Products in Devices & Assemblies: Filler

LITHOS Talc LP is a highly lamellar, very soft talc with a huge aspect ratio. This is realized by a specific delaminating process which creates the optimal lamellar structure without breaking the plates in smaller parts. Furthermore it is equipped with extraordinary whiteness and thereby suitable for applications of the highest quality, in plastic, paper and the coating industry.

HeBoFill® LL-SP 050 is a Boron Nitride powder with good crystallinity and a narrow grain size distribution. Its fine particle size and low agglomerate content makes it suitable for a wide variety of applications.

HeBoFill® CL-SP 045 is a pure Boron Nitride powder with a coarse grain size distribution. Its average particle size is 45 μm. The extremely low specific surface area allows high filler loadings with a minimum viscosity increase. It is particularly suitable as a filler in polymers, allowing the thermal conductivity to be increased without affecting the electrically insulating properties.

The LKB-series of LITHOS solely includes talc products based on high quality resources. To offer applications in numerous areas, LITHOS manufactures a variety of different products.

The LKB-series of LITHOS solely includes talc products based on high quality resources. To offer applications in numerous areas, LITHOS manufactures a variety of different products.

LITHOS Talc LPP is highly lamellar, very soft talc with good aspect ratio. This is realized by a specific delaminating process, which creates best lamellar structure instead of breaking the plates in smaller parts. Products with a top cut to 10 microns and respectively median particle sizes of 2 microns are realised.

LITHOS Talc LPP is highly lamellar, very soft talc with good aspect ratio. This is realized by a specific delaminating process, which creates best lamellar structure instead of breaking the plates in smaller parts. Products with a top cut to 10 microns and respectively median particle sizes of 2 microns are realised.

HeBoFill® CL-SP 009 is a pure boron nitride powder with high crystallinity and an average particle size of 9 μm. Due to the pronounced platelet structure and the low specific surface area, this powder is very well suited as a filler and additive for plastics, as well as for a wide range of other applications.

LITHOS Talc LP is a highly lamellar, very soft talc with a huge aspect ratio. This is realized by a specific delaminating process which creates the optimal lamellar structure without breaking the plates in smaller parts. Furthermore it is equipped with extraordinary whiteness and thereby suitable for applications of the highest quality, in plastic, paper and the coating industry.

The LKB-series of LITHOS solely includes talc products based on high quality resources. To offer applications in numerous areas, LITHOS manufactures a variety of different products.

LITHOS Talc LPP is highly lamellar, very soft talc with good aspect ratio. This is realized by a specific delaminating process, which creates best lamellar structure instead of breaking the plates in smaller parts. Products with a top cut to 10 microns and respectively median particle sizes of 2 microns are realised.

LITHOS Talc LPP is highly lamellar, very soft talc with good aspect ratio. This is realized by a specific delaminating process, which creates best lamellar structure instead of breaking the plates in smaller parts. Products with a top cut to 10 microns and respectively median particle sizes of 2 microns are realised.

HeBoFill® CL-ADM 020 is a Boron Nitride powder with a high level of purity, high crystallinity and excellent free flowing characteristics. It is particularly suitable for use as filler and additive in polymer materials to improve their thermal conductivity.

LITHOS Talc LP is a highly lamellar, very soft talc with a huge aspect ratio. This is realized by a specific delaminating process which creates the optimal lamellar structure without breaking the plates in smaller parts. Furthermore it is equipped with extraordinary whiteness and thereby suitable for applications of the highest quality, in plastic, paper and the coating industry.

LITHOS Talc LP is a highly lamellar, very soft talc with a huge aspect ratio. This is realized by a specific delaminating process which creates the optimal lamellar structure without breaking the plates in smaller parts. Furthermore it is equipped with extraordinary whiteness and thereby suitable for applications of the highest quality, in plastic, paper and the coating industry.

LITHOS Talc LP is a highly lamellar, very soft talc with a huge aspect ratio. This is realized by a specific delaminating process which creates the optimal lamellar structure without breaking the plates in smaller parts. Furthermore it is equipped with extraordinary whiteness and thereby suitable for applications of the highest quality, in plastic, paper and the coating industry.

LITHOS Talc LP is a highly lamellar, very soft talc with a huge aspect ratio. This is realized by a specific delaminating process which creates the optimal lamellar structure without breaking the plates in smaller parts. Furthermore it is equipped with extraordinary whiteness and thereby suitable for applications of the highest quality, in plastic, paper and the coating industry.

LITHOS Talc LP is a highly lamellar, very soft talc with a huge aspect ratio. This is realized by a specific delaminating process which creates the optimal lamellar structure without breaking the plates in smaller parts. Furthermore it is equipped with extraordinary whiteness and thereby suitable for applications of the highest quality, in plastic, paper and the coating industry.

LITHOS Talc LP is a highly lamellar, very soft talc with a huge aspect ratio. This is realized by a specific delaminating process which creates the optimal lamellar structure without breaking the plates in smaller parts. Furthermore it is equipped with extraordinary whiteness and thereby suitable for applications of the highest quality, in plastic, paper and the coating industry.

HeBoFill® CL-SP 035* is a high-purity boron nitride powder with a very distinct crystal structure and single crystallites in the range of 35 pm. It is further characterized by its low density and intrinsic high thermal conductivity. Since large crystallites conduct heat much faster, it is predestined for use as a filler and additive in plastics. Thereby, their thermal conductivity is significantly increased, while simultaneously maintaining good electrical insulation.

