Products in Floor Coatings: Urethanes

Laromer® UA 19 T is a liquid product distinguished by its radiation curability and abrasion resistance features. Tailored for applications in the paints and coatings industry, especially in building and construction, it proves ideal for floor coatings, wood coatings, and finishes.

Laromer® UA 9050 is a product recognized for its features of radiation curability and abrasion resistance. Tailored for the paints and coatings industry, particularly in building and construction, it excels in floor coatings, wood coatings, and finishes.

Laromer® UA 9072 is a liquid product with notable features, including radiation curability and abrasion resistance. Ideal for applications in the paints and coatings industry, it is well-suited for building and construction, specifically in floor coatings, wood coatings, and finishes.

Laromer® UA 9033, featuring radiation curability and abrasion resistance, is a reliable product for the paints and coatings industry. Primarily used in building and construction applications, it excels in floor coatings, wood coatings, and finishes.

Laromer® UA 9089 is a liquid product with distinctive features, including radiation curability and abrasion resistance. Tailored for the paints and coatings industry, especially in building and construction, it is well-suited for floor coatings, wood coatings, and finishes.

Staticide® ACL 10R Primer is a clear, penetrating, non-toxic primer that provides long-lasting protection against damage associated with water penetration for a variety of horizontal and vertical surfaces, particularly unsealed concrete. This ready-to-use product can be utilized in the preparation of 4700SS Staticide® Diamond Paint. Outstanding water repellency Environmentally safe and 100% vapor permeable

Coating & Binding Technology PC 4500 is a two-component Polyaspartic urethane coating system that exhibits fast cure time, high solids, low-viscosity, high strength, UV resistant, reduced odor, and no VOC. PC 4500 has an extended working time and usable pot-life especially in elevated temperatures and humid conditions.

Polygem 738 UV Stable Gloss Water Based Urethane is a water based UV stable paint. This product is available in 10 lbs packaging with approximate 14 x 7 x 8 inches dimension. Polygem 738 gives a glossy finish.

SU 5020is a hexa-functional aliphatic urethane acrylate oligomer with 26% butyl acetate developed for UV/EB cure coating applications requiring excellent adhesion on difficult substrate, extreme fast cure response and non-yellowing properties.

Abothane 8003-3™ Protects wood, concrete, and seamless floors anywhere a clear, tough coating is required. High gloss. Abothane 8003-3 is designed for high flexibility and abrasion, chemical, and corrosion resistance with high wear and slip resistant properties. Practically colorless, it looks great on most floors. Requires no waxing. Perfect consistency for sealing porous surfaces.

Polygem 739 UV Stable Gloss Water Based Urethane is a water based UV stable paint. This product is available in 10 lbs packaging with approximate 14 x 7 x 8 inches dimension. Polygem 739 gives a matte finish.

SU 5260 is a tri-functional aliphatic urethane acrylate oligomer developed for UV/EB cure coating applications requiring good abrasion resistance, good toughness, good stain resistance and non-yellowing properties.

Perdure FE80 is an ultra-high solid, flexible urethane-modified epoxy used as a crack isolation membrane for interior use under various Duraamen Resinous Flooring Systems. It resists cracking caused by horizontal substrate movement, providing a crack-resistant, resilient, sound-absorbent, waterproof, durable floor.

Chemtek Products CF-320 POLY-GLOSS is a high solids oil modified urethane sealer which is a ready too use sealer that offer a tough durable finish that protects concrete and resists many industrial and is unsurpassed for resistance to rubber burns from lift truck traffic.

ZAR® Interior Oil Modified Urethane Sanding Sealer is a super-fast drying first coat for wood. Specially formulated to seal wood surfaces with itsself-leveling, easy flow properties. Exotic hardwood approved. Use on wood speciessuch as Teak, Brazilian Walnut, and Brazilian Cherry.

Rust Bullet® DuraGrade™ Concrete is a high-performance concrete coating that can be applied directly onto concrete surfaces without any acid etching. Rust Bullet® DuraGrade™ Concrete is a single component urethane resistant to UV rays, acid splash and chemical solvents. It is ideal for any indoor or outdoor concrete surface. Due to its UV resistance and adhesion properties, Rust Bullet® DuraGrade™ Concrete requires no topcoat or base/primer coat. Apply by brush, roller, or spray equipment. VOC compliant in all 50 states.

Rust Bullet® DuraGrade™ Concrete Ultra Low VOC is a high-performance concrete coating that can be applied directly onto concrete surfaces without any acid etching. Rust Bullet® DuraGrade™ Concrete Ultra Low VOC is a single component urethane resistant to UV rays, acid splash and chemical solvents. It is ideal for any indoor or outdoor concrete surface. Due to its UV resistance and adhesion properties, Rust Bullet® DuraGrade™ Concrete Ultra Low VOC requires no topcoat or base/primer coat. Apply by brush, roller, or spray equipment. VOC compliant in all 50 states and Air Quality Management Districts.

