Products in Consumer Electronics

Braskem America PG13H Polypropylene Homopolymer is a versatile solution renowned for its exceptional long-term heat aging properties. Tailored to meet various needs, it finds its application across a spectrum of uses including strapping, profiles, and is particularly well-suited for appliance and compounding applications. Notably, it adheres to UL 94 HB standards, ensuring high-quality performance.

All Braskem America production facilities are certified to produce bio, bio-circular, and circular polypropylene under the ISCC PLUS certification via the mass balance approach.

For more information regarding REACH, please visit Braskem's site

ELASTOSIL® E47 Transparent is a non-slump, one-component acetoxy-cure silicone rubber that cures at room temperature under the influence of atmospheric moisture. It shows particularly excellent adhesion to cured silicone elastomers. Vulcanization can be accelerated by elevated temperatures (up to 80°C).

ELASTOSIL® RT 772 is a flowable, condensation-curing RTV-2 silicone used for potting and coating applications. When used with a curing agent from the WACKER® Catalyst T 77 series, it forms a self-bonding and durable silicone rubber. Cured ELASTOSIL® RT 772 offers excellent long-term stability against weathering, moisture, and UV light. The silicone elastomer can endure constantly changing climatic conditions, UV radiation, and temperatures as high as 230°C (446°F) without damage.

ELASTOSIL® N9111 Grey is a non-slump, alkoxy-cure, one-component silicone that cures at room temperature under the influence of atmospheric moisture. Due to its shear-thinning nature, this product is easy to apply. The material starts curing upon contact with air humidity. It shows excellent primerless adhesion to many substrates, like glass, aluminum, stainless steel, PA, and PBT.

ELASTOSIL® RT 778 is a non-slump, condensation-curing RTV-2 silicone adhesive. When used with a curing agent from the WACKER® Catalyst T 77 series, it forms a self-bonding and durable silicone rubber. Cured ELASTOSIL® RT 778 offers excellent long-term stability against weathering, moisture, and UV light. The silicone elastomer can continuously endure changing climatic conditions, UV radiation, and temperatures up to 250°C (482°F) without damage.

SILRES® K is a solution of a condensation-curing methyl silicone resin in toluene. The product can be used as a binder or as an impregnation agent for porous materials. Besides, SILRES® K is the ideal product for making tack-free prepregs with excellent storage stability. Fully cured SILRES® K has a very low carbon content and thus yields a high ash content when pyrolized. Composites made of SILRES® K show long-term stability against weathering, moisture, and UV light. They can therefore be continuously exposed to constantly changing climatic conditions, UV radiation, and temperatures significantly higher than 300 °C (572 °F). SILRES® K also provides water repellency and excellent electrical insulation properties to the respective composite materials.

ELASTOSIL® E43 Black is a self-leveling, one-component acetoxy-cure silicone rubber that cures at room temperature under the influence of atmospheric moisture. It shows excellent mechanical properties and has good adhesion properties to many substrates. In particular used as adhesive on cured silicone rubber.

ELASTOSIL® RT 702 White is a non-slump, one-part heat-curing silicone adhesive. The cured material demonstrates very good adhesion to many substrates and long-term stability against weathering, moisture, and UV light. The cured silicone rubber can continuously withstand constantly changing climatic conditions, UV radiation, and temperatures as high as 210°C (410°F) without sustaining damage.

ELASTOSIL® RT 773 is a non-slump, condensation-curing RTV-2 silicone. When used with a curing agent from the WACKER® Catalyst T 77 series, it forms a self-bonding and durable silicone rubber. Cured ELASTOSIL® RT 773 offers excellent long-term stability against weathering, moisture, and UV light. The compressible silicone elastomer can continuously endure changing climatic conditions, UV radiation, and temperatures as high as 140°C (284°F) without damage.

ELASTOSIL® RT 707 W is a flowable, one-part, heat-curing silicone used for potting and coating applications. The cured material demonstrates very good adhesion to many substrates and long-term stability against weathering, moisture, and UV light. The cured silicone rubber can continuously withstand constantly changing climatic conditions, UV radiation, and temperatures as high as 230°C (446°F) without sustaining damage.

ELASTOSIL® RT 771 is a self-leveling, condensation-curing RTV-2 silicone adhesive. When used with a curing agent from the WACKER® Catalyst T 77 series, it forms a self-bonding and durable silicone rubber. Cured ELASTOSIL® RT 771 offers excellent long-term stability against weathering, moisture, and UV light. The silicone elastomer can continuously withstand changing climatic conditions, UV radiation, and temperatures up to 180°C (356°F) without damage.

ELASTOSIL® A33 Ivory is a moisture-curing silicone rubber (RTV-1) that does not slump and cures at room temperature. It releases an organic amine during the vulcanization process. ELASTOSIL® A33 demonstrates excellent primerless adhesion to a wide range of substrates. This multipurpose grade is suitable for sealing and bonding applications, offering resistance to high temperatures and contact with oil.

