Products in Other Consumer Goods Applications

Screamin' SRX Fluorescent Paint is a premium, low odor, water-based fluorescent latex paint. Maximum lightfastness and film integrity are dependent upon the use of DayGlo FILTERAY® Type "W" (clear overcoat). DayGlo® Screamin' SRX paints appear to glow in the dark when exposed to black light.

Z/ZQ® Series are fluorescent pigments for low plateout, olefin applications. Z and ZQ® pigments are produced in a thermoplastic polyamide resin.

R10X0 is a pure orthophthalic unsaturated polyester resin of medium reactivity and medium viscosity dissolved in styrene. R10X0 is mostly used in casting production.

Screamin' SRX Fluorescent Paint is a premium, low odor, water-based fluorescent latex paint. Maximum lightfastness and film integrity are dependent upon the use of DayGlo FILTERAY® Type "W" (clear overcoat). DayGlo® Screamin' SRX paints appear to glow in the dark when exposed to black light.

StarFire® II Litho Bases are a unique combination of ultra-fine, high strength fluorescent pigment dispersed in a rheologically controlled vehicle system. This yields maximum color density and excellent printability.

StarFire® II Litho Bases are a unique combination of ultra-fine, high strength fluorescent pigment dispersed in a rheologically controlled vehicle system. This yields maximum color density and excellent printability.

Z/ZQ® Series are fluorescent pigments for low plateout, olefin applications. Z and ZQ® pigments are produced in a thermoplastic polyamide resin.

DayGlo offer both fluorescent and non fluorescent dyes for plastics. DayGlo's dyes are cost effective alternatives to using pigments when applied in polystyrene and many other engineering resins.

Z/ZQ® Series are fluorescent pigments for low plateout, olefin applications. Z and ZQ® pigments are produced in a thermoplastic polyamide resin.

VIVAPUR® HPMC K4M is a medium viscosity hydroxypropyl methyl cellulose in powder form. It is solvable in water and forms a reversible gel above a specific gelling temperature. VIVAPUR® HPMC K4M can also be used to increase tack and form transparent and flexible films which show oil barrier properties. VIVAPUR® HPMC K4M is an EU approved food additive which complies with the specifications according to Reg. (EU) No. 231/2012 and Food Chemical Codex. For an EU usage please consider food categories and maximum levels listed in Reg. (EC) No 1333/2008.

StarFire® II Litho Bases are a unique combination of ultra-fine, high strength fluorescent pigment dispersed in a rheologically controlled vehicle system. This yields maximum color density and excellent printability.

Medium/high heat grade with superior impact resistance, PC-modified, low emission. Major Benefits: Low emission; Very high impact (PC modified). Typical Applications: Radiator grille, Tailgate cover, Glove box, Instrument panel parts.

MicroFLON T-Series powders are recycled PTFE micronized to various particle sizes. MicroFLON® T-Series is based on recycled PTFE powder that offers an attractive alternative to costly virgin PTFE. As confirmed in recent independent testing, MicroFLON® T offers a superior coefficient of friction and wear resistance in both nylon and polyoxymethylene when compared against virgin PTFE. Recycled PTFE also offers a significant reduction in carbon footprint relative to the use of prime PTFE.

PC/ABS blend, injection molding grade with excellent mechanical properties balance up to -40ºC. Vicat B120 = 120ºC. Major Benefits: High flow; Very high impact up to -40ºC; Low emission grade; UV stabilized grade; Good stability even with high humidity conditions; Low shrinkage; Good paintability; Thin-walled parts. Typical Applications: Radiator grille, Pillars, Instrument panel parts, Seating parts, Center console trim, Door components, Small household, Electrical switches, distribution boards, power sets. Chemical composition: Thermoplastic polymer blend based on polycarbonate (PC) and acrylonitrile-butadienestyrene (ABS).

Rainmaker Polymers RRPSMF09NA0 is a general purpose crystal.

DayGlo offer both fluorescent and non fluorescent dyes for plastics. DayGlo's dyes are cost effective alternatives to using pigments when applied in polystyrene and many other engineering resins.

PELPRENE™ S3001 is a Thermoplastic Polyester Elastomer (TPEE) product. It is available in North America. Typical application: Automotive. Characteristics include: Flame Rated Copolymer Heat Resistant Weather Resistant

DayGlo offer both fluorescent and non fluorescent dyes for plastics. DayGlo's dyes are cost effective alternatives to using pigments when applied in polystyrene and many other engineering resins.

