Products in Lighting: Polyamides

LNP KONDUIT PX10323H compound is based on Nylon 6 resin containing glass fiber. Added features of this grade include: Thermally Conductive and Healthcare.

LNP LUBRICOMP RFL36XXY compound is based on Nylon 6/6 resin containing 30% glass fiber, 15% PTFE. Added features of this grade include: Wear Resistant.

SABIC's Specialties Business LNP KONDUIT PX11313 compound is based on Nylon 6 resin containing mineral and glass fiber. Added features of this grade include: Thermally Conductive, Electrically Insulative and Non-Brominated, Non-Chlorinated Flame Retardant.

SABIC's Specialties Business LNP KONDUIT PX11311 compound is based on Nylon 6 resin containing mineral and glass fiber. Added features of this grade include: Thermally Conductive, Electrically Insulative and Non-Brominated, Non-Chlorinated Flame Retardant.

SABIC's Specialties Business LNP KONDUIT PX13012 compound is based on Nylon 6 resin containing proprietary thermal filler. Added features of this grade include: Thermally Conductive, Electrically Insulative and Non-Brominated, Non-Chlorinated Flame Retardant. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

SABIC's Specialties Business LNP KONDUIT PX13322 compound is based on Nylon 6 resin containing mineral and glass fiber. Added features of this grade include: Thermally Conductive, Electrically Insulative and Non-Brominated, Non-Chlorinated Flame Retardant. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

SABIC's Specialties Business LNP KONDUIT PX11311U compound is based on Nylon 6 resin containing mineral and glass fiber. Added features of this grade include: Thermally Conductive, Electrically Insulative, Improved UV Stability and Non-Brominated, Non-Chlorinated Flame Retardant.

Aegis® H85WC01 resin is a medium-high viscosity, heat stabilized, nylon 6 jacket compound for use in wire, cable, flexible lighting and plenum applications. It provides excellent performance across the range of THHN, THWN and TFFN constructions along with a well-balanced set of properties, including low fuming, high toughness, abrasion resistance, and excellent resistance to gasoline, oil and other hydrocarbons.

Aegis® H55WC01 is a medium viscosity, heat stabilized, nylon 6 universal wire jacket compound providing excellent performance across the range of THHN, THWN and TFFN constructions. It also offers a well-balanced set of properties including flexibility, toughness, abrasion resistance and excellent resistance to gasoline, oil and other hydrocarbons. Aegis® H55WC01 nylon compound has been investigated in accordance with the test methods outlined in ANSI/UL 1581 and ANSI/UL 83 and is certified under UL QMTT2 for use in wire, cable and flexible lighting products.

Aegis® H55WCX resin is a medium-viscosity, heat stabilized, nylon 6 universal wire jacket compound that provides excellent performance across a range of THHN, THWN and TFFN constructions. It offers well-balanced features including flexibility, toughness, abrasion resistance, and superior resistance to gasoline, oil and other hydrocarbons.

SABIC's Specialties Business LNP KONDUIT PX10323 compound is based on Nylon 6 resin containing glass fiber and proprietary thermal filler. Added features of this grade include: Thermally Conductive. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

MOCOM Compounds ALTECH® ECO PA66 2030/510 GF30 IM is a polyamide 66 injection molding grade with 30% glass fibers, heat-stabilized, impact-modified, and easy-release (demolding). It is suitable for various market segments such as lighting and domestic appliances. Pre-drying conditions should be 80°C in a dry air (desiccant) dryer for 2-12 hours depending on moisture content, with a maximum moisture content of 0.15%. Processing injection molding requires a melt temperature of 280-300°C and a mold temperature of 80-120°C.

MOCOM Compounds ALTECH® PA6 A 1000/126.01 UV is a heat and UV stabilized polyamide 6 base polymer suitable for injection molding. It is suitable for lighting fixtures/fittings and exterior applications such as housings and fans. It should be stored in a dry and light-protected environment, not exceeding 30°C.

