Products in Infrastructure, Roads & Paving: Binder

VINNAPAS® 530 ND is a construction dispersion for primers, cement admixes, and repair mortars. VINNAPAS® 530 ND is based on a vinyl acetate/ethylene copolymer. It reduces the elastic modulus and enhances adhesion. VINNAPAS® 530 ND is an unplasticized 55% dispersion of a vinyl acetate/ethylene copolymer in water.

ETONIS® 5150 P is a ready-to-use polymer dispersion specifically designed for special concrete applications. It is particularly well-suited for modifying concrete, especially in shotcrete applications for underground construction, tunneling, and mining. The primary applications of ETONIS® 5150 P include concrete protection and concrete repair.

ETONIS® 7445 A is a rapid-setting vinyl acetate-ethylene copolymer with unique properties. Unlike a high-solids version of the ETONIS® series dispersion, it is specially formulated to provide excellent adhesion and cohesion to challenging substrates such as aggregate, base and sub-base material, and asphalt emulsion. Its superior bonding capabilities make it an ideal choice for various applications.

VINNAPAS® 4016 N is a hard dispersible polymer powder based on vinyl acetate and ethylene with very good tensile adhesion strength on inorganic surfaces combined with good workability. VINNAPAS® 4016 N was developed for those applications where lower water demand and increased smoothness under the trowel are important.

ETONIS® 7145 A is a surfactant stabilized vinyl acetate-ethylene copolymer dispersion designed for cold asphalt applications. It has a glass transition temperature (Tg) of 0 °C, providing optimal performance in low-temperature environments. ETONIS® 7145 A offers outstanding film flexibility, wet track abrasion resistance, and superior adhesion properties, making it a reliable choice for cold asphalt formulations.

ETONIS® 7550 A is a versatile dispersible polymer powder designed for various concrete applications, including pervious concrete, concrete repair, cement admixtures, renders, and plasters. It is formulated with a hard copolymer of vinyl acetate and ethylene, categorized under the ETONIS® A product class. This polymer powder has a neutral effect on rheology and offers essential properties such as adhesion and flexibility, allowing for greater formulation flexibility. ETONIS® 7550 A is a standard product in our range, providing a superior solution for a wide range of applications.

ETONIS® 7245 A is a vinyl acetate-ethylene copolymer dispersion stabilized with poly(vinyl alcohol). It has a glass transition temperature (Tg) of +23 °C and is specifically designed for asphalt emulsion-based applications. ETONIS® 7245 A offers exceptional adhesion, abrasion resistance, tensile strength, film flexibility, and shorter drying time.

VINNAPAS® 825 ED is an all-round construction dispersion for two-component dry mix mortars, specifically suited for cement admixtures and two-component cementitious self-leveling compounds. It is based on a semi-flexible terpolymer of vinyl acetate, ethylene, and vinyl chloride and belongs to the product class VINNAPAS® ED, enhancing the adhesion and mechanical strength of mortars.

ETONIS® 5500 P is a versatile dispersible polymer powder designed for concrete and mortar applications, especially suitable for concrete repair mortars, cement admixtures, renders, and plasters. It is formulated with a hard copolymer of vinyl acetate and ethylene, belonging to the ETONIS® P product class. This polymer powder has a neutral effect on rheology and provides essential properties such as adhesion and flexibility, allowing for greater formulation flexibility. ETONIS® 5500 P is a standard offering in our product range, providing a top-quality solution for a wide range of applications.

ETONIS® 7850 A is a versatile dispersible polymer powder designed for various concrete applications, including shotcrete, concrete repair, cement admixtures, renders, and plasters. It is formulated with a soft copolymer of vinyl acetate and ethylene, categorized under the ETONIS® A product class. This polymer powder has a neutral effect on rheology and offers essential properties such as adhesion and flexibility, providing a high level of formulation freedom. ETONIS® 7850 A is a standard product in our range, offering the best-in-class solution for a wide range of applications.

ETONIS® 7142 A is a dispersion of vinyl acetate-ethylene copolymer. It possesses a glass transition temperature (Tg) of -15 °C and is specifically designed for use in asphalt emulsion-based applications. This product enhances various properties such as film flexibility, adhesion, and drying time. ETONIS® 7142 A is suitable for modifying both anionic and cationic asphalt emulsions, offering advantages like rapid setting speeds, easy machining, and effortless clean-up.

