Products in Other Building & Construction Applications: High Strength

CAROBOND 33 W is a high alumina, chemically bonded, wet mortar. It has excellent strength and resistance to molten metal and slags. As a heat setting mortar it is used for laying high alumina brick where service conditions are severe.

Formula 3000 is a high-strength structural adhesive that is intended to form strong permanent bonds to ceramic tile, steel, aluminum, and other substrates. The plural component system makes it simple to mix equal parts by weight or volume. Hudco Formula 3000 Resin and Hardener are made in contrasting colored thixotropic pastes that the user can easily monitor while blending into the final color. Its buttery viscosity has high "tack" properties that instantly wet substrates and keep HUDCO Formula 3000 in place during application.

US SPEC GP Grout is a blend of portland cement, special admixtures and proprietary aggregates designed to provide high flexural and compressive strength performance from plastic to fluid consistencies. GP Grout is non-metallic, non-shrink, non-corrosive and contains no added chlorides.

Detroit Body Filler 72225 is a isophthalic, fiberglass reinforced, polyester adhesive. This material should be used where a bonding putty is required. It can also be used to radius, fill or for fairing. 72225 spreads and feathers smoothly.

JE Tomes CTS Construction Grout is versatile, high strength, non shrink grout that can be mixed at any consistency ranging from damp pack to fluid. Portland Cement-based for long-term durability in structural and non-structural work.

THERMOSEAL® m22 non-wetting moldable is comprised of bulk refractory fibers that form a pumpable putty excellent for use as a high temperature binder and filler system. This moldable is particularly good for use as sealing, coating and patching material for furnaces and troughs. Resistant to the attack of molten metal alloys, these moldable are also unaffected by thermal shock and have very low heat transfer and thermal conductivity. In addition, THERMOSEAL®® m22 non-wetting moldable has excellent insulation properties, high strength, and very low shrinkage.

Armor Plate 999 High-Strength Epoxy Grout is a high strength, thermosetting, epoxy grout system. AP 999 is a packaged, premeasured, three-component system of epoxy resin, epoxy catalyst, and inert aggregate. This laboratory tested mixture produces a foundation grout with homogenous aggregate distribution. The rapid high strength and chemical resistance of the AP 999 grout provides an equipment foundation which is long-lasting, economical and maintenance free. Because of its quick cure time, AP 999 is excellent for areas where equipment must be placed in service with a short downtime. It has been used to grout all the equipment at the Prudhoe Bay, Alaska, North Slope Operations. AP 999 is used to pace equipment such as compressors, pumps, centrifuges, turbines, generators, kilns, steam engines diesel engines, milling machines, blowers and presses.

Anti-Hydro ® -NCR 1-1C is highly recommended for integral concrete waterproofing. Over many decades, it has been successfully used in all types of structures to waterproof concrete and improve its workability, strength, hardness, and durability. Foundations, elevator pits, sewage and water treatment plants, seawall construction, tunnels, tanks, tilt-ups, pavements, slabs-on-grade, exposed concrete, underground utility constructions, and so on are examples of installations.

Polygem Sinmast 4 Rapid is a fast-setting, fast-curing industrial epoxy formulated for concrete patching and repair. Mix Polygem Sinmast 4 Rapid with sand or aggregates to make epoxy grouts. Polygem Sinmast 4 Rapid is also an excellent choice for fiberglass lay up and laminating applications. Polygem Sinmast 4 Rapid does not contain solvents or toxic styrenes.

Rapid Set® Cement All Grout has the characteristics of a high-quality repair material that is used for rapid strength, long-term durability, and low shrinkage. Sets up in 15 minutes and is ready for light traffic in 1 hour.

Hypel-D is a polymeric multi-component strength enhancing liquid water-repellant and efflorescence control admixture that is designed to enhance the beauty of manufactured concrete products while making them stronger and more resistant to penetration by water. Hypel-D resists water penetration by reacting deep within the cast concrete pore structure to form a very effective water repellant network throughout the masonry unit. Polymeric admixtures are a proven technology and have earned a reputation for their ability to effectively prevent moisture from penetrating concrete.

