Products in Other Building & Construction Applications: Chemical Res...

Solfre 1 is a one component solvent free polyurethane adhesive suitable for a range of applications. Its unique formulation provides superior resistance to chemicals, heat, humidity and thermal shock making it ideally suited for construction, composite panels, truck building, motor home panels, wall cladding and many other industries where a structural permanent bond is required.

ChemSystems Helix Epoxy Primer is a two component, water-based epoxy primer designed as an adhesion promoter between Helix polymer coatings, cement based overlays, and hard surface substrates. Helix Epoxy Primer acts as a thin build primer, at the same time penetrating the surface of the substrate to provide excellent adhesion.

ChemSystems Silane 40 SB VX is a solvent-based, breathable, deep-penetrating, water repellent for concrete, masonry, and block. It protects by eliminating water intrusion which keeps harmful chemicals like deicing salts from entering the slab. Keeping water from entering the material also reduces issues related to freeze/thaw cycles and keeps rebar rust free.

Onyx Concrete Coatings Polyurethane WB Matte is a two-component, low-VOC premium aliphatic water-based polyurethane. This latest generation polyurethane system provides excellent UV resistance with a matte finish and no solvent odor. This system boasts easy installation, long pot life, as well as great abrasion and chemical resistance and is suitable for both indoor and outdoor uses. Polyurethane WB is also available in a gloss finish.

HercuLean HercuLean™ H140 25mm can be used as a stand-alone structural foam or as a core material for laminates to provide high-strength structure in a variety of applications. Nomaco has the capability to provide extruded profiles, planks, and sheet stock in multiple thicknesses and densities, designed to performance specifications required. Nomaco can produce large, one-piece sheet stock with fabrication equipment for cut-to-size needs, providing our customers with a vast scope of design possibilities.

HercuLean HercuLean™ H80 19mm can be used as a stand-alone structural foam or as a core material for laminates to provide high-strength structure in a variety of applications. Nomaco has the capability to provide extruded profiles, planks, and sheet stock in multiple thicknesses and densities, designed to performance specifications required. Nomaco can produce large, one-piece sheet stock with fabrication equipment for cut-to-size needs, providing our customers with a vast scope of design possibilities.

Onyx Concrete Coatings Polyflex 900 is an advanced high performance, 100% solids aliphatic, polyurethane membrane. It’s a flexible twocomponent overlayment and ideally suited for outdoor applications and is generally applied at 30-125 mils nominal thickness with an anti-slip finish. Its flexibility makes it ideal for bridging cracks that would cause cracking in epoxy systems. It has good chemical resistance and it has been formulated for the harshest application demands. PolyFlex 900 is available in gray only.

ASTC 1006 Polyurea Spray is a two component, high wet-out, long open time, aromatic MDI or TDI prepolymer and multifunctional polyurea amine blend. The polymer system is "pure polyurea" and is not modified using urethane or other additives.

ACCU-GROUT products are three-component, pre-proportioned, industrial grade epoxy grouting systems. ACCU-GROUT LE is a low exotherm, high strength construction epoxy. The recommended application temperature range for the grout products is between 60°F - 95°F (16°C - 35°C).

Crown Foam Technologies Medium Density Vinyl Foam 10#-14# is the perfect solution for the more challenging environment that partners flexibility and wear-resistance. CVM114 is available in duel density, multi layered colored logs.

HercuLean HercuLean™ H220 19mm can be used as a stand-alone structural foam or as a core material for laminates to provide high-strength structure in a variety of applications. Nomaco has the capability to provide extruded profiles, planks, and sheet stock in multiple thicknesses and densities, designed to performance specifications required. Nomaco can produce large, one-piece sheet stock with fabrication equipment for cut-to-size needs, providing our customers with a vast scope of design possibilities.

Onyx Concrete Coatings Polyurethane WB Gloss is a two-component, Low-VOC premium aliphatic water-based polyurethane. This latest generation polyurethane system provides excellent UV resistance with a gloss finish and no solvent odor. This system boasts easy installation, long pot life, as well as great abrasion and chemical resistance and is suitable for both indoor and outdoor uses. Polyurethane WB is also available in a matte finish.

Onyx Concrete Coatings Polyaspartic 90 is a two component, high solids, aliphatic polyaspartic finish floor coating, formulated to give the highest solids content with the lowest viscosity 90% solids and 0-V.O.C. Polyaspartic 90 provides a high gloss finish and is the product of choice for a high build interior/ exterior top coat. It is designed to be applied at 5-20 mils (DFT), for durability, stain resistance, and a finish coat which beautifies concrete for years simply unmatched. It is also formulated to be used with virtually all other Onyx base systems.

Microcare VDX Dry Lubricant Spray is a medical-grade Polytetrafluoroethylene (PTFE) micro dispersion lubricant. This spray-applied lubricant dispenses in a precise spray pattern ideal for spot lubrication of springs, hinges, and mechanical pinch points in medical device assemblies. VDX provides a low cost, non-migrating inert coating that imparts ultra-low friction surfaces and eliminates sticking problems common in low-speed, light-load mechanical assemblies.