MOCOM Compounds ALTECH® PA6 A 4030/109 MR30 is a Polyamide 6 grade containing a 30% mineral filler/additive system and heat stabilized for improved flow characteristics during injection molding. It is suitable for a wide range of automotive, machinery, electrical and electronic, furniture, building and construction, sport and leisure, packaging, medical/personal care, lighting, and information technology applications. Typical applications include racking/shelving, airbag components, batteries, fixing elements, power drills, clips, roof boxes and more. Processing conditions should include a melt temperature of 270-290°C and a mold temperature of 80-100°C for optimal performance, while pre-drying conditions should include 80°C in a dry air (dessiccant) dryer for 2-12 hours, depending on the moisture content.

Yuyao Zhongfa Engineering Plastics PA FRML is Flame-Retardant Masterbatch of PA6 or PA66 which has good mechanical properties, aging resistance, thermal stability and good processibility, etc. after adding the master. and the flame retardant grade could be changed from UL-94, V0, V1, V2 to HB. The mixture of flame-retardant masterbatch and PA6 can replace flame-retardant PA6 to decrease production cost, so does PA66 and can be used for household electric appliance parts, low voltage electrical apparatus, air switch, electric plug-in unit, communications equipment's, lighting luminaire, luminaire ,mining electric apparatus parts, etc.

TECACOMP PA66 TC gray 4057 is a Polyamide 66 (PA 66) polymer.

TECACOMP PA66 TC gray 3974 is a Polyamide 66 (PA 66) polymer. It is processed by using injection molding.

CP-Polymer Technik Wellamid® MR410 42H-N is a Polyamide 6 (Nylon 6) material filled with 40% mineral. It is available in Asia Pacific, Europe, Latin America, or North America for injection molding.Typical application of Wellamid® MR410 42H-N: Automotive

TECACOMP PA66 TC gray 4081 is a Polyamide 66 (PA 66) reinforced with mineral. It is suitable for injection molding.

CP-Polymer Technik Wellamid® MR409 22H-N is a Polyamide 66 (Nylon 66) material filled with 40% mineral. It is available in Asia Pacific, Europe, Latin America, or North America for injection molding. Primary attribute of Wellamid® MR409 22H-N: Flame Rated.Typical application of Wellamid® MR409 22H-N: Automotive

CP-Polymer Technik Wellamid® MRGF25/15 42H-N is a Polyamide 6 (Nylon 6) material filled with 40% glass\mineral. It is available in Asia Pacific, Europe, Latin America, or North America for injection molding.Typical application of Wellamid® MRGF25/15 42H-N: Automotive

Next Nylon 66 Industrial Series PX-02ABK isPA66 UnFilled Black Compound.

CP-Polymer Technik Wellamid® MRGF25/15 22H-N is a Polyamide 66 (Nylon 66) material filled with 40% glass\mineral. It is available in Asia Pacific, Europe, Latin America, or North America for injection molding. Primary attribute of Wellamid® MRGF25/15 22H-N: Flame Rated.Typical application of Wellamid® MRGF25/15 22H-N: Automotive

Wellman Engineering Resins EcoLon® MRGF1518-BK is a Polyamide 66 (Nylon 66) material filled with 38% glass\mineral. It is available in Asia Pacific, Europe, Latin America, or North America for injection molding. Primary attribute of EcoLon® MRGF1518-BK: Eco-Friendly/Green.Typical application of EcoLon® MRGF1518-BK: Automotive

Mineral / Glass Reinforced Nylon Resin (PA66)

CP-Polymer Technik Wellamid® MRGF30/10 42H-N is a Polyamide 6 (Nylon 6) material filled with 40% glass\mineral. It is available in Asia Pacific, Europe, Latin America, or North America for injection molding. Primary attribute of Wellamid® MRGF30/10 42H-N: Flame Rated.Typical application of Wellamid® MRGF30/10 42H-N: Automotive

Grunstoff Kunststoff-Recycling PA (Polyamide) have replaced many metal parts in automotive construction, which is where they are most used. The plastics are largely made into fibers. They are one of the most important types of Thermoplastics. The tough materials are highly stable and rigid, have a high impact strength and low wear and tear.