Products in Other Flooring & Surface Applications: Low Odor

Protective Industrial Polymers PIP 100 ESD HB is a high solids, three-component, high-build epoxy resin system designed to facilitate electrostatic control. PIP 100 ESD HB is supplied with a blended cycloaliphatic amine curing agent that exhibits good UV and chemical resistance. This product produces a durable gloss finish.

Helmibond 870 is a solvent-free, conductive, acrylic adhesive formulated to permanently install conductive resilient tile and sheet flooring, rubber tile flooring and rubber sheet flooring. To insure product stability and reduce joint openings, Helmibond 870 has been formulated to produce a hard set and firm bond line less susceptible to indentation and telegraphing. May be used over properly prepared porous and non-porous surfaces such as concrete, underlayment grade plywood, cementitious based patching compounds and levelers.

Helmibond 6504 is a solvent-free, waterborne, polychloroprene contact adhesive formulated for installation of vinyl and rubber flooring products, moldings and stair treads. Maybe used over properly prepared porous and non-porous surfaces. Helmibond 6504 is designed versatility with excellent tack, high heat resistance and excellent bond strength.

Protective Industrial Polymers PIP 1000 Thixo HB is a two-or three component, 100% solids, low odor, epoxy resin coating system. PIP 1000 Thixo is primarily designed to grout PIP epoxy mortar systems. PIP 1000 Thixo exhibits a higher degree of body and thixotropy when compared with PIP 1000 Grout or PIP 1000 Gel. PIP 1000 Thixo may also be used as the binder in combination with decorative quartz and silica sand aggregate for vertical cove applications. PIP 1000 Thixo may be used in combination with 1000ST-B hardener for fine crack filling, or skim coat patching needs. PIP 1000 Thixo is supplied with a choice of curing agents to achieve specific cure rates, chemical resistance requirements, utility and final esthetics.

HELMIBOND 6523 is a solvent-free, acrylic, pressure sensitive conductive and static dissipative releasable adhesive formulated to install conductive and static dissipative resilient tile and sheet flooring, rubber tile flooring and rubber sheet flooring. To insure product stability and reduce joint openings, HELMIBOND 6523 has been formulated to produce a firm bond line less susceptible to indentation and telegraphing. May be used over properly prepared porous and non-porous surfaces such as concrete, underlayment grade plywood, cementitious based patching compounds and levelers.

Westcoat EC-34 Epoxy Topcoat is a two-component, 100% solids, medium viscosity, low odor, high-build, chemical resistant epoxy.

Wall Bond Tile Adhesive is a professional wall & floor tile adhesive with high bond strengths. Designed for use in residential and light commercial interior applications with all types of non-vitreous & vitreous ceramic floor and wall tile.

HELMIBOND 867 is a solvent-free, acrylic adhesive formulated to permanently install luxury vinyl tile and plank flooring, resilient sheet vinyl flooring, rubber tile flooring and rubber sheet flooring and rubber and vinyl stair treads. To insure product stability and reduce joint openings, HELMIBOND 867 has been formulated to produce a hard set and firm bond line less susceptible to indentation and telegraphing. May be used over properly prepared porous and non-porous surfaces such as concrete, underlayment grade plywood, cementitious based patching compounds and levelers.

HELMIBOND 6503 is a solvent-free, acrylic adhesive formulated to permanently install luxury vinyl tile and plank flooring, resilient sheet vinyl flooring, rubber tile flooring and rubber sheet flooring and rubber and vinyl stair treads. To insure product stability and reduce joint openings, HELMIBOND 6503 has been formulated to produce a hard set and firm bond line less susceptible to indentation and telegraphing. May be used over properly prepared porous and non-porous surfaces such as concrete, underlayment grade plywood, cementitious based patching compounds and levelers.

Westcoat EC-38 Liquid Dazzle® Epoxy ® is a two-component, 100% solids epoxy made with proprietary metallic additives that create an evolving drift dynamic in this unique epoxy. It is a decorative, glossy, durable, mar and chemical-resistant coating. This highly decorative epoxy comes in many metallic colors.

CASA 240-PS Pressure Sensitive Adhesive is a versatile, water-based, clear acrylic co-polymer adhesive that is solvent free, low odor, contains no hazardous chemicals, for use with vinyl sheet flooring and carpet tiles.

