Products in Infrastructure, Roads & Paving: Acrylics & Acrylates

Gatorfill is a blend of asphalt emulsion, high molecular weight acrylic polymer, graded rubber and fine ceramic aggregate designed to fill cracks on asphalt pavement surfaces.

Armor LV25 is a solvent-based high gloss acrylic cure and seal designed to enhance, seal, and protect concrete and paver surfaces. It will darken the surface and enhance any dull and faded coloring, and protect the surface with a durable high gloss surface film. Color packs are available and can be mixed in to provide an opaque-colored gloss finish. Non-slip additives are also available.

MPD Industries UVP 0206 99 is a Difunctional monomers, which polymerize when, expose to sources of free radicals. It is a low odor and good flexible monomer. It is compatible with a wide range of acrylated resins.

Super - Tiler™ is a Premium latex additive for enhancing thinset mortars A latex additive for enhancing Portland cement thinset mortars for interior or exterior installation of ceramic, porcelain, quarry, marble, pavers and other natural stone tiles on floors and walls. Super-Tiler can be diluted 50% with water to be used as a latex additive for grout. Increases Bond Strength and Flexibility, Interior & Exterior Use, Allows Thinsets to be Used Over Plywood Subfloors, Provides Thermal Shock Resistance to Freeze-Thaw Cycling, Exceeds ANSI A118.4.

MM-204 is a mono-functional acrylate monomer. It has low shrinkage and a high glass transition temperature upon cure. The secondary ester linkage is resistant to hydrolysis.

KARNAK 405 Bond-N-Shield is a 100% elastomeric acrylic, co-polymer emulsion, specifically designed as a base coating that will provide excellent adhesion to asphalt surfaces. The coating contains stain blockers that prevent asphalt bleed through thus producing a brighter white coating over these surfaces. Technological advances in the KARNAK laboratory also give this acrylic coating improved water blistering resistance in temporary ponding areas versus traditional acrylic coatings.

Tique Ground Coat is an elastomeric weather resistive air barrier, adhesive and base coat combined with Portland Cement. Tique Ground Coat is used in the Tique Continuous Insulation Systems, as well as in the direct applied application on vertical wall assemblies. It is a two component product.

TPA-696 is a Thermoplastic acrylic copolymers.

Davlin Coatings Capseal 800 Roofing Mastic Sealer is a specially formulated, highly flexible, acrylic modified waterborne emulsion used to seal asphalt on parapet walls, flashing, and repair details.

MPD Industries UVP 0201 99 is a Difunctional monomers, which polymerize when, expose to sources of free radicals. It is compatible with a wide range of acrylated resins. It is low odor and good flexible monomer.

AQUAFIN® 2K/M is a state-of the art, asbestos free, cementitious, acrylic emulsion based, flexible protective coating and waterproof barrier. This product is two-component (powder and liquid) and resistant to water and mild abrasion.

Lock 'N Seal is a one-step sealer and joint sand stabilizer. It is formulated from the latest developments in non-hazardous VOC, EPA and OSHA compliant, solvent free, water-based UV resistant acrylic chemistry designed specifically with high product solids to create the ultimate sealer for interlocking paver installations. It seals and locks down the sand within the paving joints with a flexible bond that reduces weed growth and ant mines.

CMC Klebetechnik CMC 12100 is a double-sided tape used for splicing. A green coating is applied to one side of the substrate.  Adhesive polysiloxane with a high initial tack. On the other hand, there is an acrylic adhesive that is still present.  provides good anchorage to low energy surfaces and will cure further after heat exposure.

Gold Reef Speciality Chemicals GR 1346 is polymer composed of a fine particle size pure acrylic copolymer emulsion.

Crystal Clear Stone Seal is a medium viscosity coating designed to seal dense floor surfaces such as flagstone, quarry tile, terrazzo, etc. where a low to medium sheen is desired. Fast drying and contains a minimum solids is 18%.

Hempel A/S Hempel's Polyenamel 55102 is a two-component, high-gloss acrylic polyurethane enamel cured with aliphatic isocyanate, with good gloss and color retention. Complies with EU Directive 2004/42/EC, The Paints Directive on the limitation of volatile organic compounds: subcategory j.

MACRI CHEMICALS RESIMAC A6M is a 50% thermoplastic acrylic resin in Xylene. Which is used for Traffic divider paints, protective membranes for prefabricated concrete, façade paints, transparent fixatives for old surfaces and impregnating agents for concrete.

Chemtek Products CF-620 is a acrylic striping paint recommended for striping that could be applied for parking lots, walkways, warehouse floors on both new and old concrete & asphalt surfaces. Dry's in 4 hours and is formulated without lead, chromate & is mercury free! Plus cf-620 has low voc's and is abrasion resistant and does dry's quick also.

Developed for high performance road marking paints. Due to its chemical backbone, it provides quick drying and also allows a good wash-out resistance

FORTSOLV 5940 is an acrylic copolymer.

