Products in Devices & Assemblies: Silicones

Cuyahoga Plastics S-4900 is a glass & mineral-filled Silicone Thermoset molding compound designed for components requiring extreme high temperature performance.

102-32G1 is a flexible electrically conductive silicone adhesive. 102-32G1 features the highest degree of thermal and mechanical reliability over any other conductive adhesive technology and provides no failures during thermal cycling, heat aging, shocking or vibration due to the reliability from the elasticity of theproduct. Some applications for 102-32G1 include, but are not limited to, elastomeric conductive bridging and bonding, conductive bonding of low surface energy materials, conductive via filling and electrical attachments for stress sensitive devices. 102-32G1 is one of the few conductive adhesives that can bond to silicone substrates and surfaces. In addition, it can be bonded to some types of Teflon® surfaces. 102-32G1 features better conductivity than 102-32 when cured at lower temperatures

102-32D is a flexible, electrically conductive, silicone-based ink and adhesive. The overall balance of peel strength, cohesion, lap shear strength and high temperature holding power provides a versatility that makes this product useful in a wide range of fastening and bonding applications. This product is very resistant to flexing and creasing. Some applications for 102-32D include, but are not limited to, emi/rfi shielding of polyimide flexible circuits, polymer thick film circuitry, and electrical attachments for stress sensitive devices. 102-32D is one of the few conductive adhesives that can bond to silicone substrates and surfaces. In addition, it can be bonded to some types of Teflon® surfaces.Features Excellent Bonding to Difficult Surfaces. High Temperature Resistance. Wide Range of Applications.

CGSTAPE - 1159 is a 5 mil skived PTFE film backing with an silicone pressure sensitive adhesive.

Grade RT507 has good electrical properties under humid conditions, superior heat resistance, and superior arc resistance. Typical applications include heating appliance insulation, welding equipment nozzle insulation, heat barriers and specialty bearing applications. RT507 also complies with MIL-I-24768/17, Type GSG and ASTM D709 Type IV Grade G-7.

LIM™ 6030 liquid silicone rubber is a 2-component product formulated for use in liquid injection molding to high performance elastomeric parts. It is clear, but easily pigmentable with Momentive masterbatch colors. The combination of excellent tear strength and very high tensile strength makes this product suitable for a wide variety of applications. Mechanical parts such as connector inserts, seals, flexible mounts, and valve parts can be made readily from LIM 6030 liquid silicone rubber.Key Features and Benefits High clarity for excellent visibility Excellent tear strength Convenient 1:1 mix ratio for use with automatic equipment Rapid cure time: 10 to 40 seconds depending upon part size, configuration, and molding temperature Wide range of molding temperatures: 150°C (302°F) to 205°C (400°F) Excellent release from metal molds Potential Applications sports goggles and masks health care equipment camera parts coating metal rolls.

Silopren™ LSR 2750 TP 3824 is a two-component liquid silicone rubber for injection molding, which offers primer-less adhesion to a wide range of substrates including metals and engineering plastics, but without adhesion to the mold. Full bond strength is reached after a short post cure (e.g. 1 h at 100°C) or by longer storage at room temperature. This makes Silopren™ LSR 2750 TP 3824 the optimal choice for cost-efficient manufacturing of high numbers of articles in integrated processes such as multi-component injection molding or insert-molding.Key Features and Benefits Primer-less adhesion to many substrates No special mold treatment needed: Final adhesion builds up with time High temperature stability Excellent stability and flexibility at low temperatures Outstanding aging behavior and weathering resistance Good dielectric and mechanical properties Easy pigmentable due to translucent color Potential ApplicationsSilopren™ LSR 2750 TP 3824 is particularly suitable for the manufacturing of parts, where engineering plastics and elastomeric materials need to be combined in an overmoulding or co-molding process such as sealing elements, automotive connectors, membranes, vibration dampening elements, etc. Parts made from Silopren™ LSR 2750 TP 3824 can generally be used in technical applications without post-cure, but do not comply with regulations applicable for parts, which are intended for the pharmaceutical or food industry.

LightSpan® LS-6943 is a optical thermoset.

LightSpan® LS-6941 is a optical thermoset.