DayGlo offer both fluorescent and non fluorescent dyes for plastics. DayGlo's dyes are cost effective alternatives to using pigments when applied in polystyrene and many other engineering resins.

Adell Plastics, Inc. Adell™ Polyamide AS-30 is a Polyamide 66 (Nylon 66) material. It is available in North America. Primary attribute of Adell Polyamide AS-30: Flame Rated.Typical application of Adell Polyamide AS-30: Automotive

Z/ZQ® Series are fluorescent pigments for low plateout, olefin applications. Z and ZQ® pigments are produced in a thermoplastic polyamide resin.

T19X9 is an orthophthalic unsaturated polyester resin tixotropic, preaccellerated , and catalysis indicator. T19X9 is mostly used in hand lay-up application.

VIVAPUR® Pectin LC-S18XH is a water solvable pectin with a low degree of methoxylation in form of a beige powder. It can be used to form a thermo-stable gel or bio-based transparent coatings with oil and oxygen barrier properties upon the addition of higher valent ions (e.g. Ca2+). VIVAPUR® Pectin LC-S18XH is an EU approved food additive which complies with the specifications according to Reg. (EU) No. 231/2012 and Food Chemical Codex. For an EU usage please consider food categories and where required maximum levels listed in Reg. (EC) No 1333/2008.

StarFire® II Litho Bases are a unique combination of ultra-fine, high strength fluorescent pigment dispersed in a rheologically controlled vehicle system. This yields maximum color density and excellent printability.

StarFire® II Litho Bases are a unique combination of ultra-fine, high strength fluorescent pigment dispersed in a rheologically controlled vehicle system. This yields maximum color density and excellent printability.

Electroplating grade. Benefits: High Galvano quality for class A surfaces; High flowability. Applications: Shower heads and other sanitary chromed parts, Cosmetic packaging, chromed kitchen products.

NicSalt B is a premium quality nicotine salts dedicated to e-liquid and nicotine pouches manufacturing. NicSalt-B (Nicotine Salt Benzoate) - nicotine powder manufactured by mixing nicotine base with benzoic acid. Benzoic acid is widely used in the food industry.

Extrusion homopolymer PP, 30% glass fibers reinforced. For SDS, please contact Addiplast Group using the 'Request Document' button.

Adell PC DR-10 is a Polycarbonate (PC) material. It is available in North America.

VYNOVA™ S5730 is low molecular weight, low porosity vinyl chloride homopolymer. It is general purpose resin suitable for extrusion, calendering and injection blow molding of PVC - films for packaging or consumer goods, compact foamed sheets and profiles, foamed core pipes and fittings, and bottles.

Adell Plastics, Inc. Adell™ Polyamide BW-17 is a Polyamide 6 (Nylon 6) material filled with 33% glass fiber. It is available in North America.Important attributes of Adell Polyamide BW-17 are: Flame Rated Good Esthetics

PC/ABS blend, injection molding grade that poses a good combination of impact, stiffness and toughness. Vicat B120 = 130ºC. Major Benefits: Low emission, Extreme heat resistance, Very high impact, High flowability. Typical Applications: Rear light housing, Pillars, Instrument panel parts, Coffee machine, Electrical switches, distribution boards, power sets. Chemical composition: Thermoplastic polymer blend based on polycarbonate (PC) and acrylonitrile-butadienestyrene (ABS).

High impact strength, high gloss, contains antistatic additive. Applications: Power tool boxes

XPETG CF Carbon is one of the world‘s most common thermoplastic polymers. Extrudr XPETG CF was developed for a wide range of applications where the main requirement is a good balance between mechanical and optical material properties. The raw material is approved according to the REACH- and RoHS-Standards. PETG is flame retardant according to UL 94 at a wall thickness of 3.2 mm.

Poly Chem Alloy FlexPlast 3905E is a plastic material that combines the processing advantages of a thermoplastic with the properties and performance of a rubber-like material. The product is a soft, flexible, highly elastic material that can be custom formulated to perform in a variety of processes, including injection molding, extrusion, blow molding, and thermoforming. These lower modulus, flexible materials can typically be stretched repeatedly, only to return to their original shape when relaxed. When heated, FlexPlast will soften until it flows, making it suitable for formation into complex shapes using standard thermoplastic processing equipment.