Midwest Industrial Products Corporation Deep Mix Grout 141 is a 100% solids 3 component epoxy mortar that has a very high loading of super hard, dense Aggregates. It is extremely strong and can stand up to grinding steel wheel traffic and brutal impact. It has outstanding chemical resistance and can be used in highly corrosive areas.

Hydense has the ability to aid in the dynamic dispersion of cement particles to promote better early strengths. Masonry units manufactured using Hydense are denser, have a better appearance and are less abrasive on mold equipment. Hydense manufactured masonry units exhibit the maximum strength yield obtainable from the cement and pozzolan portion of the mix.

Superflo 443 is a high molecular weight, high-range water-reducing admixture formulated to produce high slump concrete at lower water to cementitious ratios. Concrete produced with Superflo 443 shows increased flowability while maintaining early and ultimate compressive and flexural strengths. Superflo 443 is specially formulated to retain slump for extended periods of time, enabling it to be dosed at the batch plant or job site throughout the entire dosage range with normal set times.

CoreStrength 1000 LC has the ability to aid in the dynamic dispersion of cement particles to promote better early and ultimate strengths. Manufacturing of concrete units using CoreStrength 1000 LC are denser, have a better appearance and are less abrasive on mold equipment. CoreStrength 1000 LC manufactured masonry units exhibit the maximum strength yield obtainable from the cement and pozzolan portion of the mix.

72 Red™ is a very high viscosity, thixotropic, high strength threadlocker. It has excellent high temperature resistance (up to 400F) and can be used on large fasteners, where a high break away torque is desired. Because it is high in viscosity, It will not run out of the joint before it cures and can be used in applications requiring good gap filling abilities.

Detroit Body Filler 72300 is a very flexible, polyester adhesive, reinforced with milled fibers. 72300 has excellent flow, spread, and hang characteristics. 72300 should be used where a bonding putty is required. It can also be used to radius, fill or for fairing. 72300 is designed to stay flexible.

Coating & Binding Technology EMG‐15 / 3K Epoxy Grout is a three component, 100% solids, solvent‐free system formulated to provide high‐strength and superior creep resistance combined with the highest effective bearing area. EMG‐15 provides precise alignment, high impact resistance, and oil and chemical resistance to dynamic load equipment foundation applications. Coating & Binding Technology's Epoxy Machine Grout is a low exothermic epoxy system for machinery grouting.

US SPEC MP Grout is a blend of portland cement, special admixtures and proprietary aggregates designed to provide high flexural and compressive strength performance from plastic to fluid consistencies. MP Grout is non-metallic, non-shrink, non-corrosive and contains no added chlorides.

09 Green™ is a low viscosity / high strength retaining compound. 09GREEN™ bonds bushings, bearings, and gears to shafts, creating a plastic shim which seals the joint, prevents corrosion, and ultimately protects the shaft. It is also an excellent choice for high strength thread locking on medium size fasteners where high breakaway torques are required.

77 RED™ is a very high viscosity high strength threadlocker. It should be used on large fasteners, where a high break away torque is desired. Because it is high in viscosity, 77 RED™ will not run out of the joint before it cures and can be used in applications requiring good gap filling abilities.

Armor Plate 999MP Multi-Purpose Epoxy Grout is a three-component, high strength, 100% solids, epoxy grouting compound. It is primarily used to grout large machinery, support sole plates and rehabilitate concrete structures. Armor Plate 999MP exhibits early compressive strength, negligible shrinkage and is resistant to mechanical abuse and corrosive attack. Armor Plate 999MP is an ideal grouting material for use in these and other applications:; Equipment grouting for pumps and compressors Anchor bolt and rebar grouting Repairing spalled concrete Rebuilding concrete curbs Repairing concrete columns and concrete bases Deep pour applications to 12 inches.

Xtrabond 9500XHS is a high strength advanced polymer sealant. The product’s unique formula offers excellent adhesion to wide range of industrial materials, including vinyl, sheet metal, steel, pre-painted metals, wood glass, aluminum and plastic. It provides a highly weatherable, paintable surface that allows for a reduction in the number of fasteners that are required.

