Products in Floor Coatings: High Gloss

SILRES® BS 30 is a solventless silicone concentrate based on a mixture of silane and siloxane. In its undiluted form, it provides water and stain repellency to mineral substrates while enhancing their appearance. SILRES® BS 30 is suitable for a wide variety of mineral substrates used in the tile industry, including tumbled marble, limestone, slate, and saltillo clay tile.

TOP KOTE is a self-polishing floor finish designed to give tile floors a durable high gloss finish. TOP KOTE dries to a crystal clear, scuff and heel mark resistant, protective coating. TOP KOTE will prolong the life of a sealed tile floor, acting as a sacrificial protective layer for the tile. The floor finish can be reapplied as needed to refresh the appearance of the floor, and can easily be removed with MOP OFF.

DeVere Chemical Ultra Kote is a superior, metal cross-linked floor finish with 18% solids. It is designed to meet today’s demands for fast drying, high gloss, and low maintenance finishes. Ultra Kote is designed to be buffed once a week or less. Choose this product for super hardness, high wet-look gloss, durability, and slip resistance.

FloorShield HP a high performance industrial flooring surface hardener and protective clear coat. This floor treatment is a micro film forming hybrid inorganic/organic nanolithium coating that hardens and seals concrete floors, producing a very hard, dust repellent, chemical resistant and water tight surface..

SL EPOXY (CLEAR) is two-component low-odor, 100% solids, high-build epoxy floor coating designed for applications where heavy-duty protection is required. Easy-touse, self-leveling and delivers a high gloss and chemically resistant surface. As part of metallic coating systems, may be combined with metallic powder as a color coat.

DRYLOK® WetLook Clear High Gloss Penetrating Sealer is a clear, nonyellowing, water-based acrylic coating formulated for use on interior or exterior masonry surfaces. Provides superior hardness and durability. Protects against efflorescence (white, powdery, salt-like deposits) visible on the masonry. Built in flash rust resistance prevents orange staining of surface when applied to masonry containing natural metals. Excellent chemical resistance to de-icing salts. Compatible with polymeric sand.

ProCoat® Radcoat® RX UV Curable Finish Matte is an instant cured aliphatic UV waterborne urethane. It is formulated for onsite heavy commercial applications where down times are limited. This new polymerization technology yields a coating with excellent scuff, scratch, abrasion and chemical resistance. Since Radcoat® cures instantly with UV light, your floors can be 100% cured and can be returned to service immediately. This enables your customers to maintain the beauty of their floor with the fastest and most durable system.

Resiflow FC is a two component self smoothing flooring system. This smooth, gloss, resin flooring is highly abrasion and chemical resistant. It is used generally in manufacturing and commercial premises where a good quality surface is required. It is laid at a thickness of between 0.5 and 1.5mm.

CHEM-FLOOR S is a two component, 100% solids, hi modulus, glossy, heavy-duty, epoxy floor coating syste CHEM-FLOOR S exhibits excellent chemical resistant to vari chemical reagents.

A two component, high solids, high build polyamide epoxy topcoat specially formulated to protect steel and concrete in corrosive aggressive environments. Poly-Chemcure PC-200 provides excellent resistance to a wide range of industrial chemicals while maintaining good flexibility and weathering properties. PC-200 has a high gloss tile-like finish.

Armorgarage Standard Duty Acid Resistant Epoxy Flooring is great for grow facilities, breweries and large warehouses that have a large number of electric forklifts or use caustic process and or cleaning agents. This is also the perfect product for any facility such as food production facilities that require lots of caustic wash downs.

EP 600 Series is a two component 100% (+/- 1%) solids epoxy colored coating designed for applications where a high build colorfast impact resistant floor is needed.

Surfa-Seal W is a clear gloss finish. It assumes the texture of the surface to which it is applied. For normal cleaning, use detergent and water. Wax may be applied. For light stain removal use mineral spirits. Damaged areas are easily touched up by a brush or roller.

