Products in Other Flooring & Surface Applications: Chemical Resistant

ARCOR® Spraythane FL is a high elongation, elastomeric, hybridized epoxy/urethane coating. It offers exceptional resilience, tear resistance, and impact resistance, making it an excellent choice for combatting cavitation and abrasion. This versatile coating is fully compatible with epoxy coatings. The urethane aspect of ARCOR® Spraythane FL delivers a tough and flexible resilience, while the epoxy aspect provides improved water and chemical resistance, as well as shelf stability. Notably, the epoxy reactivity of this product eliminates the moisture sensitivity and toxicity commonly associated with traditional urethanes. ARCOR® Spraythane FL is a reliable and durable solution for a wide range of coating applications. ARCOR Epoxy Technologies can tailor make or reformulate the product to suit customer needs. Please reach out if you need a custom formulated product!

ARCOR® Spraythane is a high elongation, elastomeric, hybridized epoxy/urethane coating. It offers exceptional resilience, tear resistance, and impact resistance, making it an excellent choice for combating cavitation and abrasion. This versatile coating is fully compatible with epoxy coatings. The combination of epoxy and urethane in ARCOR® Spraythane provides a durable and flexible resilience, along with improved water and chemical resistance. It also boasts excellent shelf stability. Unlike traditional urethanes, ARCOR® Spraythane's epoxy reactivity eliminates moisture sensitivity and toxicity concerns. This coating delivers a smooth finish and effortlessly self-levels in horizontal applications. ARCOR Epoxy Technologies can tailor make or reformulate the product to suit customer needs. Please reach out if you need a custom formulated product!

Protective Industrial Polymers PIP 100 ESD HB is a high solids, three-component, high-build epoxy resin system designed to facilitate electrostatic control. PIP 100 ESD HB is supplied with a blended cycloaliphatic amine curing agent that exhibits good UV and chemical resistance. This product produces a durable gloss finish.

Westcoat EC-11 Water-Based Epoxy is a premium quality two-component, chemical resistant, long pot life epoxy coating. It provides epoxy toughness, medium gloss and durability, with the convenience of a waterbased system.

Soudabond subfloor gun foam is a ready-to-use, single component, high strength, fast curing polyurethane adhesive that collapses to a gel immediately after dispensing. It is used for clean, efficient and economical permanent subfloor bonding in building and construction. Soudabond Subfloor does not contain CFC’s or HCFC’s.

Polygem 519 High Temperature Ceramic Tile Adhesive is our industry standard epoxy tile adhesive for use in environments up to 400°F. The Polygem 519 is a thixotropic gel that can adhere tiles applied to vertical and overhead surfaces. The #519 is formulated to provide for a tenacious bond to most ceramic, metal, concrete, fiberglass or wood surfaces. Polygem 519 is moisture resistant and will even cure underwater.

Westcoat EC-12 Epoxy Primer is a two-component, 100% solids, low viscosity, moisture tolerant, fast drying, high strength and multi-purpose epoxy primer.

ArmorBond (730) is a two (2) component, 100% solids epoxy polymer Base Coat system for medium and general use applications where a normal cure formulation can be tolerated. Blended with select aggregates, this system can be trowel applied as an overlay system or applied as a slurry system with optional broadcast aggregate. 730 ArmorBond, when coated with one of the appropriate topcoats, provides very good impact, abrasion and chemical resistance characteristics.

Nuceq R9-2039/HD-1095 M1 system is a 100% solid epoxy system that cures at room temperature.

Polygem 1325 Brushable Ceramic Epoxy Coating is a brushable epoxy coating specially blended with abrasion resistant ceramic fillers to provide a durable barrier to protect surfaces subjected to wear and abrasion. Polygem 1325 is easy and apply by brush to most surfaces. Polygem 1325 is waterproof and resistant to most chemicals and solvents. Polygem 1325 is a thick and creamy epoxy coating will allow for vertical and overhead application.

Leeson Polyurethane D2877 is a mositure cure single component adhesive - D4 rated to EN 204.

KALMATRON® KF-SEA is an admixture to the regular concrete mixes containing unwashed sea-sand and sea- gravel where hydration of cement may be provided with sea- water as well. Gray powder with specific smell. After application the smell disappears. The non-organic cementitious compound discharge electrochemical potential of the most sea-salts that are aggressive to the concrete structure.

Eclectic E6000 Industrial Adhesive (Clear) is a unique SELF-LEVELING, non-flammable industrial adhesive formulated to meet high-performance requirements. It permanently adheres to more surfaces than virtually any other adhesive, providing exceptional adhesion to wood, metal, glass, fiberglass, ceramics, masonry, concrete, asphalt, leather, rubber, PVC, neoprene, vinyl and many plastics. E6000 maintains its flexible bond in extreme cold temperatures, will not crack or become brittle and is excellent for bonding items subject to vibration. For applications that are exposed to direct sunlight, paint over E6000 after curing or use E6800 UV formula.

Westcoat EC-34 Epoxy Topcoat is a two-component, 100% solids, medium viscosity, low odor, high-build, chemical resistant epoxy.

Leeson Polyurethane Leeson PU Sealer Int 1 Coating (PU4170) is non-hazardous, fast curing PU self-smoothing resin for industrial and commercial flooring.

Westcoat EC-38 Liquid Dazzle® Epoxy ® is a two-component, 100% solids epoxy made with proprietary metallic additives that create an evolving drift dynamic in this unique epoxy. It is a decorative, glossy, durable, mar and chemical-resistant coating. This highly decorative epoxy comes in many metallic colors.