Coating & Binding Technology EMG‐17 / 3K Epoxy Grout is a three component, 100% solids, solvent‐free system formulated to provide high‐strength and superior creep resistance combined with the highest effective bearing area. EMG‐17 provides precise alignment, high impact resistance and oil and chemical resistance to dynamic load equipment foundation applications.

THERMOSEAL® P110 consistently used as thick paint and are carefully formulated to withstand thermal expansion and contraction and have excellent thermal insulation properties, very low shrinkage, and high strength. They are available in thick paste or thick cement consistencies. Our refractory coatings come as paste or paint, and our refractory moldable are available as putty, mixes, or pastes.

Detroit Body Filler 72100 is a fiberglass reinforced, polyester adhesive with an extended gel time. This material has excellent flow, spread, and hang characteristics and is also blister resistant. 72100 should be used where a bonding putty is required. It can also be used to radius, fill or for fairing.

CAROBOND 90 W is a high alumina, chemically bonded, wet mortar with extremely high refractoriness. It has excellent strength and metal penetration resistance. It is used for laying all types of high alumina brick. It has excellent troweling characteristics.

THERMOSEAL® P120 consistently used as light paste and are carefully formulated to withstand thermal expansion and contraction and have excellent thermal insulation properties, very low shrinkage, and high strength. They are available in thick paste or thick cement consistencies. Our refractory coatings come as paste or paint, and our refractory moldable are available as putty, mixes, or pastes.

Anti-Hydro ® -NC 1-1B is widely recommended for integral concrete waterproofing. It has been used successfully in all types of structures for many decades to waterproof concrete and improve its workability, strength, hardness, and durability. Foundations, elevator pits, sewage and water treatment plants, seawall construction, tunnels, underground utility construction, slabs-on-grade, exposed exterior concrete, tanks, tilt-ups, countertops, pre-casts, and pavements are all examples of installations.

Anti-Hydro ® -R 1-1A is widely used for integrally waterproofing concrete and mass concreting. It has been used successfully in all types of structures since 1904 to waterproof concrete and improve its workability, strength, hardness, and durability. Foundations, elevator pits, sewage and water treatment plants, seawall construction, tunnels, tanks, tilt-ups, pavements, slabs-on-grade, exposed concrete, underground utility constructions, and so on are examples of installations.

Coating & Binding Technology EMG‐19 / 3K Epoxy Grout is a two component, 100% solids, solvent‐free system formulated to provide high‐strength and superior creep resistance combined with the highest effective bearing area. EMG‐19/3K is often used to replace steel soleplates or rails and is used as an epoxy foundation capping material that is resistant to high operating temperatures. Coating & Binding Technology's Epoxy Machine Grout is a low exothermic epoxy system for machinery grouting.

Anti-Hydro ® 1-1 is widely used for integral water-proofing of concrete. It has been used successfully in all types of structures since 1904 to waterproof concrete and improve its workability, strength, hardness, and durability. Foundations, elevator pits, sewage and water treatment plants, seawall construction, tunnels, underground utility construction, slabs-on-grade, exposed exterior concrete, tanks, tilt-ups, countertops, pre-casts, and pavements are all examples of installations.

THERMOSEAL® P130 consistently used as heavy paste and are carefully formulated to withstand thermal expansion and contraction and have excellent thermal insulation properties, very low shrinkage, and high strength. They are available in thick paste or thick cement consistencies. Our refractory coatings come as paste or paint, and our refractory moldable are available as putty, mixes, or pastes.

ACCU-GROUT products are three-component, pre-proportioned, industrial grade epoxy grouting systems. ACCU-GROUT HD is a high strength construction epoxy. The recommended application temperature range for the grout products is between 60°F - 95°F (16°C - 35°C).

Olive MS-35 Polymer MS is a one-component hybrid adhesive and sealant, which is MS Polymer based, elastic and fast curing in contact with ambient moisture. OLIVE MS-35 preserves all properties of elasticity and adherence, remaining stable in front of atmospheric agents.

Rapid Set® Mortar Mix has characteristics such as high quality mortar material, use for rapid strength, durability, and low shrinkage, and so on. Sets up in 15 minutes and is ready for light traffic in an hour.