Products in Flooring & Surfaces: Water Resistant

Akfix 812 Professional PU Gun Foam (-12°C) is a single-component PU foam used with an applicator gun and developed for applications in temperatures down to -12°C. It does not contain any propellant gasses which are harmful to the ozone layer.

ChemMasters’ Traz 25-A is a high solids, Low Volatile Organic Compound (V.O.C.) high performance concrete sealing compound for decorative concrete such as stamped and exposed aggregate. Traz 25-A is formulated with methyl methacrylate polymers that develop high gloss and are more chemically resistant than standard acrylic sealers. Traz 25- A’s film will not yellow under any UV conditions and is extremely durable.

CIPADAM® S-100 is a clear, penetrating, breathable sealer that contains a 100 percent solution of Silane in a solvent carrier. CIPADAM® S-100 chemically reacts with the concrete substrate to produce a long lasting water repellent effect. This material's small molecular structure allows for maximum penetration into any silicous material material to form an alkali resistant polysiloxane.

POLYSHIELD HT™ TRAFFIC COAT is a state-of-the-art, high-performance, spray-applied, plural-component, purepolyurea elastomer. This system is based on amine-terminated polyether resins, amine chain extenders, and MDIprepolymers. It provides a flexible, resilient, tough, monolithic membrane with water and chemical resistance. Witha 1 minute 30 second tack time, it is excellent for projects that require a broadcast aggregate and/or require a smoothsurface.

Akfix 872 Mega PU Gun Foam 70L is a single-component PU foam used with an applicator gun and features significantly volumes, easier application and reusability. It does not contain any propellant gasses which are harmful to the ozone layer.

Polygem 1325 Brushable Ceramic Epoxy Coating is a brushable epoxy coating specially blended with abrasion resistant ceramic fillers to provide a durable barrier to protect surfaces subjected to wear and abrasion. Polygem 1325 is easy and apply by brush to most surfaces. Polygem 1325 is waterproof and resistant to most chemicals and solvents. Polygem 1325 is a thick and creamy epoxy coating will allow for vertical and overhead application.

Koster LF-VL is a solvent free, decorative floor covering with high abrasion resistance which can be applied on screed or cement based floors.

Firestop 3600EX is Fire and Smoke Stop Intumescent Sealant. 3600EX is a one-component highly intumescent firestop sealant based on PFP Partners’ environmentally friendly chemistry. 3600EX is a latex-based product designed and tested to firestop through-penetrations, voids and construction joints. 3600EX is virtually odorless also provides a flexible seal which is non-reactive with most substrates.

Krystal 25 Emulsion EF is a state of the art, water emulsion of 100% pure methyl methacrylate acrylic polymers. This high quality polymer produces a VOC compliant compound for curing freshly placed concrete. This product provides a quality cure and seal while assuring total resistance to yellowing from ultraviolet exposure. It is particularly suited for concrete where VOC requirements or safety concerns make solvent based systems inappropriate In addition, this product is unique in that it has built in freeze/thaw protection. While it will solidify if frozen, after thawing and gentle stirring, it will be as good as new.

UREA-TUFF 4260 is a two-component, liquid-applied hybrid polyurea elastomer designed for use as a mix-in-the-bucket, but yet rapid-curing, monolithic waterproofing membrane. is a solvent-free aromatic polyurea-polyurethane elastomer containing no tar or asphaltic extenders.

A low viscosity, two component polyamide modified epoxy primer/sealer formulated with unique wetting agents to provide maximum penetration into concrete surfaces. PC-149 seals concrete surfaces from penetration of water and chemicals which cause concrete deterioration and spalling. Ideal for both new and old concrete surfaces for exterior or interior exposures. PC-149 is also used as a primer for epoxy and polyurethane top coats.

Diamond Tapes™ Anti-Slip Tape offers extra safety for floors that tend to be slippery. This tape consists of a black colored vinyl (PVC) backing with a rough grainy surface on top, coated with a strong solvent acrylic adhesive on the other side. This tape is backed by a white-colored easy release paper liner.

