Products in Coatings & Markings: Rheology Modifier

Pangel® OM4 is a rheological additive designed for intermediate to low polarity systems, formulated with highly purified bentonite clay. It's suitable for use with aliphatic solvents as well as mineral or synthetic oils. This standard organo-bentonite requires pregel preparation using a polar activator, making it ideal for low to medium-polarity solvent-based systems.

Pangel® B20 is a rheological additive derived from sepiolite (hydrated magnesium silicate), with its particle surface organically modified to ensure compatibility with medium and low polarity systems or solvents. It forms a three-dimensional network of particles, enhancing the viscosity and thixotropy of the end product. In epoxy coatings, Pangel® B20 offers the option for partial or complete substitution of fumed silicas and organophilic bentonites typically used as rheological additives, presenting additional cost-effective benefits in formulations.

Pangel® B10 is a product designed to effectively control the rheological properties of a system. Its micro-fibers form a reticulated, stable, and homogeneous network, Pangel® B10 enables the achievement of a pseudoplastic behavior and an optimal gel structure in the coating.

MIN-U-GEL 400 is a hydrous magnesium aluminum silicate with gelling and rheological properties used to thicken and stabilize aqueous systems. MIN-U-GEL® 400 can be used alone or in conjunction with associative thickeners where a low shear thixotrope is needed to support the high shear thixotropy of the associative thickener. MIN-U-GEL® 400 was developed especially with controlled properties specifically to function as a binder during the production of molecular sieves.

RheoFal™ 101 is an easy dispersing organically modified bentonite clay. It is especially suited for low to medium polarity solvent-based paints and coatings. It provides excellent viscosity build, sag control and anti-settling properties in these coating systems.

Lithosperse® 7005 CS is a high performance treated kaolin designed to improve rheology with outstanding dispersibility and resistance to clay bleed in lithographic cold set inks. Lithosperse® 7005 CS has been designed for mix, pump and filter production systems to minimize filter plugging.

PalyGel® 500B is widely used in paints & coatings, sealants & adhesives.

Polybut EM 30 (A-50) is a water-based emulsion of low molecular weight polybutene.

PalyGel® 500A is widely used in paints & coatings, sealants & adhesives.

Hubercarb® Q200 is a medium fine ground calcium carbonate produced at Huber’s Quincy, Illinois plant which is known for its natural uniformity producing consistent purity and brightness. The Q200 particle distribution offers a wide range of applications from carpet backing to cleansers, joint compounds to PVC flooring, concrete to oilfield drilling fluids where its low acid insoluble content is useful.

PalySorb® L16/30 is widely used in paints & coatings, sealants & adhesives.

Hubercarb® Q6 is a fine ground calcium carbonate produced at Huber’s Quincy, Illinois plant which is known for its natural uniformity producing consistent purity and brightness. Carefully controlled particle distribution allows the material to be used in a wide range of applications including paints, coatings, adhesives, caulks, plastics, and construction building products.

Polybut EM HR 1000 (A-75) is a water-based emulsion of low molecular weight polyisobutene.

SCG Chemicals LP1060P is a refined polyethylene homopolymer wax derived from the unique HDPE process by Thai Polyethylene Co., Ltd., a subsidiary of SCG Chemicals Co., Ltd. Under the operational excellent along with the high technology (close loop refinery), LPIO6OP is guaranteed its high quality for various applications.

Polybut EM 600(A-50) is a water-based emulsion of low molecular weight polybutene.

Polybut EM MM 15 (A-60) is a water-based emulsion of medium molecular weight polyisobutene.

Pine Rosins PR 388.2 is a Diethylene glycol esters of rosin that are obtained by the esterification of rosin with diethylene glycol. These resins are viscous liquids at room temperature and they are mainly used as tackifiers and plasticizers specially in floor coating adhesives, depilatory waxes and road marking paints.

LAVIOSA VISCOGEL™ XD is a new high performing, highly effective rheological additive for solvent-borne systems of low to medium polarity. that provides thixotropic effect, sag control, excellent leveling and prevents pigments from long-term storage settling. The nature of LAVIOSA VISCOGEL™ XD is a highly purified bentonite clay, organically modified with a quaternary alkylammonium compound. Unlike most of the other conventional organoclays, LAVIOSA VISCOGEL™ XD is selfactivating and easily dispersible, hence simple and convenient to use.

