Products in Other Building & Construction Applications: Water Resist...

ChemSystems Helix Epoxy Bonder is a two-component water-based epoxy primer and moisture barrier. It is an excellent adhesion promoter between Helix cement-based overlay toppings and hard surface substrates. Helix Epoxy Bonder forms an impermeable membrane that acts as a moisture barrier and provides crack suppression properties. It is a slow cure product (24 hours) and is designed to be surface seeded with 90 mesh sand for optimum adhesion properties with any cement-based overlay.

ChemSystems Solvent Seal 27 is a high quality, 100% acrylic, solvent-based breathable sealer designed to seal concrete and masonry surfaces. CSI Solvent Seal 27 will protect surfaces from water, dust, stains, and dirt. Solvent Seal 27 produces a high gloss finish when dry.

ChemSystems CSI Solvent Seal 18/ CE 22 is a high quality, 100% acrylic, solvent-based breathable sealer designed to seal concrete and masonry surfaces. CSI Solvent Seal 18/ CE 22 will protect surfaces from water, dust, stains and dirt. CSI Solvent Seal 18/ CE 22 produces a gloss finish when dry.

ChemSystems Super Seal SB is a solvent-based penetrating sealer made of a proprietary combination of reactive compounds designed to protect concrete surfaces from staining, freeze–thaw and salt damage. CSI Super Seal SB waterproofs the concrete without darkening or enhancing the color of the substrate. Siloxane guards the surface concrete while Silane penetrates deeply to protect steel wire and rebar.

ChemSystems Cemseal WB is a high quality pure acrylic water-based sealer designed to protect both interior and exterior concrete and masonry surfaces. CemSeal WB forms a tough water clear semi-gloss protective acrylic film that resists water, dirt and common day-to-day contamination at the same time eliminating concrete dusting. This product is a good choice for sealing all types of gray or colored concrete and masonry surfaces. It can be tinted using Helix water-based Tint Packs to achieve a translucent tinted sealer.

ChemSystems CSI Solvent Seal 23 - 100 VOC Gloss is a high quality, solvent-based acrylic sealer that meets VOC regulations of 100 g/l. It is designed to seal concrete, masonry, and stone surfaces, providing a gloss finish that will protect from water, dust, stains, and dirt. It contains fast drying solvents that require the sealer to be spray applied when temperatures exceed 75 °F.

ChemSystems CSI Solvent Seal 23 - Gloss Spray Fast Dry (SPFD) is a high quality, solvent based acrylic sealer that meets VOC regulations of 400 g/l. It is designed to seal concrete, masonry, and stone surfaces, providing a gloss finish that will protect from water, dust, stains and dirt. It contains fast drying solvents that require the sealer to be spray applied when temperatures exceed 75 °F.

Colorite Performance is protective acrylic paint with high resistance to UV rays for internal and external use, available in a wide range of colors.

ChemSystems CSI Solvent Seal 23 - 100 VOC Matte is a high quality, solvent-based acrylic sealer that meets VOC regulations of 100 g/l. It is designed to seal concrete, masonry, and stone surfaces, providing a gloss finish that will protect from water, dust, stains, and dirt. It contains fast drying solvents that require the sealer to be spray applied when temperatures exceed 75 °F.

ChemSystems Helix Epoxy Primer is a two component, water-based epoxy primer designed as an adhesion promoter between Helix polymer coatings, cement based overlays, and hard surface substrates. Helix Epoxy Primer acts as a thin build primer, at the same time penetrating the surface of the substrate to provide excellent adhesion.

ChemSystems Silane 40 SB VX is a solvent-based, breathable, deep-penetrating, water repellent for concrete, masonry, and block. It protects by eliminating water intrusion which keeps harmful chemicals like deicing salts from entering the slab. Keeping water from entering the material also reduces issues related to freeze/thaw cycles and keeps rebar rust free.

Primrose Oil 327C Armor Plate with Moly-D is a heavy, tacky, green moly lubricant which provides excellent stability and unsurpassed high pressure performance especially for hot ambient and operating temperatures. Armor Plate Construction & Industrial grade grease is entirely unique due to the fact that the moly in it is a compound which provides superior performance to other greases containing the black form of moly (molybdenum disulfide).