Flextein™ SEA2010 is a two-component thermally conductive RTV silicone sealant for insulating and protecting electrical and electronic components from application and environmental stresses. This rubber-like compound resists shock and vibration, intended for exclusion of moisture and corrosive agents. High conductivity makes FlexteinTM SEA2007 suitable for electronic components or packaging requiring heat dissipation while sealed.

Shinepoly® LP2082 modifier has crosslinked silicone and butyl-acylate copolymer core with grafted poly-methyl methacrylate shell. It provides superior low temperature impact performance and weatherability with minimum affect on flame retardant performance of PC.

Greasil 9000 is a stiff water repellent non-melting silicone grease lubricant.

LIM™ 6061 is the next generation in 60-durometer liquid silicone rubber. It is a two-component product formulated for use in liquid injection molding to produce high performance parts. It is clear, but easily pigmentable with Momentive masterbatch colors. The combination of excellent tear strength and very high tensile strength makes this product suitable for a wide variety of applications. Mechanical parts such as connector inserts, seals, flexible mounds, and valve parts can be made readily from LIM6061 liquid silicone rubber.Key Features and Benefits High clarity for excellent visibility Excellent tear strength Convenient 1:1 mix ratio for use with automatic equipment Rapid cure time: 10 to 40 seconds depending upon part size, configuration and molding temperature Wide range of molding temperatures: 150°C (302°F) to 232°C (450°F) Excellent release from metal molds High Bayshore resilience Potential Applications sports goggles and masks health care profiles camera parts coating metal rolls.

MAST Technologies MR21-0012-20 is a thin magnetically loaded sheet stock with loss at microwave frequencies while retaining the desirable properties of elastomeric binders. Cavity Resonance Absorbers are designed to have a high loss and are intended to be applied to metal surfaces inside microwave cavities to reduce the cavity's Q. Cavity Resonance Absorbers attenuate energy at normal and high angles of incidence at frequencies ranging from 1 GHz to 20 GHz. The most common elastomer is silicone, but other elastomer formulations are available.

MAST Technologies MR21-0002-01 is used for Resonant Cavity Attenuation, EMI Reduction, Rx/Tx Antenna Isolation, System Isolation, High Frequency Interference, Inside a Shielding Can, and Specular Return (RCS).

Si-TPV® 3300-75A is a patented dynamic vulcanizated thermoplastic Silicone-based elastomers which made by a special compatible technology , it helps silicone rubber dispersed in TPU evenly as a 2~3 micron droplets under microscope . This unique material provides a good combination of properties and benefits from thermoplastics and fully cross-linked silicone rubber. Suits for wearable device surface, Phone bumper ,Electronic devices accessories ( earbuds ,eg ), overmolding , artificial leather, Automotive, high-end TPE, TPU industries ....

LightSpan® LS2-6140 is a optically clear primerless silicone encapsulant.

Flame-retardant V-0, UL746C: f1

LightSpan® LS-3140 is from LEDs to fiber optics, NuSil Technology's LightSpan™ brand product line delivers the most comprehensive line of refractive index matching adhesives, encapsulants and thermosets available.The benefits of silicone include the following: Thermal Stability Low Ionic Species Maintain Optical Clarity (90% minimum @ 400nm) Low Moisture Absorption (<0.4%) Optimization for UV Resistance Adjustable Cure Low Outgassing Low Shrinkage, <1% Low Modulus: Stress reduction for bonding materials with different coefficients of thermal expansion Gernal Purpose: Optical GelsComments: Low Volatility, Penetration 0.4 mm, non-phenyl containing.

LIM™ 6050-D2 liquid silicone rubber is a 2-component product formulated for use in liquid injection molding to high performance elastomeric parts. It is clear, but easily pigmentable with Momentive Performance Materials masterbatch colors. LIM6050-D2 offers convenient 1:1 mix ratio, high tear strength, and easy release from molds. Cure time is rapid, generally 10 to 40 seconds (@ 150-205°C) depending upon part size, configuration, and molding temperature.Key Features and BenefitsLIM6050-D2 liquid silicone rubber is distinguished by the following properties: High clarity for excellent visibility Excellent tear strength Convenient 1:1 mix ratio for use with automatic equipment Rapid cure time: 10 to 40 seconds depending upon part size, configuration, and molding temperature Wide range of molding temperatures: 150°C (302°F) to 205°C (400°F) Excellent release from metal molds Potential ApplicationsThe combination of excellent clarity, tear strength and very high tensile strength makes this product suitable for a wide variety of applications. Baby bottle nipples Connector inserts Seals Flexible mounts Valves Sports goggles Masks Health care equipment Camera parts Coating metal rolls.