The LKB-series of LITHOS solely includes talc products based on high quality resources. To offer applications in numerous areas, LITHOS manufactures a variety of different products.

Karntner Montanindustrie HAR 60 is a calcium inosilicate mineral (CaSiO3) that may contain small amounts of iron, magnesium, and manganese substituting for calcium.

3N International S90H is a filler masterbatch made from very fine, chopped EMl-ShieldTM stainless steel fibers and polyester, used as additives in ABS, EVA, NYLON, PC, PE, PA, PBT, PET, PPS, PPOS, and ABS to produce conductive plastics. Conductive plastics are new functional plastics that have the properties of anti-static and anti-electromagnetic interference, etc. Conductive plastics are widely used in making anti-static casing and sheathing in electronics and micro-electronic components in communications equipment, medical devices, and specialized products for the petrochemical, military, automobile, and aerospace industries.

3N International L8H is a filler masterbatch made from very fine, chopped EMl-ShieldTM stainless steel fibers and polyester, used as additives in ABS, EVA, NYLON, PC, PE, PA, PBT, PET, PPS, PPOS, and ABS to produce conductive plastics. Conductive plastics are new functional plastics that have the properties of anti-static and anti-electromagnetic interference, etc. Conductive plastics are widely used in making anti-static casing and sheathing in electronics and micro-electronic components in communications equipment, medical devices, and specialized products for the petrochemical, military, automobile, and aerospace industries.

Karntner Montanindustrie Micro 12H is a calcium inosilicate mineral (CaSiO3) that may contain small amounts of iron, magnesium, and manganese substituting for calcium.

Karntner Montanindustrie Wollastonite LAR 230# is a calcium inosilicate mineral (CaSiO3) that may contain small amounts of iron, magnesium, and manganese substituting for calcium.

3N International S14WJ is a filler masterbatch made from very fine, chopped EMl-ShieldTM stainless steel fibers and polyester, used as additives in ABS, EVA, NYLON, PC, PE, PA, PBT, PET, PPS, PPOS, and ABS to produce conductive plastics. Conductive plastics are new functional plastics that have the properties of anti-static and anti-electromagnetic interference, etc. Conductive plastics are widely used in making anti-static casing and sheathing in electronics and micro-electronic components in communications equipment, medical devices, and specialized products for the petrochemical, military, automobile, and aerospace industries.

AgriFi™ a hydrophobic fiber, provides a number of physical property benefits to products and lowers costs. It's less than carbon neutral, half the density of mineral fillers and allows for exact control of properties. Our thermal mechanical treatment process technologies address all the off-gassing and moisture issues associated with natural fiber polymer fillers by removing the extractives without compromising the integrity of the cellulose and hemicellulose structures of the remaining fibers.

3N International L8WH is a filler masterbatch made from very fine, chopped EMl-ShieldTM stainless steel fibers and polyester, used as additives in ABS, EVA, NYLON, PC, PE, PA, PBT, PET, PPS, PPOS, and ABS to produce conductive plastics. Conductive plastics are new functional plastics that have the properties of anti-static and anti-electromagnetic interference, etc. Conductive plastics are widely used in making anti-static casing and sheathing in electronics and micro-electronic components in communications equipment, medical devices, and specialized products for the petrochemical, military, automobile, and aerospace industries.

Karntner Montanindustrie Micro 12 is a calcium inosilicate mineral (CaSiO3) that may contain small amounts of iron, magnesium, and manganese substituting for calcium.

PowerFill™ is a nickel coated graphitized fiber bundle having a random irregular shape as seen below. The base material is composed of graphite fiber/graphitized resin bundles commonly known in industry as WonderFill. The base material is 99.999% pure graphite having a 1.76 g/cc material density. These fiber bundles are uniformly coated with a thin layer of nickel (nominally 60% by weight) to form a cost effective polymer additive suitable for EMI / RFI shielding applications and high thermal/electrical conductivity applications.

Karntner Montanindustrie Submicro 2-10 is a calcium inosilicate mineral (CaSiO3) that may contain small amounts of iron, magnesium, and manganese substituting for calcium.

3N International S14J is a filler masterbatch made from very fine, chopped EMl-ShieldTM stainless steel fibers and polyester, used as additives in ABS, EVA, NYLON, PC, PE, PA, PBT, PET, PPS, PPOS, and ABS to produce conductive plastics. Conductive plastics are new functional plastics that have the properties of anti-static and anti-electromagnetic interference, etc. Conductive plastics are widely used in making anti-static casing and sheathing in electronics and micro-electronic components in communications equipment, medical devices, and specialized products for the petrochemical, military, automobile, and aerospace industries.

3N International S90M is a filler masterbatch made from very fine, chopped EMl-ShieldTM stainless steel fibers and polyester, used as additives in ABS, EVA, NYLON, PC, PE, PA, PBT, PET, PPS, PPOS, and ABS to produce conductive plastics. Conductive plastics are new functional plastics that have the properties of anti-static and anti-electromagnetic interference, etc. Conductive plastics are widely used in making anti-static casing and sheathing in electronics and micro-electronic components in communications equipment, medical devices, and specialized products for the petrochemical, military, automobile, and aerospace industries.

Karntner Montanindustrie Micro 8 is a calcium inosilicate mineral (CaSiO3) that may contain small amounts of iron, magnesium, and manganese substituting for calcium.

Karntner Montanindustrie Wollastonite LAR 325# is a calcium inosilicate mineral (CaSiO3) that may contain small amounts of iron, magnesium, and manganese substituting for calcium.