Akfix 3XL High Expansion PU Gun Foam is a single-component PU foam used with an applicator gun and features higher yield, easier application and reusability. It does not contain any propellant gasses which are harmful to the ozone layer.

Barvy A Laky Lazurol Outdoor Market Paint S1020 is a synthetic transparent varnish. It is a solution of polyurethane-modified alkyd resin in an aroma-free solvent with the addition of matting agents, waxes, driers and additives.

Abocoat 8508-1 excels as a protective and decorative coating for concrete, metal, wood and composite surfaces, indoors and outdoors. It is applied to floors, walls, machinery and installations in industrial, marine, and architectural environments. It is an excellent base coat for polyurethane and other coatings.

HELMIBOND 867 is a solvent-free, acrylic adhesive formulated to permanently install luxury vinyl tile and plank flooring, resilient sheet vinyl flooring, rubber tile flooring and rubber sheet flooring and rubber and vinyl stair treads. To insure product stability and reduce joint openings, HELMIBOND 867 has been formulated to produce a hard set and firm bond line less susceptible to indentation and telegraphing. May be used over properly prepared porous and non-porous surfaces such as concrete, underlayment grade plywood, cementitious based patching compounds and levelers.

Ktisopur UV is an aliphatic polyurethane coating suitable for protecting floor surfaces in outdoor areas. It's elastic properties make it an ideal solution for waterproofing and crack bridging. A Floor Coating that does not get damaged by the sunlight.

Dual Purpose™ is Non-Sag Formula, Excellent Open Time, Easy Clean Up, Exceeds ANSI A136.1 Type I & II Standards, Adhesive for Interior Installation of Ceramic Tile on Walls and Floors is high performance Type 1 ceramic tile adhesive for interior installation of all types of vitreous and non-vitreous ceramic wall and floor tile. Dual Purpose exceeds ANSI 136.1 Type 1 requirements for areas requiring “Prolonged Water Resistance”.

Eclectic E6000 Industrial Adhesive (Clear) is a unique SELF-LEVELING, non-flammable industrial adhesive formulated to meet high-performance requirements. It permanently adheres to more surfaces than virtually any other adhesive, providing exceptional adhesion to wood, metal, glass, fiberglass, ceramics, masonry, concrete, asphalt, leather, rubber, PVC, neoprene, vinyl and many plastics. E6000 maintains its flexible bond in extreme cold temperatures, will not crack or become brittle and is excellent for bonding items subject to vibration. For applications that are exposed to direct sunlight, paint over E6000 after curing or use E6800 UV formula.

Crystal Clear is a state of the art proprietary formulation which creates the highest gloss possible on concrete. This premium quality, super high gloss, non yellowing, curing and sealing compound coats concrete with a chemically bonded siliconized acrylic film that deepens the color and enhances the look of pigmented or decorative concrete. Crystal Clear completely resists discoloration from ultraviolet light exposure and keeps its high gloss finish much longer than standard concrete sealers. Crystal Clear will retard efflorescence while resisting oil, grease and food stains. Crystal Clear eliminates concrete dusting, while protecting concrete against salt and water penetration.

POLYSHIELD HT™ SLOW FC is a state-of-the-art, high- performance, sprayed, plural-component, pure polyurea elastomer,that is compliant with FDA 21 CFR 175 300 (c)/ (d) high temperature, heat-sterilized, non-acid aqueous food contact.This system is based on amine-terminated polyether resins, amine chain extenders and prepolymers. It provides aflexible, tough, resilient monolithic membrane with water and chemical resistance.

Abocoat 8006-3 provides heavy-duty protection on concrete, wood, and metal surfaces, preventing corrosion and wear. High gloss. Great versatility, superior adhesion, flexibility, hardness, and water, salt and chemical resistance. Inhibits rust. It is frequently specified for laboratories, commercial kitchens, hospitals, and industrial flooring. Add sand or ColorGrit™ to add slip-resistance.

