Products in Devices & Assemblies: Silicones

ELASTOSIL® R 501/75 OH is a peroxide-curing high-consistency silicone rubber (HCR) for the manufacture of flame retardant products. This product is recommended to be used in cable insulations for household, automotive, railway, marine, and aerospace applications where high flame retardancy is required.

SEMICOSIL® 9981 TC is a one-part, thermally conductive paste with electrical conductivity that cures into a gap-filling silicone. The thermal paste efficiently fills the finest gaps of heat-generating and ablating substrates, minimizing contact resistance. The thermal resistance is minimized due to an exceptional thermal conductivity of 10 W/mK, in combination with the possibility of reducing bond line thickness to 10 μm.

ELASTOSIL® E43 N Black is a one-part, non-slump, self-leveling silicone adhesive. When exposed to air moisture, it cures at room temperature to yield a permanently flexible silicone rubber with very good mechanical properties. Fully cured ELASTOSIL® E43 N Black shows long-term stability against weathering, moisture, and UV radiation. The silicone elastomer may continuously be exposed to constantly changing climatic conditions, UV radiation, and temperatures as high as 230°C without damage.

ELASTOSIL® RT 703 is a self-leveling, slightly thixotropic, one-part heat-curing silicone adhesive. It can also be used for surface printing purposes when applied by serigraphy. Cured ELASTOSIL® RT 703 displays excellent adhesion to various substrates and long-term stability against weathering, moisture, and UV light. The cured silicone rubber can continuously withstand changing climatic conditions, UV radiation, and temperatures as high as 200°C (392°F) without damage.

ELASTOSIL® E50 N Transparent is a flowable, one-part silicone rubber for potting, coating, or sealing applications. When exposed to air moisture, it cures at room temperature to yield a permanently flexible silicone rubber with very good mechanical properties. Fully vulcanized ELASTOSIL® E50 N Transparent shows long-term stability against weathering, moisture, and UV radiation. The silicone elastomer may continuously be exposed to constantly changing climatic conditions, UV radiation, and temperatures as high as 180°C without damage.

WACKER® AR 200 silicone fluid is a clear, colorless, and odorless polydimethylsiloxane with phenyl groups. It is commonly used as a heat transfer fluid and pressure transfer fluid, offering excellent thermal stability and efficient performance. Additionally, it serves as a base fluid in lubricants.

CHT Group QSil 223 is a transparent and colorless silicone formulation that is ideal for optical applications. Its viscosity profile enables excellent flow around components, and it is excellent for potting complex parts. The chemical composition results in a cured product that is hydrolytically stable as well as reversion-resistant. The silicone elastomer provides electrical insulation and physical shock resistance for components and enables environmental protection.

CHT Group SE3000 is a 2-component silicone elastomer system specially designed for electronic potting and encapsulation applications. It offers good protection against chemicals, environmental contamination, mechanical shock, vibration, and impact damage. It can be employed in areas where low flammability is a prerequisite. The cured elastomer can be repaired. The component parts have relatively low viscosities and are readily mixed, either by hand or machine.

CHT Group QSil 553 is a 2-component silicone elastomer system specially designed for electronic potting and encapsulation applications. It offers good protection against chemicals, environmental contamination, mechanical shock, vibration, and impact damage. It can be employed in areas where low flammability is a prerequisite. The cured elastomer can be repaired. The component parts have relatively low viscosities and are readily mixed, either by hand or machine.

CHT Group QSil 214 is a transparent and colorless silicone formulation that is ideal for optical applications. Its viscosity profile enables excellent flow around components, and it is excellent for potting complex parts. The chemical composition results in a cured product that is hydrolytically stable as well as reversion-resistant. The silicone elastomer provides electrical insulation and physical shock resistance for components and enables environmental protection.

CHT Group SilSo Clear 21002 is a transparent and colorless silicone formulation that is ideal for optical injection molding applications. Its viscosity profile enables excellent flow around components, and it is excellent for potting complex parts. The chemical composition results in a cured product that is hydrolytically stable as well as reversion-resistant. The silicone elastomer provides electrical insulation and physical shock resistance for components and enables environmental protection.

CHT Group AS1803 is a non-corrosive, neutral-cure, 1-part, RTV (Room Temperature Vulcanizing) silicone adhesive sealant. It is one in a range of acetone-cure products that are solvent-free. It exhibits excellent primerless adhesion to many substrates and cures rapidly at room temperature to form a tough rubber when in contact with atmospheric moisture. This product will not corrode copper or its alloys and is suitable for use with electronic components.