CTM Coatings UCTR-4950 is a two-component, high solids, UV stable moisture-cure polyurea topcoat. It provides a high-gloss finish with superior chemical resistance. It exhibits excellent physical properties and is designed to withstand industrial traffic. It can be applied over an epoxy-primer or used to re-coat existing epoxy or urethane floor.

Onyx Concrete Coatings Epoxy Top Coat Fast is a milky gray or colored liquid with faint epoxy odor used as an epoxy resin.

Miraflor ESD is a two-component, chemically resistant, water-based epoxy floor coating system available in gloss and satin formulations.

Protective Industrial Polymers PIP 2100 UR-Gloss is a high-solids, two part, aliphatic clear polyurethane coating. PIP 2100 UR-Gloss is formulated to greatly reduce damaging UV rays from penetrating and yellowing an epoxy basecoat. PIP 2100 UR-Gloss is recommended as the clear finishing coat on decorative flake, quartz or metallic pigmented flooring systems. Added abrasion resistance may be obtained with the optional DiamondWear additive or GlossGrip #10 additive. Addition of the DiamondWear Additive will result in a satin finish whereas the addition of GlossGrip #10 will maintain gloss and exhibit slight skid resistance and easily cleaned finish.

Polygem 738 UV Stable Gloss Water Based Urethane is a water based UV stable paint. This product is available in 10 lbs packaging with approximate 14 x 7 x 8 inches dimension. Polygem 738 gives a glossy finish.

TS202 is a 25% solids high performance proprietary formulation of non-yellowing pure acrylic polymer resin in a <100 g/L VOC water base. It can be used as a curing agent for newly placed concrete or for sealing existing decorative concrete, pavers, or exposed aggregate. TS202 provides durable protection, color enhancement, and low gloss “satin look” appearance. It combats freeze/ thaw, restricts water and moisture, limits dirt buildup and stains, retards mold and mildew, blocks efflorescence, increases surface durability, and reduces scaling and spalling. The TS202 can also be used to mitigate dusting on most existing concrete surfaces. It is also UV resistant and nonyellowing. It can also be used as a joint sand stabilizer for interlocking stone, pavers, and brick. It locks pavers in place, prevents erosion of joint sand, and reduces growth of weeds. TS202 has a milky white appearance. Upon proper application, the substrate will have a “satin look” with low gloss finish when dry.

SureFinish™ is an industrial floor finish providing exceptional performance and adherence to both resilient and non-resilient hard surface interior flooring. It may be applied like a conventional floor finish to terrazzo, quarry tile, brick, slate, unglazed ceramic tile, mexican tile, and stone surfaces.

Chemtek Products CF-300 EPOXI-BRITEdries to a bright gloss durable finish that prevents chemical and dusting of concrete floors.

Protective Industrial Polymers PIP 2200 UR is the 100g/L VOC version of PIP 2100 UR. It is specifically formulated for use in geographical areas where maximum VOC restrictions are set at 100g/L for industrial maintenance coatings. PIP 2200 UR is a high-solids, high-gloss, two or three-part, aliphatic clear or pigmented polyurethane coating. It can be applied over an epoxy primer or used to recoat an existing epoxy or urethane floor.

ProCoat® H₂Oil® - Oil Modified Waterborne Finish Gloss is a one-component, self-leveling oil modified waterborne urethane. H2Oil® self-crosslinks when exposed to oxygen to develop an extremely durable film that exhibits outstanding scuff, mar and chemical resistance. It has the depth and gloss of an oil modified urethane (O.M.U.) H2Oil® is formulated for the best transition from oil based to waterborne wood finish.

Emulsion® PRO+ Floor Finish and Sealer (B6075) is a one-component, ambering, commercial grade, self-leveling sealer and finish for wood flooring. This product is an excellent choice for professionals that are looking to make the transition from OMUs (oil-modified urethanes) to waterbased finishes, or for professionals looking for an ambering finish that delivers a rich look of traditional oil but with all the advantages of a commercial waterbased finish.

Monochem 21 is a 2-component, 100% solids, high-build, liquid applied, Polyamine, Cyclo-Aliphatic Epoxy. Monochem 21 is available in high gloss, clear, standard colors and can be mixed with decorative chips, color micas, or silica sand. It is designed as a high performance primer, base coat or interior top coat.