Helmibond 6517 is a solvent-free, acrylic, pressure sensitive conductive and static dissipative adhesive formulated to permanently install conductive and static dissipative resilient tile and sheet flooring, rubber tile flooring and rubber sheet flooring. To insure product stability and reduce joint openings, Helmibond 6517 has been formulated to produce a firm bond line less susceptible to indentation and telegraphing. May be used over properly prepared porous and non-porous surfaces such as concrete, underlayment grade plywood, cementitious based patching compounds and levelers.

Protective Industrial Polymers PIP 1000 Thixo CR is a two-or three component, 100% solids, low odor, epoxy resin coating system. PIP 1000 Thixo is primarily designed to grout PIP epoxy mortar systems. PIP 1000 Thixo exhibits a higher degree of body and thixotropy when compared with PIP 1000 Grout or PIP 1000 Gel. PIP 1000 Thixo may also be used as the binder in combination with decorative quartz and silica sand aggregate for vertical cove applications. PIP 1000 Thixo may be used in combination with 1000ST-B hardener for fine crack filling, or skim coat patching needs. PIP 1000 Thixo is supplied with a choice of curing agents to achieve specific cure rates, chemical resistance requirements, utility and final esthetics.

Polygem 1325 Brushable Ceramic Epoxy Coating is a brushable epoxy coating specially blended with abrasion resistant ceramic fillers to provide a durable barrier to protect surfaces subjected to wear and abrasion. Polygem 1325 is easy and apply by brush to most surfaces. Polygem 1325 is waterproof and resistant to most chemicals and solvents. Polygem 1325 is a thick and creamy epoxy coating will allow for vertical and overhead application.

Helmicol 3041 is a fast reacting two-component solvent-free, epoxy nose caulking adhesive formulated for use with rubber and vinyl stair treads. Helmicol 3041 may also be used to permanently install luxury vinyl tile and plank flooring, resilient sheet vinyl flooring, rubber tile flooring and rubber sheet flooring and rubber and vinyl stair treads. Helmicol 3041 has been formulated to produce a superior, hard setting bond required for use in high traffic applications. May be used over properly prepared porous and non-porous surfaces such as concrete, underlayment grade plywood, cementitious based patching compounds and levelers.

Helmicol 3031 is a two-component solvent-free, epoxy nose caulking adhesive formulated for use with rubber and vinyl stair treads. Helmicol 3031 is designed to fill the void between the nosing of the stair tread and the nosing of the step. Helmicol 3031 may also be used to permanently install luxury vinyl tile and plank flooring, resilient sheet vinyl flooring, rubber tile flooring and rubber sheet flooring and rubber and vinyl stair treads. Helmicol 3031 has been formulated to produce a superior, hard setting bond required for use in high traffic applications. May be used over properly prepared porous and non-porous surfaces such as concrete, underlayment grade plywood, cementitious based patching compounds and levelers.

Polygem 580FS Fast Set Tile Adhesive is a specially formulated epoxy paste to provide a fast setting patching compound for immediate protection of surfaces subject to wear and abrasion. Polygem 580FS is an easy to mix 1 to 1 by volume ratio and will cure in as little as 15 minutes. Polygem 580FS is ideal for emergency repairs and will minimize down-time of critical equipment and process lines. Polygem 580FS is waterproof and resistant to most chemicals and solvents. Polygem 580FS is a thick non-sag paste compound that will allow for vertical and overhead patching.

Soudacryl C834 is a one-part siliconised acrylic latex caulk designed for both interior and exterior use. Soudacryl C834 should only be used where moderate joint movement is anticipated.

DriTac Flooring Products 7400 Easy spread is a urethane wood flooring adhesive that is very easy to spread and dispense from the pail, allowing for increased productivity. It contains no water and provides a permanent bond.

Protective Industrial Polymers PIP 1000 Thixo ST is a two-or three component, 100% solids, low odor, epoxy resin coating system. PIP 1000 Thixo is primarily designed to grout PIP epoxy mortar systems. PIP 1000 Thixo exhibits a higher degree of body and thixotropy when compared with PIP 1000 Grout or PIP 1000 Gel. PIP 1000 Thixo may also be used as the binder in combination with decorative quartz and silica sand aggregate for vertical cove applications. PIP 1000 Thixo may be used in combination with 1000ST-B hardener for fine crack filling, or skim coat patching needs. PIP 1000 Thixo is supplied with a choice of curing agents to achieve specific cure rates, chemical resistance requirements, utility and final esthetics.

DriTac Flooring Products 9500 Ultra is a premium grade, “green” acrylic wood flooring adhesive that offers an easy spread formula with industry leading green grab characteristics. This adhesive cleans up very easily off the surface of hardwood flooring when wet or dry.