Flyprene SBS 792 is a clear, linear triblock copolymer based on styrene and butadiene, with a polystyrene content of 40% (wt.%). It is used in asphalt modification, and as a waterproofing material. This product may also find use as a modifier for polymers and adhesives.

Flyprene SBS 791 is a clear, linear triblock copolymer based on styrene and butadiene, with a polystyrene content of 30% (wt.%). It is used in asphalt modification, and as a waterproofing material. This product may also find use as a modifier for polymers and adhesives.

Flyprene SBS 791H is a clear, linear triblock copolymer based on styrene and butadiene, with a polystyrene content of 30% (wt.%). It is used in asphalt modification, and as a waterproofing material. This product may also find use as a modifier for polymers and adhesives.

Texicryl® 13-620 is an APEO free pure acrylic copolymer emulsion designed for use in the building and construction industry. The polymer offers improved adhesion to various substrates and superior elasticity to relevant mixtures. It is designed for use in flexible mineral sealings, crack-bridging systems, waterproof coatings, fillers, putties, polymer-modified cement and mortar based mixtures of all kinds.

DYTEK® BHMT HP (bis-hexamethylene triamine) is a high purity (>95%) triamine that is used in applications where purity is critical such as phosphonate scavenger and flocculant in oil & gas applications and as a hardener in epoxy coating and adhesive applications.

DYTEK® BHMT (bis-hexamethylene triamine) is a long chain triamine that is used as a binder in asphalt, as a phosphonate scavenger and flocculant in oil & gas applications, and as a hardener in epoxy coating and adhesive applications.

Solprene 411 is a 70/30 butadiene/styrene thermoplastic copolymer, polymerized in solution and has a radial structure.This product is available in: - Solprene 411 Porous crumb. - Solprene 411C Porous pellet. - Solprene 411M Powder form dusted with calcium carbonate.

Solprene 4318 is a linear block copolymer of styrene and butadiene, having 32% of styrene content, most of it forming a polystyrene block, which gives the polymer a thermoplastic behavior.It has a non-staining antioxidant system; FDA approved for use in food contact applications and is essentially gel free with a clear color.Solprene 4318 is used as compounding ingredient for adhesives. The product is an excellent modifier for asphalt applications including self-adhesive roofing membrane and sealant. Also is used in thermoplastic injected shoe soles formulations.

LESTAC DP100 is brown to dark brown color thermoplastic granular or flake resin obtained from mainly thermal polymerizing unsaturated aromatic and indene derived from the process of thermal cracking of naphtha. The major usages are Paint, Printing Ink, Rubber Compound and Tire. This grade also can be use as water repellent agent, concrete curing agent and binder for asphalt.

Zeocem KlinoLime is a mixed binder. This product is intended for improvement, consolidation and stabilization of ground surfaces. Zeolite in combination with lime, portland clinker, gypsum and ground granulated slag creates a mixed binder. It is used to strengthen ground surfaces.

LESTAC DCPD100 is pale yellow granular or flake thermoplastic resin obtained from mainly thermo polymerizing unsaturated DCPD derived from the process of thermal cracking of naphtha. The major usages are Adhesive such as pressure-sensitive adhesive, hot-melt adhesive, Coating, Paint, Printing Ink, Rubber Compound and Tire. This grade also can be use as water repellent agent, concrete curing agent and binder for asphalt.

LESTAC P140 is from light color to pale yellow color, catalysis or thermo-polymerization process,thermoplastic resin, obtained from mainly thermal polymerizing unsaturated aromatic and indene derived from the process of thermal cracking of naphtha. It's characterized by low molecular wight, a high level of compatibility and excellent resistance to acids, alkali and moisture, so the major usages are Paint, Printing Ink, Rubber Compound and Tire. This grade also can be use as tackifier in hot-melt adhesive, water repellent agent, concrete curing agent and binder for asphalt.

Novotrade Invest AS HCR-125AN are made by thermal polymerization of mixed aliphatic and aromatic hydrocarbon fraction C5/C9. It’s a solid polymer, fractional composition up to 3 mm. This resins made for the better solubility in aliphatic nature solvents. Also resins have good compatibility with different co-polymers like SBS and EVA good adhesive properties and tackifying characteristics.