Trimafloor 2700 is a two pack epoxy, water based gloss floor paint.

SPARTACOTE® Surface Build is a high solids, multipurpose, self-leveling epoxy for decorative and protective applications. It offers excellent abrasion and chemical resistance. Provided as a clear epoxy product it can be field tinted through the use of SPARTACOTE Universal Pigments.

CERTI-VEX AC1315 Super Seal is a low-VOC, styrene acrylic, solvent-based, non-yellowing curing, sealing, hardening, dust proofing and water repellent compound that is tough, chemical resistant, and long lasting. The product is design to protect and enhance exterior new and existing concrete, stamped, decorative and exposed aggregate concrete and architectural horizontal and vertical sections where a clear, gloss and shine is required. Certi-Vex AC 1315 Super Seal also provides protection from the damaging effects of water penetration and staining. Certi-Vex AC1315 Super Seal features breathable technology which allows moisture vapor to pass through rather than becoming trapped, preventing whitening, peeling and flaking.

CHEM-HCR coating is a two-component, solvent free ep floor coating system that is high in chemical resistance. CHE HCR coating produces a dense tile like coating that will prot walls and floors. CHEM-HCR can be applied on both concr and steel surfaces.

Onyx Concrete Coatings Polyaspartic 90 is a two component, high solids, aliphatic polyaspartic finish floor coating, formulated to give the highest solids content with the lowest viscosity 90% solids and 0-V.O.C. Polyaspartic 90 provides a high gloss finish and is the product of choice for a high build interior/ exterior top coat. It is designed to be applied at 5-20 mils (DFT), for durability, stain resistance, and a finish coat which beautifies concrete for years simply unmatched. It is also formulated to be used with virtually all other Onyx base systems.

Aiflooring TerraSeal is designed to be used as a stand-alone thin film system, a silica broadcast system, and the topcoat for the TerraRich system. It provides continuous chemical protection while providing a high-gloss, nonblushing finish for an outstanding appearance. It can be applied from 16-65 mils in smooth or anti-skid applications with moderate physical requirements and intermittent chemical exposure. TerraGrip can be added to TerraSeal to provide slip resistance. It is a two component 100% solids epoxy coatings cured with a cycloaliphatic amine.

ChemMasters’ Traz 25-A is a high solids, Low Volatile Organic Compound (V.O.C.) high performance concrete sealing compound for decorative concrete such as stamped and exposed aggregate. Traz 25-A is formulated with methyl methacrylate polymers that develop high gloss and are more chemically resistant than standard acrylic sealers. Traz 25- A’s film will not yellow under any UV conditions and is extremely durable.

Armor WB25 is a water-based acrylic cure and seal designed to seal and protect concrete and paver surfaces with a durable high gloss surface film. The Armor WB25 is a fantastic sealer if you are looking to enhance surfaces with a high gloss finish. The Armor WB25 also doubles as a cure and seal and can be applied to new concrete.

DecoTop Clear Plus (707) is a two (2) component 100% solids waterclear epoxy that is specifically formulated to be a highperformance, U.V. resistant, extremely durable, high gloss protective coating. Deco Top Clear is expressly recommended for interior applications.

CHEM-FLOOR is a two-component, 100% solids, high modulus, high gloss, heavy duty, clear or pigmented epoxy floor coating system. CHEM-FLOOR system is used as a protective floor coating for concrete floors and as a high gloss seal coating for heavy-duty epoxy mortar screeds. The system is also used as a high gloss coating, non-slip aggregate flooring. It has an excellent abrasion and chemical resistance.

A low viscosity, two component polyamide modified epoxy primer/sealer formulated with unique wetting agents to provide maximum penetration into concrete surfaces. PC-149 seals concrete surfaces from penetration of water and chemicals which cause concrete deterioration and spalling. Ideal for both new and old concrete surfaces for exterior or interior exposures. PC-149 is also used as a primer for epoxy and polyurethane top coats.