CHT Group SilSo Bond 14000 is a non-corrosive, neutral-cure, 1-part, RTV (Room Temperature Vulcanizing) silicone adhesive sealant. It is one in a range of alkoxy cure products that are solvent-free. It exhibits excellent primerless adhesion to many substrates and cures at room temperature to form a tough rubber when in contact with atmospheric moisture. This product will not corrode copper or its alloys and is suitable for use with electronic components.

CHT Group AS1707 is a non-corrosive, neutral-cure, 1-part, RTV (Room Temperature Vulcanizing) silicone adhesive sealant. It is one in a range of alkoxy cure products that are solvent-free. It exhibits excellent primerless adhesion to many substrates and cures at room temperature to form a tough rubber when in contact with atmospheric moisture. This product will not corrode copper or its alloys and is suitable for use with electronic components.

CHT Group AS1821 is a non-corrosive, neutral-cure, 1-part, RTV (Room Temperature Vulcanizing) silicone adhesive sealant. It is one in a range of acetone-cure products that are solvent-free. It exhibits excellent primerless adhesion to many substrates and cures rapidly at room temperature to form a tough rubber when in contact with atmospheric moisture. This product will not corrode copper or its alloys and is suitable for use with electronic components.

MC507U is a utility grade, glass fabric combined with a silicone resin system. It can be substituted for NEMA G-7, in most heating, appliance insulation and some bearing applications. MC507U has excellent strength and electrical properties. MC507U complies with MIL-I-24768/17 – GSG, with the exception of some specific electrical properties. Certification to IEC standard is pending.

SC-417 is a two-part, low viscosity, clear silicone which will cure at room temperature or at elevated temperatures. The cured elastomer is suited for electrical/electronic potting and encapsulating applications and provides environmental protection. It is readily pourable and can cure from room temperature to 200°C. The cured resin has a very good flexibility with excellent electrical properties and high temperature resistance.

SC-550-LV-TC-1 is a 100% silicone solid elastomer designed for electronic potting applications. This two-component system offers a hard, self-bonding, thermally conductive, low modulus material that is readily repairable. SC-550LV-TC-1 is highly filled and offers excellent thermal conductivity. It is also offers a convenient mix ratio of 1:1 by weight and volume.

SC-454M-6 is a thermally conductive, low viscosity, condensation cure, RTV silicone potting or encapsulating compound. It is readily pourable and can cure at room temperature. The cured resin has a very good flexibility with excellent electrical properties and high temperature resistance.

SC-550-LV-RT is a 100% silicone solid elastomer designed for electronic potting applications. This two-component, room temperature curing system offers a hard, self-bonding, thermally conductive, low modulus material that is readily re-workable.

SC-550-LV-TC-2 is a 100% silicone solid elastomer designed for electronic potting applications. This two-component system offers a hard, self-bonding, thermally conductive, low modulus material that is readily repairable. SC-550LV-TC-2 is highly filled and offers excellent thermal conductivity. It is also offers a convenient mix ratio of 1:1 by weight and volume.

Cuyahoga Plastics S-4021 is a glass, mineral & graphite filled Silicone Thermoset molding compound specifically designed for contact components in the hot glass handling industry.

CGSTAPE - 1158 is a 3 mil skived PTFE film backing with an silicone pressure sensitive adhesive.

RT507F is manufactured using a fine weave glass fabric combined with a silicone resin system. It has excellent electrical properties under humid conditions, superior heat and arc resistance. Typical applications include heating appliance insulation, welding equipment nozzle insulation, heat barriers and specialty bearing applications. The fine weave fabric substrate provides a “finer” finish on the surface of the finished part. RT507F also complies with MIL-I-24768/17, Type GSG and ASTM D709 Type IV Grade G-7.

128-26 is a pourable, thermally conductive, silicone adhesive and potting compound suitable for application by stamping, screen printing, stencil printing, and syringe dispensing. This product features excellent adhesion to Kynar, Kapton, Mylar, glass, and a variety of other surfaces and is very resistant to flexing and creasing. Some applications for 128-26 include but are not limited to potting and encapsulation of stress-sensitive components, thermal management, and low-stress bonding applications.Features One Component thermally conductive heat cured adhesive.