ELASTOSIL® E43 Transparent is a self-leveling, one-component acetoxy-cure silicone rubber that cures at room temperature under the influence of atmospheric moisture. It shows excellent mechanical properties and has good adhesion properties to many substrates. In particular, it is used as adhesive on cured silicone rubber.

ELASTOSIL® E70 is a flowable, one-component, acetoxy-cure silicone rubber that cures at room temperature under the influence of atmospheric moisture. It shows excellent primerless adhesion to many substrates and outstanding heat stability even in long-term exposure. It is a high-temperature-resistant grade for sealing and bonding applications under high thermal stress.

ELASTOSIL® RT 402 is a pourable, condensation-curing, two-component silicone rubber that vulcanizes at room temperature. It is characterized by its antistatic properties, condensation-curing mechanism, and flowability. This silicone rubber is commonly used in applications such as elastomers for pad printing, where its unique properties are beneficial.

SEMICOSIL® 988/1K Grey is a non-slump, thermally curable, one-part silicone rubber. It is a ready-to-use system that exhibits low viscosity during dispensing, making it easy to work with. This product serves as a low-thermal-stress sealing adhesive with a medium hardness. It offers high flexibility and demonstrates excellent primerless adhesion to a wide range of substrates.

ELASTOSIL® RT 706 is a self-leveling, slightly thixotropic, one-part heat-curing silicone used for potting and coating applications. The cured material demonstrates very good adhesion to many substrates and long-term stability against weathering, moisture, and UV light. The cured silicone rubber can continuously withstand constantly changing climatic conditions, UV radiation, and temperatures as high as 230°C (446°F) without sustaining damage.

CRA® 17 is a highly efficient controlled-release additive designed specifically for adjusting the release force of solvent-free DEHESIVE® systems. It offers exceptional performance in achieving the highest release values among all CRA® modifiers. Its key features include high efficiency, rapid curing, and stable release characteristics.

ELASTOSIL® LR 3003/30 R A/B is a liquid silicone rubber of the ELASTOSIL® LR 3003 series. It is a paste-like, easily pigmentable, two-component compound with a short curing time. Its vulcanizates are noted for their high transparency and excellent mechanical properties.

SILRES® H62 C is a liquid, solvent-free, one-part heat-curing phenyl silicone resin formulation. The product is ideal for impregnating the electrical coils of motors and generators. Besides, SILRES® H62 C can be used to provide hydrophobic properties to porous materials and as a binder for composites made of fibrous fillers, cloths, and woven or non-woven reinforcing materials. The formulation is ready-to-use and crosslinks under heat. While curing, SILRES® H62 C does not release chemical byproducts, so curing shrinkage is barely noticeable. The product also thermosets in thick layers, even when in contact with air. Fully cured SILRES® H62 C has excellent electrical insulation properties and outstanding long-term heat resistance. Additionally, it shows high stability against weathering, moisture, and UV light and can therefore be continuously exposed to constantly changing climatic conditions or UV radiation.

ELASTOSIL® A07 Translucent is a free-flowing, solvent-based RTV-1 silicone dispersion. It cures at room temperature or at elevated temperatures by reacting with air humidity to form a flexible silicone coating. During cure, it splits off an organic amine. It can be applied by dipping, spraying, brushing, or coating. Thinner coatings can be obtained by the addition of solvents (e.g. toluene, white spirit); thicker coatings can be realized by multiple-step coating.

ELASTOSIL® N9111 White is a non-slump, non-corossive, alkoxy-cure, one-component silicone that cures at room temperature under the influence of atmospheric moisture. It is a multipurpose sealant and adhesive for the appliance, automotive, and electronics industries. Due to its shear-thinning nature, ELASTOSIL® N9111 White is easy to apply. The material starts curing upon contact with air humidity.

ELASTOSIL® RT 702 is a one-part heat-curing silicone adhesive that exhibits non-slump properties. Once cured, ELASTOSIL® RT 702 demonstrates excellent adhesion to a wide range of substrates, along with long-term stability against weathering, moisture, and UV light. The cured silicone rubber can withstand constant exposure to varying climatic conditions, UV radiation, and temperatures up to 250 °C (482 °F) without sustaining any damage.

ELASTOSIL® N9111 Black is a non-slump, alkoxy-cure, one-part silicone that cures at room temperature under the influence of atmospheric moisture and exhibits excellent adhesion to many substrates. Fully cured ELASTOSIL® N9111 Black has excellent flame retardant properties and shows long-term stability against weathering, moisture, and sunlight.

ELASTOSIL® A234 White is a flowable RTV-1 silicone rubber that cures at room temperature under the influence of moisture. It shows excellent primerless adhesion to many substrates and offers outstanding heat stability. It is a multipurpose grade for high-temperature applications. Suitable for sealing and bonding, such as the bonding of steam chambers and sole plates of steam irons,

ELASTOSIL® RT 774 is a non-slump, condensation-curing RTV-2 silicone. When used with a curing agent from the WACKER® Catalyst T 77 series, it forms a self-bonding and durable silicone rubber. Cured ELASTOSIL® RT 774 offers excellent long-term stability against weathering, moisture, and UV light. The compressible silicone elastomer can continuously endure changing climatic conditions, UV radiation, and temperatures as high as 140°C (284°F) without damage.