Adesilex PG1 is two-component thixotropic epoxy adhesives for structural bonding.

CAC Bonding Agent 50 is a bonding agent for old and new cementitious substrates.

Arabian Chemical Industries ISOBOND Xtra is a liquid latex admixture formulated to enhance properties of cementitious system. Mortars modified withISOBOND Xtra gives better adhesion, water and chemical resistance, high mechanical strength and shock resistance. It is resistant to hydrolysis and suitable for internal or external applications.

Super-Tek Products Super - Tek Grout Stain is a waterbased acrylic coating designed for restoring or changing the color of existing grout joints. It also seals and protects joints from dirt, stains, wear, and abrasion.

Minchem Epitek Mortar is a high-performance epoxy-based acid and abrasion-resistant material designed to provide chemical resistance to aggressive chemical environments. They are typically provided in a two-component format comprising, an epoxy solution and an epoxy-based hardener, with the option of an inert filler powder with varying granulometry to suit the required thickness and application.

Minchem Epitek Screed is a high-performance epoxy-based acid and abrasion-resistant material designed to provide chemical resistance to aggressive chemical environments. They are typically provided in a two-component format comprising, an epoxy solution and an epoxy-based hardener, with the option of an inert filler powder with varying granulometry to suit the required thickness and application.

Hypel-D is a polymeric multi-component strength enhancing liquid water-repellant and efflorescence control admixture that is designed to enhance the beauty of manufactured concrete products while making them stronger and more resistant to penetration by water. Hypel-D resists water penetration by reacting deep within the cast concrete pore structure to form a very effective water repellant network throughout the masonry unit. Polymeric admixtures are a proven technology and have earned a reputation for their ability to effectively prevent moisture from penetrating concrete.

Accuflex Coatings AF005 - Water Repellent and Sealer (WRS) is a one component water based sodium methyl siliconate solution designed to impart water repellency to a wide variety of surfaces. The siliconate reacts with moisture and carbon dioxide in the air to form an insoluble water resistant resin. This product offers low water absorption that is maintained for long periods of time. Even exterior applications with AF005 show little change in water repellency over a five to ten year period.

H & B Industries HB-1106 FLEETLUBE Semi-Synthetic Motor Oil 15w40 CJ-4 is a heavy duty, premium grade, Semi-Synthetic diesel engine oil that provides excellent protection for newer, high performance engines that are used in the toughest on road and off road applications. FLEETLUBE CJ4 15W40 has shown to be versatile as well as able to meet the grueling demands of today’s low emission diesel engines, as well as the older models which are using both low and high sulfur fuels. Our proprietary additive package is specifically designed for late model diesel engines using catalystic emission controls on exhaust.

Armor Plate 999 High-Strength Epoxy Grout is a high strength, thermosetting, epoxy grout system. AP 999 is a packaged, premeasured, three-component system of epoxy resin, epoxy catalyst, and inert aggregate. This laboratory tested mixture produces a foundation grout with homogenous aggregate distribution. The rapid high strength and chemical resistance of the AP 999 grout provides an equipment foundation which is long-lasting, economical and maintenance free. Because of its quick cure time, AP 999 is excellent for areas where equipment must be placed in service with a short downtime. It has been used to grout all the equipment at the Prudhoe Bay, Alaska, North Slope Operations. AP 999 is used to pace equipment such as compressors, pumps, centrifuges, turbines, generators, kilns, steam engines diesel engines, milling machines, blowers and presses.

H & B Industries HB-520 Dura-Max Grease EP NLGI Grade 00 is a technically advanced, extreme pressure greases for a wide variety of industrial, and on- and off-road applications. It is formulated with type 2 base stocks, a lithium complex thickener, rust and oxidation inhibitors, and extreme pressure and tackiness additives. They are blue in color with a tacky texture. It is engineered to minimize friction and wear with a thick, velvety coating for excellent load carrying protection. They perform exceptionally well on all types of industrial bearings and slide applications. It is especially formulated for extreme pressure wheel bearing and chassis applications including the steering drag links, king pins, transmission cross shaft spring pins, shackle pins, brake cam shafts, and fifth wheel faceplates and pivots operating under high and low temperature conditions. Its high viscosity index base oil makes these products perfect for the centralized lubrication systems.