VMQ 50 B 3 M1 Silicone rubber is a high-performance elastomer that is ideal for high and low-temperature applications. Silicone Rubber’s unique structure provides material flexibility, and it is consistent over a wide range of temperatures thanks to its chemical characteristics.The unique structure of silicones provides material flexibility which is consistent over a wide range of temperaturesMain advantages of silicone rubber are its combined chemical and heat resistanceSilicones offer a typical working temperature ranging from -60°C up to +250°CThe electrical properties of silicone are excellentIts resistance to weathering and ozone attack is outstanding

114-26 B is a medical grade, electrically conductive, polymer coated polyester film composition. It is typically used as a component for fabricating electrodes in medical testing applications. This product has been formulated to have improved conductivity and high electrical dissipation properties. Some added applications for 114-26 B include, but are not limited to, emi/rfi shielding, polymer thick film circuitry, membrane switches and electrical static dissipation. 114-26 B is available in rolls ranging in widths up to 20 inches and lengths up to 2000 feet.

117-33 is a flexible, electrically conductive, silicone pressure sensitive adhesive. The overall balance of peel strength, cohesion, lap shear strength and high temperature holding power provides a versatility that makes this product useful in a wide range of fastening and bonding applications. This product is very resistant to flexing and creasing. Some applications for 117-33 include, polymer thick film circuitry, and electrical attachments for stress sensitive devices. 117-33 is one of the few conductive adhesives that can bond to silicone substrates and surfaces. In addition, it can be bonded to some types of Teflon® surfaces.Features High-temperature flexible conductive adhesive

Nanoxo Quantsil is an innovative quantum dots containing silicone-based clear and transparent elastomer possessing luminescent and UV filter properties. Quantsil is supplied as a two-part set i.e., the base elastomer (component A) and the curing agent (component B).

VMQ 50 N 3 M1 Silicone rubber is a high-performance elastomer that is ideal for high and low-temperature applications.The unique structure of silicones provides material flexibility which is consistent over a wide range of temperaturesMain advantages of silicone rubber are its combined chemical and heat resistanceSilicones offer a typical working temperature ranging from -60°C up to +250°CThe electrical properties of silicone are excellentIts resistance to weathering and ozone attack is outstanding

VMQ 60 B 3 M1 Silicone rubber is a high-performance elastomer that is ideal for high and low-temperature applications.The unique structure of silicones provides material flexibility which is consistent over a wide range of temperaturesMain advantages of silicone rubber are its combined chemical and heat resistanceSilicones offer a typical working temperature ranging from -60°C up to +250°CThe electrical properties of silicone are excellentIts resistance to weathering and ozone attack is outstanding

VMQ 75 B 3 M Silicone rubber is a high-performance elastomer that is ideal for high and low-temperature applications.The unique structure of silicones provides material flexibility which is consistent over a wide range of temperaturesMain advantages of silicone rubber are its combined chemical and heat resistanceSilicones offer a typical working temperature ranging from -60°C up to +250°CThe electrical properties of silicone are excellentIts resistance to weathering and ozone attack is outstanding

Grade RT507 has good electrical properties under humid conditions, superior heat resistance, and superior arc resistance. Typical applications include heating appliance insulation, welding equipment nozzle insulation, heat barriers and specialty bearing applications. RT507 also complies with MIL-I-24768/17, Type GSG and ASTM D709 Type IV Grade G-7.

CGSTAPE - 1159 is a 5 mil skived PTFE film backing with an silicone pressure sensitive adhesive.

102-32D is a flexible, electrically conductive, silicone-based ink and adhesive. The overall balance of peel strength, cohesion, lap shear strength and high temperature holding power provides a versatility that makes this product useful in a wide range of fastening and bonding applications. This product is very resistant to flexing and creasing. Some applications for 102-32D include, but are not limited to, emi/rfi shielding of polyimide flexible circuits, polymer thick film circuitry, and electrical attachments for stress sensitive devices. 102-32D is one of the few conductive adhesives that can bond to silicone substrates and surfaces. In addition, it can be bonded to some types of Teflon® surfaces.Features Excellent Bonding to Difficult Surfaces. High Temperature Resistance. Wide Range of Applications.

102-32G1 is a flexible electrically conductive silicone adhesive. 102-32G1 features the highest degree of thermal and mechanical reliability over any other conductive adhesive technology and provides no failures during thermal cycling, heat aging, shocking or vibration due to the reliability from the elasticity of theproduct. Some applications for 102-32G1 include, but are not limited to, elastomeric conductive bridging and bonding, conductive bonding of low surface energy materials, conductive via filling and electrical attachments for stress sensitive devices. 102-32G1 is one of the few conductive adhesives that can bond to silicone substrates and surfaces. In addition, it can be bonded to some types of Teflon® surfaces. 102-32G1 features better conductivity than 102-32 when cured at lower temperatures