ELASTOSIL® RT 705 is a self-leveling, slightly thixotropic, one-part silicone that cures with heat. It is primarily used for potting and coating applications but can also be used as a surface adhesive when applied in a thin layer, such as by silk-screen printing. Once cured, ELASTOSIL® RT 705 exhibits excellent adhesion to various substrates and demonstrates long-term stability against weathering, moisture, and UV light. The cured silicone rubber can withstand continuously changing climatic conditions, UV radiation, and temperatures as high as 230 °C (446 °F) without sustaining any damage.

ELASTOSIL® RT 708 is a self-leveling, slightly thixotropic, one-part silicone that cures with heat. It is designed for potting and coating applications and can also be used as a surface adhesive when applied in a thin layer, such as through silk-screen printing. Once cured, ELASTOSIL® RT 708 exhibits excellent adhesion to various substrates and offers long-term stability against weathering, moisture, and UV light. The cured silicone rubber can withstand continuously changing climatic conditions, UV radiation, and temperatures as high as 230 °C (446 °F) without sustaining any damage.

ROHACELL® HF is an advanced closed-cell rigid foam, rooted in polymethacrylimide (PMI) chemistry and entirely devoid of CFCs. This foam is uniquely suited for antenna applications due to its exceptional characteristics. Notably, ROHACELL® HF boasts remarkably low dielectric constants and excellent transmission properties at high frequencies, making it an ideal choice for applications requiring precise and efficient electromagnetic performance in the realm of antennas.

TEGO® Cycle CP 320 is an organo-modified siloxane that is used as a processing additive, compatibilizer, and for permanent modification of polymer properties. It is particularly suitable for recycled polymers, as it can be used to compatibilize PE in PP, PP in PE, and PA in polyolefins. TEGO® Cycle CP 320 is ideal for producing automotive parts, electronic appliances, packaging materials, consumer goods, and oriented packaging straps. Its use provides several advantages for specific applications, including improved mechanical performance, better weld line strength, and prevention of stress cracking and whitening. It also improves mold release properties, reduces manual interventions, and allows for more exact reproduction of surface structure, resulting in shorter cycle times.

TEGO® CYCLE CP 310 is an organo-modified siloxane that is used as a processing additive, compatibilizer, and for permanent modification of polymer properties. Its use provides several advantages for specific applications. It reduces gelling, resulting in lower failure rates, reduces pressure, increases throughput, and prevents melt fracture and shark skin effect. It also reduces surface roughness. TEGO® CYCLE CP 310 shortens cycle times, prevents cut propagation in oriented tapes and films, and improves mechanical performance, including notched impact strength and elongation at break. It also prevents stress cracking and whitening.

METABLEN™ S 2200 is a silicone-acrylic-based rubber impact modifier with an epoxy-modified shell.Compatible with Polyethylene terephthalate (PET), polybutylene terephthalate (PBT), polyamide (PA) and alloy, it provides hydrolysis resistance, heat-aging resistance and impact strength for a wide range of automotive, aerospace and electric and electronic applications.FeaturesWeather stabilityHydrolysis resistanceImpact resistance even at low temperatures *METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group

METABLEN™ A-3750 is an acrylic-modified polytetrafluoroethylene (PTFE) used as an anti-dripping agent in flame retardant formulations. It can be used for PC and alloy in automotive, aerospace, consumer goods, and electric and electronic applications.BenefitsResins with METABLEN™ A-3750 and flame retardants achieve V-0 in UL-94 testingImproves melt tensionIncreases die swell to improve surface appearanceImproves filler dispersibilityIncreases foam expansion ratioFeaturesAnti-drippingEasy to handleHigher dispersibility than standard PTFE powders*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

METABLEN™ C 223A is a butadiene-based rubber and graft copolymer. It is used as an impact modifier for ABS, polyamides, PC, PLA, and other matrix resins in automotive and transportation, electrical and electronics, and consumer goods applications.FeaturesImpact resistanceSuper high impact strength in all temperatures*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

SHIKOH™ UV-3700B is UV curable urethane acrylate oligomer with high elongation and soft rubbery elasticity. It is relatively low viscosity despite its high molecular weight. EB and Thermal cure systems are also applicable. Features Soft elastic type, High elongation High molecular weight but relatively low viscosity Non-solvent (100% hardening ingredient) For UV adhesion with monomers Non-yellowing Applications Adhesive: UV/ EB/ Thermal-curable adhesive for electronics device, optical use and automotive use. 3D printer *SHIKOH™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

METABLEN™ S 2130 is a silicone-acrylic-based rubber impact modifier optimized for flame retardant polycarbonate (PC) resins. It adds colorability, heat-aging resistance and impact strength to PC and polycarbonate blends in automotive, aerospace, consumer goods, and electric and electronic applications.FeaturesWeather stabilityHydrolysis resistanceImpact resistance even at low temperatures*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.