ADH 1001 is a one-coat adhesive designed to bond castable and millable urethane elastomers to metals and other rigid substrates. Water, salt spray, many solvents, and other environmental conditions are not a problem for ADH 1001 bonds.

ADH 1020 is a one-coat primer and adhesive that can be used to bond elastomers to cured urethane or vulcanized rubber. Water, salt spray, many solvents, and other environmental conditions do not affect bonds.

Adesilex PG4 is two-component, thixotropic, epoxy adhesive with modified rheology for bonding Mapeband and Mapeband TPE, PVC braces, Hypalon and for structural bonding.

Adesilex P22 is used for ceramic tiles with no vertical slip and extended open time for ceramic tiles.

Arabian Chemical Industries ISOBOND is a liquid latex admixture based on styrene butadiene rubber that is designed as an integral adhesivefor cementitious system. Mortars and concrete prepared from ISOBOND has excellent adhesion properties, chemical resistant, high strength, and waterproof. It has excellent resistance to hydrolysis (unlike PVA-based bonding system) and will perform very well under humid conditions and other applications subject to continuous and/ or alternate wettingand drying.

Armor Plate 999MP Multi-Purpose Epoxy Grout is a three-component, high strength, 100% solids, epoxy grouting compound. It is primarily used to grout large machinery, support sole plates and rehabilitate concrete structures. Armor Plate 999MP exhibits early compressive strength, negligible shrinkage and is resistant to mechanical abuse and corrosive attack. Armor Plate 999MP is an ideal grouting material for use in these and other applications:; Equipment grouting for pumps and compressors Anchor bolt and rebar grouting Repairing spalled concrete Rebuilding concrete curbs Repairing concrete columns and concrete bases Deep pour applications to 12 inches.

Tuff-Kote is a non-toxic, blended, non-shrink mortar using KelCrete Premium Super Dry Admixture and a special blend of polymers and low alkali portland cement. Fibers are added for one-coat and patch specifications. Tuff-Kote is highly resistant to water penetration, cracking, movement, etcetera. It comes with a 15-year product warranty when used in accordance with the Tuff-Kote Flex/Kel-Prime Plaster System. Tuff-Kote meets EPA Leeds and Carbon Footprinting standards. Tuff-Kote Flex 10,000 is a high-end special formulation that provides maximum benefits. It should only be considered by residential or commercial owners and their architects who are more interested in longevity than material costs. It is flexible and will greatly resist movement of buildings, and gives high psi values.

Colorite Beton is a semi-transparent, anti-carbonatation acrylic paint with a smooth finish for internal and external surfaces.

Akfix 888P Flexible PU Gun Foam is a single-component PU flexible foam used with an applicator gun and features flexibility, high performance, easier application and reusability. It does not contain any propellant gasses which are harmful to the ozone layer. The foam has a minimum expansion after application (less than 50%) and is therefore very economical to use. The foam is very elastic and has a very high acoustic rating and thermal insulation value.

Classic Quick Seal Wet Look is a clear, single component sealer that is designed to be used over all Classic Stains, polymer modified cement toppings, waterborne colorants, concrete, masonry, pavers, natural flagstone, and brick. Quick Seal is a waterborne acrylic with low VOC and high solids. May be used for interior or exterior applications in a wide range of climates.

Adesilex PG2 is two-component thixotropic epoxy adhesives for structural bonding.

Accuflex Coatings AF085 - Clear Solvent Based Acrylic Sealer is a one component solvent based Waterproofing Sealer and treatment for application to porous substrates such as concrete or cement for the purpose of preventing the penetration of water. The acrylic sealer that offers excellent gloss and the product has a fast set time.

Adesilex P25 is ready for use paste adhesive, with no vertical slip and extended open time, for ceramic tiles.