Polygem 1004 Fast Set Wearing Compound is a very fast setting epoxy paste specially formulated for the sealing of cracked concrete prior to injection with epoxy or urethane resin systems. Polygem 1004 Fast Set Wearing Compound is an easy to mix 1 to 1 by volume ratio and will be ready for injection in as little as 35 minutes. is the preferred epoxy for use in occupied areas such as residential or institutional work areas. Polygem 1004 Fast Set Wearing Compound is a thick non-sag paste compound that will allow for vertical and overhead patching.

Proflex® SP1 - Super Prime is a multi purpose sealer / primer is a pure acrylic based, solvent free product with multiple uses. SP1 may be used as a bonding agent with other Proflex® surface preparation products, modified mortars, adhesive, and membranes when adhering to difficult substrates such as gypsum based concrete, epoxy coatings, vct, non-cushioned sheet vinyl, glazed tile, terrazzo, glass, and metal. SP1 can also be used to prime metal and resin backed tile to allow for modified mortar installation. SP1 can also be used to encapsulates old adhesive residue, (including cut-back asphalt adhesive).

Carbo Vitrobond® Mortar is a 100% carbon filled, plasticized, hot-pour, sulfur based mortar. It is easily melted, does not settle out in the pot, has very little odor, pours smoothly and freely and is dense and strong. The principle use of Carbo Vitrobond® Mortar is for corrosive conditions involving hydrofluoric acid or fluoride salts. It has the same chemical resistance as VITROBOND as well as fluoride resistance. Carbo Vitrobond® Mortar can be used as a bonding agent for acid resistant brick in lining reaction vessels, storage tanks, towers, trenches, sumps, processing tanks and equipment, pickling tanks for stainless steel and waste treatment tanks. It is also used in the installation of corrosion resistant industrial floors. CARBO-VITROBOND may be used in a variety of special applications.

Protective Industrial Polymers PIP 1000 Thixo FS is a two-or three component, 100% solids, low odor, epoxy resin coating system. PIP 1000 Thixo is primarily designed to grout PIP epoxy mortar systems. PIP 1000 Thixo exhibits a higher degree of body and thixotropy when compared with PIP 1000 Grout or PIP 1000 Gel. PIP 1000 Thixo may also be used as the binder in combination with decorative quartz and silica sand aggregate for vertical cove applications. PIP 1000 Thixo may be used in combination with 1000ST-B hardener for fine crack filling, or skim coat patching needs. PIP 1000 Thixo is supplied with a choice of curing agents to achieve specific cure rates, chemical resistance requirements, utility and final esthetics.

Helmicol 3035 is a two-component, fast reacting, solvent-free, polyurethane adhesive formulated to permanently install luxury vinyl tile and plank flooring, resilient sheet vinyl flooring, rubber tile flooring and rubber sheet flooring and rubber and vinyl stair treads. Helmicol 3035 has been formulated to produce a superior, flexible bond required for use in high traffic applications. May be used over properly prepared porous and non-porous surfaces such as concrete, underlayment grade plywood, cementitious based patching compounds and levelers.

DriTac Flooring Products 7900 Super Grab is a single-component, moisture control urethane wood flooring adhesive developed for installing long and wide plank hardwood flooring.

Westcoat EC-32 High Build Clear Epoxy Topcoat is a two-component, 100% solids, high-build, high viscosity, cyclo-aliphatic, chemical resistant epoxy. This highly versatile epoxy coating has superior clarity.

Helmicol 3029 is a two-component solvent-free, polyurethane adhesive formulated to permanently install luxury vinyl tile and plank flooring, resilient sheet vinyl flooring, rubber tile flooring and rubber sheet flooring and rubber and vinyl stair treads. Helmicol 3029 has been formulated to produce a superior, flexible bond required for use in high traffic applications. May be used over properly prepared porous and non-porous surfaces such as concrete, underlayment grade plywood, cementitious based patching compounds and levelers.

HELMIBOND 6520 is a solvent-free, acrylic, pressure sensitive adhesive formulated to permanently install resilient floor tile including luxury vinyl tile and plank and resilient sheet flooring. To insure product stability and reduce joint openings, HELMIBOND 6520 has been formulated to produce a firm bond line less susceptible to indentation and telegraphing. May be used over properly prepared porous and non-porous surfaces such as concrete, underlayment grade plywood, cementitious based patching compounds and levelers.