Cruspec 6000 2K Water Base Epoxy is an extremely durable, easy to apply epoxy. Excellent abrasion, chemical resistance, & low VOC. Brush, roll, or spray.

Arabian Chemical Industries ISOFIX is a non- reemulsifiable liquid emulsion of pure acrylic polymer and modifiers specially formulated for improvingthe physical properties and adhesion of portland cement mixes. ISOFIX improves the tensile, flexural, adhesive, cohesiveand weathering properties of cementitious mixtures. It is non-yellowing and has excellent resistance to UV degradation, hydrolysis and most chemicals. Mixtures containing ISOFIX can be used above or below ground, exterior or interior.

Carbo-Alkor® Mortar is a 100% carbon filled, specially formulated furan mortar for chemical resistant brick and tile construction.

Polygem 580FS Fast Set Tile Adhesive is a specially formulated epoxy paste to provide a fast setting patching compound for immediate protection of surfaces subject to wear and abrasion. Polygem 580FS is an easy to mix 1 to 1 by volume ratio and will cure in as little as 15 minutes. Polygem 580FS is ideal for emergency repairs and will minimize down-time of critical equipment and process lines. Polygem 580FS is waterproof and resistant to most chemicals and solvents. Polygem 580FS is a thick non-sag paste compound that will allow for vertical and overhead patching.

Polygem 307 Ceramic Tile Adhesive is our industry standard epoxy tile adhesive. The 307 is a thixotropic gel that can adhere tiles applied to vertical and overhead surfaces. The Polygem 307 Ceramic Tile Adhesive is formulated to provide for a tenacious bond to most ceramic, metal, concrete, fiberglass or wood surfaces. Polygem 307 Ceramic Tile Adhesive is moisture resistant and will even cure underwater.

Crown General PVC-foam D.170/200QR is medium quick recovery foam has an open cell structure and can be used for various applications as a cost-effective and high quality foam solution. This foam recovers instantly after compression and is mainly used as air and dust seal. This medium density foam is available in different thicknesses, colors and with special options.

UNIQUE FLEXICRETE® XP Polymer Modified Mortar is an easy to use polymer modified non-shrink/volume stable trowel grade mortar.

MiraFlor WB is a two-component, 40% solids, water-based self-priming epoxy coating designed for use in multiple types of flooring applications. It can be installed neat for thin film flooring applications or with the addition of synthetic aggregate for improved slip resistance.

ArmorPrime 100 (734) is a straw colored 100% solids, two (2) component epoxy primer used over concrete substrates to promote adhesion and to seal old or new concrete to help prevent bubbles from occurring which are typically associated with concrete outgassing.

Sinmast 501 is a 100% solids, flexibilized two-part epoxy joint filler specifically formulated to meet the punishing demands of today’s industrial floors. Sinmast 501 is used to fill and repair joints and cracks subjected to hard wheeled traffic and will provide for a flexible and durable surface. It is flexible, resilient and will help protect floor cracks, saw-cut and control joints from cracking or spalling of the joint edges. Sinmast 501 can also be mixed with sand and applied as a coating for a resilient non-skid surface.

Chemester® Mortar is an epoxy novolac based vinyl ester resin mortar for chemical resistant brick and tile vessel construction.

Onyx Concrete Coatings High Clear Epoxy Fast is a two component, high performance cycloaliphatic 100% solids clear epoxy which provides a durable, high gloss finish which beautifies concrete for years. The epoxy chemistry provides excellent bonding characteristics and its low viscosity allows deep penetrating into a concrete substrate. It can be used as a clear top coat, for chip floors or as the resin of choice when applying color quartz. High Clear Fast Epoxy cures in four hours at 70°F (About half the time of most conventional epoxy systems).

Westcoat EC-32 High Build Clear Epoxy Topcoat is a two-component, 100% solids, high-build, high viscosity, cyclo-aliphatic, chemical resistant epoxy. This highly versatile epoxy coating has superior clarity.

Raycrete SL is a cementitious polyurethane with high mechanical and chemical resistance and without solvents. Its properties make it a very suitable pavement for applications in the food industry, in food processing plants or for the chemical and pharmaceutical industries. The mortar self-leveling Raycrete SL is a real wonder for applications on all those floors subjected to significant aggressions of cleaning and disinfection. This makes it ideal for applications in the food industry.

Carbo Vitrobond® Mortar is a 100% carbon filled, plasticized, hot-pour, sulfur based mortar. It is easily melted, does not settle out in the pot, has very little odor, pours smoothly and freely and is dense and strong. The principle use of Carbo Vitrobond® Mortar is for corrosive conditions involving hydrofluoric acid or fluoride salts. It has the same chemical resistance as VITROBOND as well as fluoride resistance. Carbo Vitrobond® Mortar can be used as a bonding agent for acid resistant brick in lining reaction vessels, storage tanks, towers, trenches, sumps, processing tanks and equipment, pickling tanks for stainless steel and waste treatment tanks. It is also used in the installation of corrosion resistant industrial floors. CARBO-VITROBOND may be used in a variety of special applications.

Onyx Concrete Coatings High Clear Epoxy is a two component, high performance cycloaliphatic 100% solids clear epoxy which provides a durable, high gloss finish which beautifies concrete for years. The epoxy chemistry provides excellent bonding characteristics and its low viscosity allows deep penetrating into a concrete substrate. It can be used as a clear top coat, for chip floors or as the Resin of choice when applying color quartz. High Clear Epoxy has about an 8 hour cure time.

Cruspec 5000 Solvent Base Epoxy is an extremely durable, surface tolerant, easy to apply epoxy. Excellent abrasion, chemical resistance, & Low VOC. Brush, roll, or spray.