SU 5039 is a nona(9) functional aliphatic urethane acrylate oligomer developed for UV/EB cure coating applications requiring fast cure response, excellent hardness, very good abrasion resistance and non-yellowing properties.

URE-SEAL H2O™ – Gloss has excellent abrasion and chemical resistance with a gloss, mid gloss, or natural finish (Keep in mind that the ‘Gloss’ blend will appear as semi-gloss when applied on brick pavers). The mild odor makes it ideal for interior applications. Ure-Seal H2O will not yellow and will form a very hard protective coating for high traffic areas, counter tops, restaurants, decorative concrete & brick pavers. Ure-Seal H2O can be used over epoxy flooring, garage floors, anywhere that high durability and superior chemical resistance is required

MCU-101 is a single component, high performing; moisture cured clear urethane coating that dries quickly to a hard abrasion resistant film. MCU-101 is used as a primer and/or a topcoat for concrete or wood surfaces. MCU-101 is ideal as a clear primer over concrete to help eliminate dusting due to concrete laitance and to help prevent spalling due to thermo shock freeze/thaw cycles. Due to its excellent impact and abrasion resistance, MCU-101 is widely used in heavy traffic areas. MCU-101 is also used as a primer under our thin film chemical resistant coating systems.

POLY ENHANCE (CLEAR) is two-component low-viscosity acrylic urethane coating, primarily for exterior applications. Used to prime or seal various substrates including concrete, decorative or stamped concrete, exposed aggregate, paver stone and brick.

Urocel W is a chemical resistant two-component water-based aliphatic urethane coating having exceptional resistance to most chemicals and excellent anti-soil properties. Displays excellent gloss retention on extended exterior exposures. Odor-free, high gloss coating for areas where solvent odor is a problem.

SU 520 is a deca(10)-functional aliphatic urethane acrylate oligomer developed for UV/EB cure coating applications requiring good abrasion resistance, extreme fast cure response, high hardness and non-yellowing properties.

SU 588is an aliphatic urethane triacrylate oligomer diluted with approx. 10% of ethoxy-ethoxyethyl acrylate (EOEOEA).developed for UV/EB cure coating applications requiring excellent abrasion resistance, good toughness, fast cure response and the non-yellowing properties typical of an aliphatic urethane.

Coating & Binding Technology PC 4000 is a two-component Polyaspartic urethane coating system that exhibits fast cure time, high solids, low-viscosity, high strength, UV resistant, reduced odor, and no VOC. PC 4000 has an extended working time and usable pot-life especially in elevated temperatures and humid conditions.

SU 594 is a tri-functional aliphatic urethane acrylate oligomer with 1,6-hexanediol diacrylate. This product is characterized good stain resistance, good abrasion resistance and non-yellowing properties.

Carbamac® 43-4310 is an oil-modified polyurethane resin with good hardness and abrasion resistance balanced with fast through-dry. Manufactured in North America. All components of this product are listed on the DSL.

SU 5030 is a hexa-functional aliphatic urethane acrylate oligomer with 31% butyl acetate developed for UV/EB cure coating applications requiring excellent adhesion on difficult substrate, extreme fast cure response and non-yellowing properties.

GymShoe® Gloss Sport Floor Finish is a two component, clear, waterbased sport floor finish specifically formulated to perform on basketball and other wood sport floors. GymShoe dries clear with excellent application characteristics and extreme durability.

URS 1560 is a clear, one-component, non-yellowing urethane coating that can be applied directly to surfaces as a sealer / surfacer in single or multiple coat applications. URS 1560 is recommended for applications requiring high abrasion and chemical resistance, such as floor and deck coating, masonry sealer, and so on.

Urocel 65 is a high solids chemical resistant two-component saturated polyester aliphatic urethane coating having exceptional resistance to most chemicals and excellent anti-soil properties. Displays excellent gloss retention on extended exterior exposures.

Carbamac® 43-4355 is an oil-modified polyurethane resin. Manufactured in North America. All components of this product are listed on the DSL.

Micorthane™ 6-75P Elastometric Primer is a two component, high solids urethane elastomer primer, that remains flexible even at extremely low temperatures. This 82.0% non-volatile primer provides an extremely flexible membrane which has excellent resistance to water, aqueous acids, bases and salts. The high degree of strength and flexibility provided by this coating reduces failures due to cracking or shifting of substrata.