Novotrade Invest AS HCR- 95V is a solid polymer, fractional composition up to 3 mm. It is soluble in most industrial aromatic solvents and particularly in aliphatic ones and has a wide compatibility with different co-polymers like SBS and EVA. It is also has good adhesive properties, tackifying characteristics and heat stability.

DRB 435 is a purified CL-based product used in a wide variety of organic and inorganic industrial binding applications including the agglomeration of limestone, coal, ceramics, and fertilizer, dust control of unpaved roads and stockpiles, and as a low-cost dispersant of various substrates including gypsum and concrete.

Novotrade Invest AS HCR-115A is a solid polymer with fractional composition up to 3 mm.It is soluble in most industrial aromatic solvents and particularly in aliphatic ones and has a wide compatibility with different co-polymers like SBS and EVA. It also has a good adhesive properties, tackifying characteristics and heat stability.

Solprene 416 is a radial styrene/butadiene block copolymer having 30% of styrene content, most of it forming a polystyrenes block which gives the polymer a thermoplastic behavior. It develops properties of vulcanized rubber yet not requiring vulcanization.It is protected with a non staining antioxidant system; FDA approved, suitable for food contact applications and is essentially gel free with a clear color.Solprene 416 is used as elastomeric modifier for asphalt and plastics, as ingredient of soling formulations and as base for pressure sensitive adhesives.

Razeen® LR 2254 is a low viscosity epoxy resin based on bisphenol A and modified with an aliphatic monoglycidyl ether.

Novotrade Invest AS HCR-105AN are made by thermal polymerization of mixed aliphatic and aromatic hydrocarbon fraction C5/C9. It’s a solid polymer, fractional composition up to 3 mm. This resins made for the better solubility in aliphatic nature solvents. Also resins have good compatibility with different co-polymers like SBS and EVA good adhesive properties and tackifying characteristics.

Novotrade Invest AS HCR-135AN are made by thermal polymerization of mixed aliphatic and aromatic hydrocarbon fraction C5/C9. It’s a solid polymer, fractional composition up to 3 mm. This resins made for the better solubility in aliphatic nature solvents. Also resins have good compatibility with different co-polymers like SBS and EVA good adhesive properties and tackifying characteristics.

LESTAC P110 is from light color to pale yellow color, catalysis or thermo-polymerization process,thermoplastic resin, obtained from mainly thermal polymerizing unsaturated aromatic and indene derived from the process of thermal cracking of naphtha. It's characterized by low molecular wight, a high level of compatibility and excellent resistance to acids, alkali and moisture, so the major usages are Paint, Printing Ink, Rubber Compound and Tire. This grade also can be use as tackifier in hot-melt adhesive, water repellent agent, concrete curing agent and binder for asphalt.

Novotrade Invest AS HCR- 95AN are made by thermal polymerization of mixed aliphatic and aromatic hydrocarbon fraction C5/C9. It’s a solid polymer, fractional composition up to 3 mm. This resins made for the better solubility in aliphatic nature solvents. Also resins have good compatibility with different co-polymers like SBS and EVA good adhesive properties and tackifying characteristics.

Novotrade Invest AS HCR-105V is a solid polymer, fractional composition up to 3 mm. It is soluble in most industrial aromatic solvents and particularly in aliphatic ones and has a wide compatibility with different co-polymers like SBS and EVA. It is also has good adhesive properties, tackifying characteristics and heat stability.

LESTAC DP110 is brown to dark brown color thermoplastic granule or flake resin obtained from mainly thermal polymerizing unsaturated aromatic and indene derived from the process of thermal cracking of naphtha. The major usages are Paint, Printing Ink, Rubber Compound and Tire. This grade also can be use as water repellent agent, concrete curing agent and binder for asphalt.

Novotrade Invest AS HCR-115V is a solid polymer, fractional composition up to 3 mm. It is soluble in most industrial aromatic solvents and particularly in aliphatic ones and has a wide compatibility with different co-polymers like SBS and EVA. It is also has good adhesive properties, tackifying characteristics and heat stability.