Products in Automotive Electronics: Laminate

Vetronite® EGS 102 is composed of epoxy matrix and glass fabric reinforcement. it appears in Green color with EP GC 201 G-10 Standards

IS550H was developed in conjunction with a consortium of industry experts for high power & high voltage applications and PEV & HEV automotive electrification. The resulting solution addresses critical application needs for use in a harsh environment where very demanding, long term thermal reliability performance, extreme thermal cycling and very high voltage CAF & electro-migration resistance is required.

Vetronite® EGS T-23 is composed of epoxy matrix and glass fabric reinforcement. it appears in Olive gray color with EP GC 203/308 G-11 Standards.

MICAM’s CG-10 is an excellent mechanical and electrical epoxide copper clad laminate

Astra MT77 laminate materials exhibit exceptional electrical properties which are very stable over a broad frequency and temperature range. Astra MT77 is suitable for many of today’s commercial RF/microwave printed circuit designs. It features a dielectric constant (Dk) that is stable between -40°C and +140°C at up to W-band frequencies. In addition, Astra MT77 offers an ultra-low dissipation factor (Df) of 0.0017, making it a cost-effective alternative to PTFE and other commercial microwave laminate materials. Key applications include long antennas and radar applications for automobiles, such as adaptive cruise control, pre-crash, blind spot detection, lane departure warning and stop and go systems.

MICAM MG43R is a UL recognized flame retardant FR4 epoxy-glass copperclad laminate offering excellent mechanical and electrical performance.

I-Tera MT40 is suitable for many of today’s high speed digital and RF/microwave printed circuit designs. I-Tera MT40 features a dielectric constant (Dk) that is stable between - 55°C and +125°C up to W-band frequencies. In addition, I-Tera MT40 offers a lower dissipation factor (Df) of 0.0031 making it a cost effective alternative to PTFE and other commercial microwave and high-speed digital laminate materials. I-Tera MT40 laminate materials are currently being offered in both laminate and prepreg form in typical thicknesses and standard panel sizes. This provides a complete materials solution package for high-speed digital multilayer, hybrid, RF/microwave, multilayer and double-sided printed circuit designs. I-Tera MT40 does not require any special through hole treatments commonly needed when processing PTFE-based laminate materials.

MICAM’s FR-4 flame retardant epoxy-glass copper clad laminate offering excellent mechanical and electrical performance

Delmat® 68900 is composed of epoxy modified matrix and glass mat reinforcement. It appears in brownish Color.

MICAM’s CG-11 is a high heat resistance epoxy-glass copper clad laminate with excellent mechanical and electrical performance

MICAM CEM-30 is a UL recognized flame retardant CEM-3 copper clad composite laminate offering excellent electrical performance along with good punching characteristics.

Delmat® Polyester 68020 is composed of polyester matrix and glass mat reinforcement. it appears in white RAL 9001 color with UP GM 203 GPO-3 Standards.

P95/P25 consist of an HB flammability rated polyimide resin system suitable for military, commercial or industrial electronic applications requiring superior performance and the utmost in thermal properties. These products utilize a polyimide and thermoplastic blend resin, fully cured without the use of MDA (Methylenedianiline). This results in a polymer with a high Tg without the characteristic difficulties of brittleness and low initial bond strength associated with traditional thermoset polyimides.

Delmat® Polyester 68010 GPO-3 is composed of polyester matrix and glass mat reinforcement. it appears in RED RAL 9001 color with UP GM 203 GPO-3 Standards.

MICAM CEM-33 is a UL recognized flame retardant CEM-3 copper clad composite laminate offering excellent electrical performance along with good punching characteristics.

Isola’s IS410 has a glass transition temperature (Tg) of 180°C and is specially formulated for superior performance through multiple thermal excursions, passing 6X solder tests at 288°C. IS410 is optimized for enhanced drilling performance allowing high aspect ratio holes of ≤10 mils. Its unique resin chemistry provides CAF resistance with the benefit of long-term reliability of boards built with small feature designs.

370HR laminates and prepregs, deigned by Polyclad, are made using a patented high performance 180°C Tg FR-4 multifunctional epoxy resin system that is designed for multilayer Printed Wiring Board (PWB) applications where maximum thermal performance and reliability are required. We manufacture 370HR laminates and prepregs with high quality E-glass glass fabric for superior Conductive Anodic Filament (CAF) resistance. 370HR provides superior thermal performance with low Coefficient of Thermal Expansion (CTE) and the mechanical, chemical and moisture resistance properties that equal or exceed the performance of traditional FR-4 materials. 370HR is used in thousands of PWB designs and has proven to be best in class for thermal reliability, CAF performance, ease of processing and proven performance on sequential lamination designs.

Delmat® Polyester 68420 is composed of Polyester matrix and glass mat reinforcement. It appears in Red RAL 4002 color with UP GM 202 GPO-2 Standards.

185HR laminate and prepreg materials are manufactured using Isola’s patented technology, reinforced with electrical grade (E-glass) glass fabric. This system delivers a 340°C decomposition temperature, a lower Z-axis expansion and offers lower loss compared to competitive products in this space. The 185HR system is also laser fluorescing and UV blocking for maximum compatibility with Automated Optical Inspection (AOI) systems, optical positioning systems and phot imageable solder mask imaging.