Flextein™ SEA2015 is a two-component thermally conductive RTV silicone sealant for insulating and protecting electrical and electronic components from application and environmental stresses. This rubber-like compound resists shock and vibration, intended for exclusion of moisture and corrosive agents.

White Ice 510 is a non-reactive, Silicone, Thermally Conductive Grease with a high thermal conductivity and low thermal resistance with a soft, non-flowable and screen printable consistency. This product is formulated with specialty binding agents to achieve lowest amount of bleed and evaporations. It is designed for applications where a silicone thermal interface material is required and where the device may later need to be easily removed from the heat sink. This compound is ideally suited for use in thin cross-sectional thicknesses down to one mil.

LightSpan® LS2-6941 is a optically clear silicone elastomer.

Sircon SPG-20B has a high heat transfer / heat dissipation effect because it has good followability to the gap and high adhesion.

Tarflon® RC2041 by Idemitsu Chemicals is comprised of Polycarbonate and Siloxane polymer. It is commonly used for a variety of applications. .

P & P Technology Silver Copper Loaded Silicone EC-H is a silicone elastomer with Silver conductivefiller. It is tan in color.

Sil-Flex SL RTV-7525 (Neutral) is a self-leveling one component, low modulus, neutral cure silicone sealant and adhesive. When fully cured, this unique VOC compliant formula offers UV stability and tenacious adhesion. It is frequently used for coating electronic components and terminals or sealing pitch pockets and window seams. This product is specifically formulated to offer all weather performance to meet today's Green Building Standards.

Tovo Gomma SIL 200 is a rubber compound which is white in color and has silicone composition.

White Ice 510CR is a Thixotropic, No-Sag, and No-Drip type non-reactive Thermally Conductive Silicone Grease with a high thermal conductivity and low thermal resistance. This product is formulated with specialty binding agents to achieve lowest amount of bleed/pump out and evaporations. It is specially designed for vertical applications with vibration and large gap. Offers excellent stability over wide temperature ranges. Easy to apply by dispensing or screen print/Stencil.

Silplus™ 30 AS, 30 duro hardness heat cured silicone rubber compound for compression molding processes, offers a good anti-static property to silicone rubber products.Key Features and Typical Benefits Good anti-static property Colorable translucent appearance Excellent mechanical properties and heat resistance Excellent processability Easy coloring Potential Applications Mobile jacket, keypad cover, keypad watch Consumer goods, novelty, accessory Industry roller, rubber sheet Automobile parts.

MAST Technologies MR21-0001-01 has the characteristics of The tough material can withstand outdoor exposure. Extremely thin for tight quarters. A flexible elastomeric material will not crack. Support a wide frequency range RoHS/REACH Compliant, Halogen-Free.

MAST Technologies MR21-0012-00 is a thin magnetically loaded sheet stock with loss at microwave frequencies while retaining the desirable properties of elastomeric binders. Cavity Resonance Absorbers are designed to have a high loss and are intended to be applied to metal surfaces inside microwave cavities to reduce the cavity's Q. Cavity Resonance Absorbers attenuate energy at normal and high angles of incidence at frequencies ranging from 1 GHz to 20 GHz. The most common elastomer is silicone, but other elastomer formulations are available.

Robbins Rubber Silicone Rubber Sheets have been popularly used in automotive, food handling, electronic, medical, and construction applications, among others. This is primarily because silicone rubber has a broad working temperature range that allows it to handle both high and low extreme temperatures. It is a talc-free powder.

Robbins Rubber Silicone Rubber Strips are popular use in automotive, food handling, electronic, medical, and construction applications, among others. This is primarily because silicone rubber has a broad working temperature range that allows it to handle both high and low extreme temperatures.

NuSil™ CF2-3521 is a fluorosilicone elastomer.

NuSil™ CF19-2615 is optically clear potting and encapsulating silicone elastomer. To provide protection of electronic components and assemblies against shock, vibration, moisture, ozone, dust, chEMIcals and other environmental hazards by potting or encapsulating.