Products in Pavement, Highways, Roads & Bridges: Dimensional Stability

LITHOS Talc LPP is highly lamellar, very soft talc with good aspect ratio. This is realized by a specific delaminating process, which creates best lamellar structure instead of breaking the plates in smaller parts. Products with a top cut to 10 microns and respectively median particle sizes of 2 microns are realised.

LITHOS Talc LPP is highly lamellar, very soft talc with good aspect ratio. This is realized by a specific delaminating process, which creates best lamellar structure instead of breaking the plates in smaller parts. Products with a top cut to 10 microns and respectively median particle sizes of 2 microns are realised.

LITHOS Talc LP is a highly lamellar, very soft talc with a huge aspect ratio. This is realized by a specific delaminating process which creates the optimal lamellar structure without breaking the plates in smaller parts. Furthermore it is equipped with extraordinary whiteness and thereby suitable for applications of the highest quality, in plastic, paper and the coating industry.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, Compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

LITHOS Talc LP is a highly lamellar, very soft talc with a huge aspect ratio. This is realized by a specific delaminating process which creates the optimal lamellar structure without breaking the plates in smaller parts. Furthermore it is equipped with extraordinary whiteness and thereby suitable for applications of the highest quality, in plastic, paper and the coating industry.

LITHOS Talc LP is a highly lamellar, very soft talc with a huge aspect ratio. This is realized by a specific delaminating process which creates the optimal lamellar structure without breaking the plates in smaller parts. Furthermore it is equipped with extraordinary whiteness and thereby suitable for applications of the highest quality, in plastic, paper and the coating industry.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

LITHOS Talc LPP is highly lamellar, very soft talc with good aspect ratio. This is realized by a specific delaminating process, which creates best lamellar structure instead of breaking the plates in smaller parts. Products with a top cut to 10 microns and respectively median particle sizes of 2 microns are realised.

LITHOS Talc LPP is highly lamellar, very soft talc with good aspect ratio. This is realized by a specific delaminating process, which creates best lamellar structure instead of breaking the plates in smaller parts. Products with a top cut to 10 microns and respectively median particle sizes of 2 microns are realised.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

LITHOS Talc LP is a highly lamellar, very soft talc with a huge aspect ratio. This is realized by a specific delaminating process which creates the optimal lamellar structure without breaking the plates in smaller parts. Furthermore it is equipped with extraordinary whiteness and thereby suitable for applications of the highest quality, in plastic, paper and the coating industry.

LITHOS Talc LP is a highly lamellar, very soft talc with a huge aspect ratio. This is realized by a specific delaminating process which creates the optimal lamellar structure without breaking the plates in smaller parts. Furthermore it is equipped with extraordinary whiteness and thereby suitable for applications of the highest quality, in plastic, paper and the coating industry.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

LITHOS Talc LPP is highly lamellar, very soft talc with good aspect ratio. This is realized by a specific delaminating process, which creates best lamellar structure instead of breaking the plates in smaller parts. Products with a top cut to 10 microns and respectively median particle sizes of 2 microns are realised.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

LITHOS Talc LP is a highly lamellar, very soft talc with a huge aspect ratio. This is realized by a specific delaminating process which creates the optimal lamellar structure without breaking the plates in smaller parts. Furthermore it is equipped with extraordinary whiteness and thereby suitable for applications of the highest quality, in plastic, paper and the coating industry.

LITHOS Talc LP is a highly lamellar, very soft talc with a huge aspect ratio. This is realized by a specific delaminating process which creates the optimal lamellar structure without breaking the plates in smaller parts. Furthermore it is equipped with extraordinary whiteness and thereby suitable for applications of the highest quality, in plastic, paper and the coating industry.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

LITHOS Talc LPP is highly lamellar, very soft talc with good aspect ratio. This is realized by a specific delaminating process, which creates best lamellar structure instead of breaking the plates in smaller parts. Products with a top cut to 10 microns and respectively median particle sizes of 2 microns are realised.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

LITHOS Talc LP is a highly lamellar, very soft talc with a huge aspect ratio. This is realized by a specific delaminating process which creates the optimal lamellar structure without breaking the plates in smaller parts. Furthermore it is equipped with extraordinary whiteness and thereby suitable for applications of the highest quality, in plastic, paper and the coating industry.

LITHOS Talc LP is a highly lamellar, very soft talc with a huge aspect ratio. This is realized by a specific delaminating process which creates the optimal lamellar structure without breaking the plates in smaller parts. Furthermore it is equipped with extraordinary whiteness and thereby suitable for applications of the highest quality, in plastic, paper and the coating industry.

LITHOS Talc LP is a highly lamellar, very soft talc with a huge aspect ratio. This is realized by a specific delaminating process which creates the optimal lamellar structure without breaking the plates in smaller parts. Furthermore it is equipped with extraordinary whiteness and thereby suitable for applications of the highest quality, in plastic, paper and the coating industry.

ACM C400X is Multiaxial Carbon Fabrics with Standard fabric width of1270 mm having EP/VE Resin compatibility Multiaxial fabrics are textile materials made of several layers of high-strength composite fibers stitched together with thin threads. Multiaxial fabric can be carbon, glass, basalt, and hybrid according to the source fibers.

ACM С400Т/P is a Balanced Woven Fabric with Standard fabric width of 1250 mm and Custom width range of 300—1600 mm having EP/VE Resin compatibility.

Stypol® APVJ4001 - polyvinyl acetate low profile additive. For use in SMC, BMC, and pultusion. Class A surface and dimensional stability. Main applications areas are building and construction, home and domestic applications, industrial sector etc.

TG-18-P is a E-Glass Fiber (Originally known as Electical glass). The most economical and commonly used fiber in the reinforced polymer composite industry with variety of sizes (finish) depending on the resin system process application.

ACM C130P is a Unidirectional Woven Fabrics with Standard fabric width of 300 mm and Custom width range of 120—1600 mm having EP/VE Resin compatibility. Unidirectional carbon tapes are carbon fabric with at least 85% of the filaments arranged in the same direction. Thin glass, aramid, or hot melt fibers are used as weft (cross fibers). This structure supports the high tensile strength of the carbon tape and makes it a relevant material in demand for construction and many other applications.