carbo Vitrobond® Mortar can be used as a bonding agent for acid resistant brick in lining reaction vessels, storage tanks, towers, trenches, sumps, processing tanks and equipment, pickling tanks for stainless steel and waste treatment tanks. It is also used in the installation of corrosion resistant industrial floors. CARBO-VITROBOND may be used in a variety of special applications.

GEKKO® GP is an multipurose contact adhesive suitable for use with a variety of substrates.

DURACLAD ECS C-307 is a tile adhesive.

Coating & Binding Technology DC 1200 is a clear, 100% solids, two component epoxy resin coating system, specifically formulated as a clear topcoat over pigmented or decorative flooring systems. It is formulated with clear transparent resins and hardeners, rendering a coating which highlights the flooring beneath it. This product produces a gloss finish. Pigment can be added for a superior UV receiving coat for colored flakes or aggregate.

Helmicol 3029 is a two-component solvent-free, polyurethane adhesive formulated to permanently install luxury vinyl tile and plank flooring, resilient sheet vinyl flooring, rubber tile flooring and rubber sheet flooring and rubber and vinyl stair treads. Helmicol 3029 has been formulated to produce a superior, flexible bond required for use in high traffic applications. May be used over properly prepared porous and non-porous surfaces such as concrete, underlayment grade plywood, cementitious based patching compounds and levelers.

Acrylic 57-1™ is recommended for floors, cabinets and trim, and metal and plastic elements. As it has a very low odor and low VOC’s, it is an excellent choice for coating floors and other surfaces in enclosed areas such as basements, hospitals, schools and restaurants, This product has a non-yellowing high-gloss finish with exceptional mar resistance. Although it works well on its own, it also makes an excellent choice as a topcoat for other coatings.

Aiflooring TC BaseCoat is designed to be used as the basecoat of the TerraChip System. It is supplied pigmented and is self priming. Scrape times for TC Basecoat can be adjusted by using one, or a blend, of the 3 BaseCoat hardeners- Standard, Redline, and Infrared. TC BaseCoat is a two component 100% solids epoxy.

SPARTACOTE® Vertical HB is a multi-functional, pigmented high build novolac epoxy coating, for interior wall and ceiling applications. Its available in a white gloss finish.

STONETECH® Quartz & Porcelain Tile Sealer is a water-based sealer, designed to protect quartz, engineered stone and tile from stains and the continuous growth of stain and odor causing bacteria, mold and mildew. It preserves the original look of the surface, is effective in interior and exterior applications and can be used as a pre-grout sealer.

HELMIBOND 6520 is a solvent-free, acrylic, pressure sensitive adhesive formulated to permanently install resilient floor tile including luxury vinyl tile and plank and resilient sheet flooring. To insure product stability and reduce joint openings, HELMIBOND 6520 has been formulated to produce a firm bond line less susceptible to indentation and telegraphing. May be used over properly prepared porous and non-porous surfaces such as concrete, underlayment grade plywood, cementitious based patching compounds and levelers.

STONETECH® BulletProof® Sealer is a water-based penetrating sealer that provides maximum stain and antimicrobial product protection while preserving the natural look of the surface. This premium sealer offers the best protection on the most porous natural stone, tile, masonry and grout surfaces in interior and exterior applications. Built with Microban® antimicrobial protection, STONETECH BulletProof Sealer continuously inhibits the growth of stain and odor causing bacteria, mold and mildew on surfaces. A safer professional grade alternative to high VOC solvent-based sealers that is better for you and the environment and comes with a lifetime product satisfaction guarantee.

Helmicol 3035 is a two-component, fast reacting, solvent-free, polyurethane adhesive formulated to permanently install luxury vinyl tile and plank flooring, resilient sheet vinyl flooring, rubber tile flooring and rubber sheet flooring and rubber and vinyl stair treads. Helmicol 3035 has been formulated to produce a superior, flexible bond required for use in high traffic applications. May be used over properly prepared porous and non-porous surfaces such as concrete, underlayment grade plywood, cementitious based patching compounds and levelers.

DriTac Flooring Products 7900 Super Grab is a single-component, moisture control urethane wood flooring adhesive developed for installing long and wide plank hardwood flooring.