Weatherskin Coatings WSM4 Metal Roof is an easy-to-use, liquid-applied, waterproofing material specially designed to protect metal roof surfaces. WS M4 becomes an integral piece of a substrate. It bonds well and increases durability and protection for any metal surfaces. It has a unique molecular structure, that allows for substrate movement, and accommodation for sudden temperature fluctuation, is able to perfectly utilize its tensile strength and elongation abilities and allow the substrate to breathe, preventing damage from moisture and air born pollutants, including fungi, mold, and bacteria. All application is by experienced, independent certified applicators.

Akfix 805 Multi Purpose PU Foam is a single-component, moisture-curing and self-expanding aerosol polyurethane foam. It is designed for easy dispensing through the straw adapter included with each can. It does not contain any propellant gasses that are harmful to the ozone layer.

Trimafloor 94 is a high quality epoxy ester, single pack, gloss floor paint.

Firestop 4800DW is Fire and Smoke Stop Sealant. 4800DW is a one-component endothermic firestop sealant based on our environmentally friendly chemistry. 4800DW is a latex-based product designed and tested predominately for firestopping through-penetrations and construction joints. 4800DW is virtually odorless and also provides a flexible seal which is non-reactive with most substrates.

Kish Industries Hybluild Floor Coating is an epoxy-amine high build system with excellent hardness, good gloss, and good chemical, water, and impact resistance which has high gloss finish.

Morgan Adhesives Powerflex Gray is a cementitious one pack, flexible, fast setting, rubber based tile adhesive. Powerflex, when cured, exhibits water resistance, high bond strength & superior flexibility. Powerflex installations can usually be grouted after only 3 hours.

PyroCide™ Clear is a two component thin film intumescent coating formulated for existing and new wood structures where the appearance of the wood is important. PyroCide™ Clear will not bubble, haze or crack. It has enough water resistance for interior applications to allow the coating to have an occasional wipe with a damp cloth and maintain its finish.An intumescent coating is a proprietary formulated blend of compounds which, at ambient temperatures, remain perfectly stable and nonreactive. When the temperature increases, its components undergo a chemical reaction and produce an extended char. This carbonaceous char has a volume many times that of the original thin coating and its low thermal conductivity provides insulation and protects the substrate from the effects of fire propagation.

BAI YUN® RTV Neutral Silicone Sealant 300ml Caulk For Windows And Doors SS550 Neutral Silicone Sealant is one-component, neutral curing, general purpose construction silicone sealant with good adhesion to glass, aluminum, cement, concrete etc., specially designed for sealing in all type door ,window and wall joints.

Butyl-Tite™ Joint Sealant is an extruded tacky rubber sealant in rope form for use on manholes, storm sewer pipe, elliptical and other special shapes or concrete and metal surfaces. It is a permanently flexible non-shrinking compound and has extreme water and corrosion resistance. Excellent adhesion and ductility provide adherence to practically any clean dry surface when pressured into place.

Cactus Industrial PMMA-Based Waterproofing Coating is a solvent-free, rapid-curing and highly flexible liquid-applied membrane system. It delivers durable emergency surface repair and long life cycle waterproofing and corrosion protection. The waterproofing system is applied together with a tough fleece reinforcement to increase membrane strength. It is a solvent-free, 2-component, fast curing and highly flexible methacrylate waterproofing resin system.

FIBRANxps 400-L is a rigid water-resistant insulation board made from extruded polystyrene with smooth surface on both faces.

DK 500™ 100% Solids Epoxy Clear Coat is a 2 component 100% solids, zero VOC floor coating system that is used in a wide variety of applications such as, thick-build clear coat for a host of decorative concrete systems, Dura-Kote Flake, Dura-Kote Metallic systems, and in certain applications as a primer coat and/or binder coat.

BAI YUN® BAIYUN Caulk Ceiling Wall Joint Class 20 Window And Door Silicone Sealant SS804 Silicone Joint Sealant is a one-component, neutral curing, general-purpose construction silicone sealant with good adhesion to glass, aluminum, cement, concrete etc., specially designed for sealing in all type of doors, windows, and wall joints.