Products in Infrastructure, Roads & Paving: Rheology Modifier

PalySorb® R6/16 is widely used in paints & coatings, sealants & adhesives.

PalyGel® 400B is widely used in paints & coatings, sealants & adhesives, asphalt coatings, joint compound, molecular sieve.

Hydroxypropyl MethylCellulose (HPMC) are widely used in construction, pharmaceutical,food, cosmetic, detergent, paints, as thickener, emulsifier, film former, binder, dispersing agent, protective colloids.We can provide the regular grade HPMC, we also can provide modified HPMC according to customer requirements. After modified and surface treatment, we can get the goods which is dispersed in water quickly, lengthen open time, anti-sagging, etc.

Pine Rosins PR 388.1 is a Diethylene glycol esters of rosin that are obtained by the esterification of rosin with diethylene glycol. These resins are viscous liquids at room temperature and they are mainly used as tackifiers and plasticizers specially in floor coating adhesives, depilatory waxes and road marking paints.

LAVIOSA VISCOGEL™ XDS is a new high performing, highly effective rheological additive for solvent-borne systems of low to medium polarity. That provides thixotropic effect, sag control, excellent leveling and prevents pigments from long-term storage settling. Viscogel XDS disperses very easily even under low shear conditions. The nature of LAVIOSA VISCOGEL™ XDS is a highly purified bentonite clay, organically modified with a quaternary alkylammonium compound. Unlike most of the other conventional organoclays, LAVIOSA VISCOGEL™ XDS is selfactivating and easily dispersible, hence can be used at any point in the paint manufacturing process and can be used for post-correction.

Kraton D1152 E is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 29.5% mass. It is supplied from Europe in the physical form(s) identified below in the grade nomenclature: Kraton D1152 ES - supplied as porous pellets dusted with amorphous silica Kraton D1152 ET - supplied as porous pellets dusted with talc Kraton D1152 ESM - supplied as powder dusted with amorphous silica Kraton D1152 E is used in compound formulations and as a modifier of thermoplastics. It may also find use in formulating adhesives, sealants, coatings and modified bitumens.

Polybut EM MM 12(A-60) is a water-based emulsion of medium molecular weight polyisobutene.

Kraton D1189 A is a clear, radial block copolymer based on styrene and butadiene with bound styrene of 32% mass. It is supplied from Europe in the physical forms indicated in the grade nomenclature below. D1189 AT - supplied as porous pellets dusted with talc D1189 AS - supplied as porous pellets dusted with amorphous silica D1189 ASM - supplied as powder dusted with amorphous silica Kraton D1189 A is used as a modifier of bitumen or thermoplastics and in compound formulations. It is also suitable as an ingredient in formulating compounds for footwear applications and may be used in formulating adhesives, sealants and coatings.

Polybut EM 10 (NI-50) is a water-based emulsion of low molecular weight polybutene.

MONORAL AF3500 is an unique synthetic amide wax applicable to a wide range of solvent base synthetic resin coatings and develops an exceptionally strong and durable thixotropic structure.

Hydroxypropyl MethylCellulose (HPMC) are widely used in construction, pharmaceutical,food, cosmetic, detergent, paints, as thickener, emulsifier, film former, binder, dispersing agent, protective colloids.We can provide the regular grade HPMC, we also can provide modified HPMC according to customer requirements. After modified and surface treatment, we can get the goods which is dispersed in water quickly, lengthen open time, anti-sagging, etc.

Hydroxypropyl MethylCellulose (HPMC) are widely used in construction, pharmaceutical,food, cosmetic, detergent, paints, as thickener, emulsifier, film former, binder, dispersing agent, protective colloids.We can provide the regular grade HPMC, we also can provide modified HPMC according to customer requirements. After modified and surface treatment, we can get the goods which is dispersed in water quickly, lengthen open time, anti-sagging, etc.

Kraton D4153 E is an oil-extended linear block copolymer based on styrene and butadiene with bound styrene in the neat polymer of 35% mass. It contains 40 phr paraffinic oil which is classified as not hazardous. Information on the CAS and EINECS registry numbers of the paraffinic oil used for this grade is available on request. The product is supplied from Europe in the physical form identified below. Kraton D4153 ES - supplied as porous pellets dusted with an amorphous silica Kraton D4153 ESM - supplied as powder dusted with an amorphous silica Kraton D4153 E is used in formulating compounds for footwear, technical and general purpose applications. It can also be used in formulating adhesives, sealants and coatings and as a modifier of bitumen.

Polybut EM HR 1000 (A-55) is a water-based emulsion of low molecular weight polyisobutene.

PalySorb® R24/48 is widely used in paints & coatings, sealants & adhesives.

Kraton D1163 J is a clear linear block copolymer based on styrene and isoprene with bound styrene of 15% mass. It is supplied from Japan in the physical form(s) identified below in the grade nomenclature. Kraton D1163 JSP supplied as dusted, dense pellet. Kraton D1163 J is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen and polymers.

Kraton D4270 J is an oil-extended branched block copolymer based on styrene and butadiene, with bound styrene in the neat polymer of 32% mass. It is supplied from Japan in the physical forms below. Kraton D4270 JSP - supplied as dusted dense pellets Kraton D4270 JS - supplied as dusted crumb Kraton D4270 J is used for formulating compounds for footwear and general purpose applications and as a modifier of bitumen.

Kraton D1163 P is a clear, linear triblock copolymer based on styrene and isoprene, with a polystyrene content of 15%. It is supplied from North America in the physical form identified below. Kraton D1163 PT - supplied as a dusted dense pellet Kraton D1163 PTM - supplied as a dusted powder Kraton D1163 P is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen and polymers.