Polybut EM 0 (NI-50) is awater-based emulsion of low molecular weight polybutene.

Polybut EM MM 10(A-75) is a water-based emulsion of medium molecular weight polyisobutene.

PalyGel® 325A is widely used in sealants & adhesives, asphalt coatings, joint compound, molecular sieve.

SCG Chemicals LP1040T is a refined polyethylene homopolymer wax derived from the unique HDPE process by Thai Polyethylene Co., Ltd., a subsidiary of SCG Chemicals Co., Ltd. Under the operational excellent along with the high technology (close loop refinery), LP1O40T is guaranteed its high quality for various applications.

Polybut EM 190(A-50) is a water-based emulsion of low molecular weight polybutene.

UVP 0205, Di Propylene glycol diacrylate (DPGDA) is a Difunctional monomers, which polymerize when, expose to sources of free radicals. It is an excellent low viscosity economical diluent .It is compatible with a wide range of acrylated resins.

Xinyu South Wollastonite XYNFW-SA is a typical metamorphic mineral, which has primarily occurred in contact belt between acid rock and limestone, and sometimes occurred in deep metamorphic Calc schist, volcanic product and in some alkaline rock. Wollastonite is a thin plate-like crystal of triclinic crystal system whichbelongs to a chain silicate. Its aggregation is radial or fibrous. Its special crystal structure determines its properties, Wollastonite with the advantage of non-toxic, acid and alkali resistant, low hygroscopicity, low oil absorption, low conductivity, good insulation, high whiteness, thermal stability and dimensional stability good, excellent mechanical properties and electrical characteristics. Wollastonite is a natural green, low carbon emission and energy saving industrial mineral.

Polybut EM MM 10(A-60) is a water-based emulsion of medium molecular weight polyisobutene.

Polybut EM MM 15(A-75) is a water-based emulsion of medium molecular weight polyisobutene.

PalySorb® L6/16 is widely used in paints & coatings, sealants & adhesives.

PalyGel® 325B is widely used in sealants & adhesives, asphalt coatings, joint compound, molecular sieve.

LAVIOSA VISCOGEL™ ED is a rheological additive for solvent-borne systems of low to medium polarity. that provides thixotropic effect, sag control, excellent leveling and prevents pigments from long-term storage settling. The nature of LAVIOSA VISCOGEL™ ED is a bentonite clay, organically modified with a quaternary alkylammonium compound. Unlike most of the other conventional organoclays, LAVIOSA VISCOGEL™ ED is self-activating and easily dispersible, hence simple and convenient to use.

Polybut EM MM 12(A-75) is a water-based emulsion of medium molecular weight polyisobutene.

Polybut EM 200(A-50) is a water-based emulsion of low molecular weight polybutene.

King Honor International KH FT WAX 120 is the coal-based Fischer-Tropsch wax. It has a higher melting point and the lower penetration. KH FT wax 120 is suitable to be used in road marking paints. Presently, the thermoplastic traffic marking paint is the most widely used on the roads as the autonomous vehicle guidance. It is generally composed of thermoplastic resin, pigments, and fillers. The addition of FT wax 120 can improve the dispersibility of pigment and filler in thermoplastic resin, and improve paint fluidity, prevent sedimentation, adjust viscosity, improved wear and stain resistance.

SCG Chemicals LP1100P is a refined polyethylene homopolymer wax derived from the unique HDPE process by Thai Polyethylene Co., Ltd., a subsidiary of SCG Chemicals Co., Ltd. Under the operational excellent along with the high technology (close loop refinery), LP11IOOP is guaranteed its high quality for various applications.

MONORAL 3300 K is an unique synthetic amide wax applicable to a wide range of solvent base synthetic resin coating and develops an exceptionally strong and long lasting thixotropic structure.

Polybut EM 0 (NI-15) is a water-based emulsion of low molecular weight polybutene.