Classic Quick Seal Wet Look is a clear, single component sealer that is designed to be used over all Classic Stains, polymer modified cement toppings, waterborne colorants, concrete, masonry, pavers, natural flagstone, and brick. Quick Seal is a waterborne acrylic with low VOC and high solids. May be used for interior or exterior applications in a wide range of climates.

AcrylaSeal is a cold applied, fuel resistant, high solids acrylic crack sealant. It is formulated to be fast setting and remain flexible over a wide range of temperatures. Recommended for asphalt and concrete surfaces.

UVP 0825 is tetrafunctional low viscosity acrylated polyester oligomer with low film shrinkage. It has a high cross link density which helps to enhance abrasion and solvent resistence.

Biolar LB-85p/60T is a solution of styrene copolymer and methacrylates in the toluene and intended for the production of road-marking paints with high wear and weather resistance.

UVP 0835 is hexafunctional acrylated polyester oligomer. It adds fastcure response, hardness and abrasion resistence to UV/EB curable inks coatings and adhesives.

T-PRO® 500 is an eco-safe, non-toxic, high performance polymer emulsion designed specifically for soil stabilization and dust suppression in a variety of soil types. T-PRO 500 is designed to increase surface hardness and bearing capacity as a wear course in unpaved road applications. It provides outstanding performance and cost effective maintenance of unpaved roads and surfaces in a range of applications from road construction to soil erosion and particulate emission control. T-PRO 500, when used in accordance with stated preparation and installation instructions, can be applied to a range of soil types and various climatic conditions. It is highly water resistant and when cured, remains stable under wet conditions without breakdown of the soil/polymer matrix or leaching of polymer product.

GHB® 4726GY consists of a foamed acrylic core that is coated on both sides with high performance acrylic adhesives. This adhesive provides excellent long term holding power The tape incorporates a strong closed cell foamed core that conforms to a wide variety of substrates providing a superior bond. GHB4726GY tapes are well suited for interior and exterior applications and in many instances can replace rivets, screws,welds and liquid adhesives. This tape will bond to most dry,clean,oil free surfaces and provide bond strengths along with dynamic shear that is significantly higher than typical pressure-sensitive tapes.

Solid Acrylic Resin PChem® BM65C is a copolymer of methyl methacrylate. It is a multi-usage thermoplastic acrylic resin with high purity, excellent weatherability, salt spray resistance, durability, and etc. BM65C is easily soluble in many organic solvents such as ketones, esters, aromatic hydrocarbons and chlorinated solvents. It has excellent compatibility with other film forming resins, such as cellulose, vinyl resins, and also plasticizer. The typical application of BM65C is tile paint, concrete sealant/hardener. BM65C is a cost-effective resin widely used in architecture anti-corrosive coatings, road marking and etc.

T307 - Floor Sealer Tough Armor Coating penetrates and levels porous surfaces such as concrete, marble, granite, and terrazzo prior to finishing.

UVP 0301 is an aliphatic trifunctional acrylate of low viscosity and excellent crosslinking reactivity. In comparison to other trifunctional acrylates, it is an effective reactive diluent with excellent solvency and viscosity reducing characteristics in UV/EB curable formulations based on epoxy,

MPD Industries UVP 0203 99 is a Difunctional monomers, which polymerize when, expose to sources of free radicals. It is a high boiling monomer with low vapor pressure.It is compatible with a wide range of acrylated resins.

Cipadeck® Paver & Concrete Sealer is a clear solvent based acrylic resin sealer for interlocking pavers and concrete. This sealer is available in gloss and anti-slip finishes that will not yellow on exterior exposure.

Classic Pro-Seal 2000 is a high gloss, low VOC, single component, high solids, solvent (acetone) base sealer that is designed to be used over our acid stain, water based stains, polymer modified cementitious toppings, concrete, waterborne colorants, masonry, stone, pavers, and brick. It may be used for exterior applications in a wide range of climates. Pro-Seal 2000 Wet Look has excellent UV stability and will not yellow.

Acrylamac® 231-1195 is a solution acrylic polymer designed for formulation of low odor specialty primers. Manufactured in North America.

GHB® 6626CL consists of a foamed acrylic core that is coated on both sides with high performance acrylic adhesives. This adhesive provides excellent long term holding power The tape incorporates a strong closed cell foamed core that conforms to a wide variety of substrates providing a superior bond. GHB6626CL tapes are well suited for interior and exterior applications and in many instances can replace rivets, screws,welds and liquid adhesives. This tape will bond to most dry,clean,oil free surfaces and provide bond strengths along with dynamic shear that is significantly higher than typical pressure-sensitive tapes.

IZELCRYL AQ 30 BG 46 is used for water based varnish, filler, primer and topcoat paints for wood and metal surfaces. It is very fast air drying, has good hardness and good adhesion. It has high yellowing resistance. It is suitable for Low Volatile Organic Compounds (LVOC) systems.