Armor Plate 999 High-Strength Epoxy Grout is a high strength, thermosetting, epoxy grout system. AP 999 is a packaged, premeasured, three-component system of epoxy resin, epoxy catalyst, and inert aggregate. This laboratory tested mixture produces a foundation grout with homogenous aggregate distribution. The rapid high strength and chemical resistance of the AP 999 grout provides an equipment foundation which is long-lasting, economical and maintenance free. Because of its quick cure time, AP 999 is excellent for areas where equipment must be placed in service with a short downtime. It has been used to grout all the equipment at the Prudhoe Bay, Alaska, North Slope Operations. AP 999 is used to pace equipment such as compressors, pumps, centrifuges, turbines, generators, kilns, steam engines diesel engines, milling machines, blowers and presses.

Minchem Epitek Mortar is a high-performance epoxy-based acid and abrasion-resistant material designed to provide chemical resistance to aggressive chemical environments. They are typically provided in a two-component format comprising, an epoxy solution and an epoxy-based hardener, with the option of an inert filler powder with varying granulometry to suit the required thickness and application.

Decoplast® Acryl DP 600 is an acrylic polymer emulsion which enhances the adhesion, workability, physical properties such as compressive and flexural strength, and durability of Portland cement mortars, plaster, stucco, and concrete mixes.

Hydrasheen is a non-yellowing, water-based compound containing acrylic polymers that offers outstanding curing, sealing, dustproofing, increased abrasion and chemical resistance for freshly finished concrete surfaces. On older concrete surfaces Hydrasheen will simultaneously seal and dustproof while extending service life and minimizing maintenance costs. Hydrasheen has been formulated to form a membrane film on the surface of the concrete optimizing water retention for maximum concrete hydration and compressive strength development. Hydrasheen will appear milky white in the container and dries to a clear film.

Cling Foam® C800 Cling Foam offers a choice of materials depending upon the requirements of the application. The C800 Series is low density closed-cell Polyvinyl Chloride foam with the unique ability to bond to non-porous surfaces without an adhesive.It comes on a special "high gloss" paper to protect the cling surface. "Cling Foam " leaves no residue when removed. C810 is the same low density product; coated on the opposite laminating side with a pressure-sensitive adhesive.

Midwest Industrial Products Corporation Deep Mix Grout 141 is a 100% solids 3 component epoxy mortar that has a very high loading of super hard, dense Aggregates. It is extremely strong and can stand up to grinding steel wheel traffic and brutal impact. It has outstanding chemical resistance and can be used in highly corrosive areas.

SCIGRIP® SG230HV is a two-component, 10:1 mix ratio product for bonding composite and other plastic parts with little to no surface preparation1,2. The adhesive is designed to work with a selection of activators to provide a wide range of working times from 30 to 120 minutes. SG230 HV is mostly used in marine, transportation and construction applications. It is especially suited for bonding large structural parts requiring long working times and for filling deep irregular gaps up to 1.5 inches (39 mm). SG230 HV is available in 490 ml cartridges and 5 and 50 gallon (19 and 189 liters) in bulk containers for application with meter-mix dispense equipment. The combination of SG230 HV A with SG220 B activator is recommended only for use above 85°F (29°C) ambient temperature.

Minchem Epitek Screed is a high-performance epoxy-based acid and abrasion-resistant material designed to provide chemical resistance to aggressive chemical environments. They are typically provided in a two-component format comprising, an epoxy solution and an epoxy-based hardener, with the option of an inert filler powder with varying granulometry to suit the required thickness and application.

Onyx Concrete Coatings Polyaspartic 100 is a two component, high performance aliphatic polyaspartic finish floor coating. It is 100% solids and 0-V.O.C. The absence of solvents and almost no odor allows it to be applied in occupied areas. Polyaspartic 100 provides a high gloss finish and is the product of choice for a high build interior/ exterior top coat. It is designed to be applied at 5-20 mils (DFT). For durability, stain resistance, and a finish coat which beautifies concrete for years, Polyaspartic 100 is simply unmatched. It is also formulated to be used with virtually all other Onyx base systems.

Minchem VE60 is a high-performance vinyl ester-based acid-resistant material designed to provide maximum resistance to aggressive chemical environments. It is typically provided in a two-component format comprising, a vinyl ester solution and a catalyzed filler powder, which can be altered, with varying granulometry to suit the required thickness and application.

Arabian Chemical Industries ISOBOND Xtra is a liquid latex admixture formulated to enhance properties of cementitious system. Mortars modified withISOBOND Xtra gives better adhesion, water and chemical resistance, high mechanical strength and shock resistance. It is resistant to hydrolysis and suitable for internal or external applications.

Coating & Binding Technology EMG‐15 / 3K Epoxy Grout is a three component, 100% solids, solvent‐free system formulated to provide high‐strength and superior creep resistance combined with the highest effective bearing area. EMG‐15 provides precise alignment, high impact resistance, and oil and chemical resistance to dynamic load equipment foundation applications. Coating & Binding Technology's Epoxy Machine Grout is a low exothermic epoxy system for machinery grouting.