Kraton D1183 P is a clear, linear block copolymer based on styrene and isoprene with a polystyrene content of 16%. It is supplied from North America in the physical form identified below. Kraton D1183 P T - supplied as a dusted dense pellet Kraton D1183 P is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen and polymers.

Kraton D1192 E is a clear linear block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied from Europe in the physical forms described below: Kraton D1192 ET- supplied as porous pellets dusted with talc Kraton D1192 ES - supplied as porous pellets dusted with amorphous silica Kraton D1192 ESM - supplied as powder dusted with amorphous silica Kraton D1192 ETM - supplied as powder dusted with talc for the North American market Kraton D1192 ETF - supplied as fluffy crumbs dusted with talc Kraton D1192 E is used for modification of industrial and paving bitumen. It may also be suitable for use in formulating adhesives, sealants and coatings, and in the modification of polymers.

Kraton D1113 P is a clear, linear block copolymer based on styrene and isoprene with a polystyrene content of 16%. It is supplied from North America in the physical form identified below. Kraton D1113 PT - supplied as a dusted dense pellet Kraton D1113 P is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen or thermoplastics and in compound formulations.

Kraton D1118 E is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied from Europe in the physical form identified below. Kraton D1118 ET - supplied as porous pellets dusted with talc Kraton D1118 ES - supplied as porous pellets dusted with amorphous silica Kraton D1118 ESM - supplied as powder dusted with amorphous silica Kraton D1118 ETM - supplied as powder dusted with talc for the North American market Kraton D1118 E is used for modification of bitumen. It may also be suitable for use in formulating adhesives, sealants and coatings, and in the modification of polymers.

Kraton D1101 K is a clear, linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied from North America in the physical form identified below. Kraton D1101 KT - supplied as a dusted porous pellet Kraton D1101 KU - supplied as an undusted porous pellet Kraton D1101 KIM - supplied as a dusted powder Kraton D1101 K is used as a modifier of bitumen or thermoplastics and in compound formulations. It may also find use as an ingredient in formulating adhesives, sealants and coatings.

Kraton D1161 P is a clear, linear triblock copolymer based on styrene and isoprene, with a polystyrene content of 15%. It is supplied from North America in the physical form identified below. Kraton D1161 PT - supplied as a dusted dense pellet Kraton D1161 PTM - supplied as a dusted powder Kraton D1161 P is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen and polymers.

Kraton D0243 E polymer is a clear, diblock copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied from Europe in the physical form identified below. Kraton D0243 ET - supplied as a porous pellet dusted with talc Kraton D0243 E is used as a modifier of bitumen or thermoplastics and in compound formulations. It is also suitable as an ingredient in formulating compounds for footwear applications and may be used in formulating adhesives, sealants and coatings.

Kraton D1102 K is a clear, linear triblock copolymer based on styrene and butadiene, with a polystyrene content of 28%. It is supplied from North America in the physical form identified below. Kraton D1102 KT - supplied as a dusted porous pellet Kraton D1102 KU - supplied as an undusted porous pellet Kraton D1102 K is used as a modifier of bitumen or thermoplastics and in compound formulations. It is also suitable as an ingredient in formulating compounds for footwear applications and may be used in formulating adhesives, sealants and coatings.

Kraton D1157 E is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 29.5% mass. It is supplied from Europe in the physical form(s) identified below in the grade nomenclature: Kraton D1157 ES - supplied as porous pellets dusted with amorphous silica Kraton D1157 ETM - supplied as powder dusted with talc for the North American market Kraton D1157 E is used as a modifier of bitumen or thermoplastics and in compound formulations. It may also find use as an ingredient in formulating adhesives, sealants and coatings.

Kraton D1117 P is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 17%. It is supplied from North America in the physical form identified below. Kraton D1117 PT - supplied as a dusted dense pellet Kraton D1117 P is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen or thermoplastics and in compound formulations.

Kraton D1102 J is a clear linear block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied from Japan in the physical form(s) identified below in the grade nomenclature: Kraton D1102 JSZ - supplied as crumbs dusted with amorphous silica Kraton D1102 J is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen and polymers.

Kraton D1191 E is a clear, radial block copolymer based on styrene and butadiene with bound styrene of 33.5% mass. It is supplied from Europe in the physical forms described below. Kraton D1191 ES - supplied as porous pellets dusted with amorphous silica Kraton D1191 ET - supplied as porous pellets dusted with talc Kraton D1191 ESM - supplied as powder dusted with amorphous silica Kraton D1191 EIM - supplied as powder dusted with calcium carbonate for supply to the North American market Kraton D1191 E is used for modification of industrial and paving bitumen. It may also be suitable for use in formulating adhesives, sealants and coatings, and in the modification of polymers.

Kraton D0243 E polymer is a clear, diblock copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied from Europe in the physical form identified below. Kraton D0243 ET - supplied as a porous pellet dusted with talc Kraton D0243 E is used as a modifier of bitumen or thermoplastics and in compound formulations. It is also suitable as an ingredient in formulating compounds for footwear applications and may be used in formulating adhesives, sealants and coatings.

Kraton D1161 K is a clear, linear triblock copolymer based on styrene and isoprene, with a polystyrene content of 15%. It is supplied from North America in the physical form identified below. Kraton D1161 KU - supplied as undusted porous pellets Kraton D1161 KT - supplied as talcum dusted porous pellets Kraton D1161 KS - supplied as amorphous silica dusted porous pellets Kraton D1161 K is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen or thermoplastics and in compound formulations.

Kraton D1118 K is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied from North America in the physical form identified below. Kraton D1118 KT - supplied as a dusted porous pellet Kraton D1118 KTM - supplied as a dusted powder Kraton D1118 K is used as a modifier of bitumen or thermoplastics and in compound formulations. It may also find use as an ingredient in formulating adhesives, sealants and coatings.