Onyx Concrete Coatings Epoxy Flex (Top Coat) is a flexible two component, high performance, cycloaliphatic, 100% solids, urethane modified epoxy overlayment and coating system. Its epoxy chemistry provides excellent bonding characteristics with the additional advantage of flexibility.

ACCU-GROUT products are three-component, pre-proportioned, industrial grade epoxy grouting systems. ACCU-GROUT is a general construction epoxy. The recommended application temperature range for the grout products is between 60°F - 95°F (16°C - 35°C).

Krete100® is an admixture to the concrete mixes to provide highest structural density of the matrix of cement rock with thickness of cementitious coatings from 8 mm to 35 mm or from 1/3” to 1 ¼”. Krete100® admixture is a development of KALMATRON® KF-A with enforced ability to hydrate cement with minimal amount of water. As it shown on “1”, the mesh size of OPC Krete100 is at 6 µmm to 9 µmm with lowest exothermic emission.

HercuLean HercuLean™ H140 14mm can be used as a stand-alone structural foam or as a core material for laminates to provide high-strength structure in a variety of applications. Nomaco has the capability to provide extruded profiles, planks, and sheet stock in multiple thicknesses and densities, designed to performance specifications required. Nomaco can produce large, one-piece sheet stock with fabrication equipment for cut-to-size needs, providing our customers with a vast scope of design possibilities.

Arabian Chemical Industries ISOBOND is a liquid latex admixture based on styrene butadiene rubber that is designed as an integral adhesivefor cementitious system. Mortars and concrete prepared from ISOBOND has excellent adhesion properties, chemical resistant, high strength, and waterproof. It has excellent resistance to hydrolysis (unlike PVA-based bonding system) and will perform very well under humid conditions and other applications subject to continuous and/ or alternate wettingand drying.

HercuLean HercuLean™ H220 14mm can be used as a stand-alone structural foam or as a core material for laminates to provide high-strength structure in a variety of applications. Nomaco has the capability to provide extruded profiles, planks, and sheet stock in multiple thicknesses and densities, designed to performance specifications required. Nomaco can produce large, one-piece sheet stock with fabrication equipment for cut-to-size needs, providing our customers with a vast scope of design possibilities.

Armor Plate 999MP Multi-Purpose Epoxy Grout is a three-component, high strength, 100% solids, epoxy grouting compound. It is primarily used to grout large machinery, support sole plates and rehabilitate concrete structures. Armor Plate 999MP exhibits early compressive strength, negligible shrinkage and is resistant to mechanical abuse and corrosive attack. Armor Plate 999MP is an ideal grouting material for use in these and other applications:; Equipment grouting for pumps and compressors Anchor bolt and rebar grouting Repairing spalled concrete Rebuilding concrete curbs Repairing concrete columns and concrete bases Deep pour applications to 12 inches.

SCIGRIP® SG7706 B is a two-part methacrylate, structural rodding and clip bonding adhesive designed for the structural bonding of sink clips, steel and fiberglass rodding materials, and steel and aluminum to solid surface (acrylic and polyester), engineered stone, quartz surfaces, and natural stone products. Combined at a ratio of 1:1, SG7706 has a working time of 4 to 8 minutes and achieves nearly 90 percent of its ultimate strength in 10 to 15 minutes at room temperature curing. SG7706 provides high strength bonds to acrylic solid surface, polyester solid surface (both filled and unfilled), and solid surface (combinations of both acrylic and polyester solid surface resins) and the steel clips, rods, fiberglass and other materials. SG7706 has high strength bonds to carbon steel, stainless steel, and aluminum alloys. SG7706 is not UV stable, and will yellow over time and must not be used to create imperceptible seams in countertops. However, this yellowing will not affect bond performance, but will affect bond appearance. SG7706 is available in 50 ml and 400 ml cartridges.

Onyx Concrete Coatings Polyaspartic 100-C is a two component, high performance aliphatic polyaspartic finish floor coating. It is 100% solids and 0-V.O.C. The absence of solvents and almost no odor allows it to be applied in occupied areas. It provides a high gloss finish and is the product of choice for a high build interior/ exterior top coat. It is designed to be applied at 5-20 mils (DFT)and is uniquely suited for cold applications. For durability, stain resistance, and a finish coat which beautifies concrete for years, Polyaspartic 100-C is simply unmatched. It is also formulated to be used wih virtually all other Onyx base systems.

Hydrasheen 30% is a non-yellowing, water-based compound containing acrylic polymers that offers outstanding curing, sealing, dustproofing, increased abrasion and chemical resistance for freshly finished concrete surfaces. On older concrete surfaces Hydrasheen 30% will simultaneously seal and dustproof while extending service life and minimizing maintenance costs. Hydrasheen 30% has been formulated to form a membrane film on the surface of the concrete optimizing water retention for maximum concrete hydration and compressive strength development. Hydrasheen 30% will appear milky white in the container and dries to a clear film.