Products in Other Devices & Assemblies: Polyamides

Aegis® H8202NL resin is a 2.6 RV, unfilled, low/medium viscosity, non-lubricated, nylon 6 homopolymer. It combines good strength, stiffness and toughness with excellent heat, chemical and abrasion resistance.

Aegis® H8202NLB is an unfilled, low/medium viscosity, non-lubricated nylon 6 injection molding homopolymer exhibiting excellent melt fluidity for filling thin sections. It exhibits good strength, stiffness and toughness as well as excellent heat, chemical and abrasion resistance.

Aegis® PIR-H8202NLB resin from AdvanSix contains 100% post-industrial recycled (PIR) raw materials while providing the same top performance and processability as Aegis® H8202NLB, its standard, non-recycled counterpart.Aegis® PIR-H8202NLB resin is an unfilled, low/medium viscosity, non-lubricated, nylon 6 homopolymer. It exhibits good strength, stiffness, and toughness as well as excellent heat, chemical and abrasion resistance.

Aegis® PIR-H35ZI resin from AdvanSix contains 100% post-industrial recycled (PIR) raw materials while providing the same top performance and processability as Aegis® H35ZI, its standard, non-recycled counterpart.Aegis® PIR-H35ZI resin is an unfilled, low viscosity, non-lubricated nylon 6 injection molding homopolymer exhibiting excellent melt flow properties for filling thin sections and reduced cycle times. Aegis® PIR-H35ZI homopolymer exhibits good strength, stiffness and toughness as well as excellent heat, chemical and abrasion resistance.

Aegis® H35ZI is an unfilled, low viscosity, non-lubricated nylon 6 injection molding homopolymer exhibiting excellent melt flow properties for filling thin sections and reduced cycle times. It exhibits good strength, stiffness and toughness as well as excellent heat, chemical and abrasion resistance.

Akulon® Ultraflow XG-FKGS6 is a high-performance polyamide 6 and polyamide 66 material trusted worldwide for applications in automotive, electronics, electrical, furniture, and packaging. In molded parts, it delivers an impressive blend of design simplicity and processing ease, along with exceptional mechanical properties across a wide temperature range and diverse conditions. For extrusion, it sets industry benchmarks, featuring remarkable strength, resilience, and ease of processing. This product boasts special features including 30% glass reinforcement, flame retardancy (halogen-free), and being best suited for injection molding.

Akulon® SG-KGS6 is a high-performance material that combines the properties of polyamide 6 and polyamide 66. It is widely used in various industries, including automotive, electronics, electrical, furniture, and packaging. Whether applied in molded parts or extrusion processes, Akulon® SG-KGS6 stands out for its exceptional combination of design flexibility, easy processing, and outstanding mechanical properties. It performs well over a wide temperature range and under diverse conditions.

UL 94 V0 at 0,8 mm, PBDE & PBDF free, good electrical features, hinge effect, GWFI 960/1-2, GWIT 775/1-2.

UL 94 V0, 30 % glass fiber, PBDE & PBDF free, excellent mechanical properties and good electrical features.

Vamp Tech Vampamid™ HT 4026 V0 40% glass fiber reiforced, low water absorption, good mechanicals properties, good electrical features, high chemical resistance and excellent operating temperature, UL 94 V0 at 0.8 mm, GWFI 960/1-2

UL 94 V0, 30% mineral filled, good electrical features, very good dimensional stability.

UL 94 V2, PBDE & PBDF free, good mechanical properties and good electrical features, GWFI 850/1-2 GWIT 775/1-2.

GLAMIDE® T-656E is a Polyamide 66 (Nylon 66) product. It is available in North America.Characteristics include: Flame Rated Wear Resistant

UL 94 V0 at 0,8 mm, PBDE & PBDF free, excellent mechanical properties and good electrical features, GWFI 960/1-2 GWIT 775/1-2.

UL 94 V0, 30% mixed mineral filled and glass fiber, PBDE - PBDF free, good electrical and thermal features.

Vamp Tech Vampamid™ HT3 3028 V0 is 30% glass fiber reinforced, halogen free, low water absorption, good mechanicals properties, good electrical features, high chemical resistance and excellent operating temperature, UL 94 V0 at 0.8 mm, GWFI 960/1-2 GWIT 775/1-2.

UL 94 V0 at 0,8 mm, 25% glass fiber reinforced, very good mechanical properties, CTI 400 V.

Vamp Tech Vampamid™ HT 1526 V0 is 15% glass fiber reiforced, low water absorption, good mechanicals properties, good electrical features, high chemical resistance and excellent operating temperature, UL 94 V0 at 0.8 mm, GWFI 960/1-2

UL 94 V0, halogen and red phosphorus free, excellent mechanical properties and electrical features.

UL 94 V0 at 0,8 mm, 25 % glass fiber, red phosphorus, good mechanical properties.

UL 94 V0, halogen and red phosphorus free, excellent mechanical properties and electrical features.

UL 94 V0, 30% mixed glass fiber and mineral filled, excellent dimensional stability, good thermal and electrical features.

PA 6 reinforced with glass fiber, flame retarded

Tarnamid® T- 30 MHLS is a polyamide 6 UV stabilized to improve resistance against weathering influence.

Badamid® LA70 GF30 by Bada AG is comprised of Polyamide 66. It is commonly used It is available in Granules form.

BARLOG plastics GmbH Kebablend® / RS are special compounds based on different polymers for applications by which radiation is to be shielded. Kebablend® / RS XB 060703/1 PA12 was developed for applications that are intended to shield soft and hard X-rays. Due to their physical properties, the filler systems used are particularly well suited to absorbing or attenuating radiation up to 600 keV. Processing using the injection molding process enables a particular degree of design freedom. Despite the high filler content, Kebablend® / RS XB 060703/1 PA12 has excellent mechanical properties.

CP-Polymer Technik Wellamid® 6600-PA66-GV 20 HWV0CP is a Polyamide 66 (PA 66) polymer. It can be processed using injection molding. Suitable for E&E (Electrical & Electronics) and automotive industry.

Pentamid A GV30 H1 black is a normal viscosity, heat and high oil stabilized polyamide 66, 30% glass fiber reinforced.

Pentamid B GV15 GK15 H natural is a normal viscosity, heat stabilized polyamide 6, 15% glass fiber and 15% glass bead reinforced.

Nilit NILAMID® A3 GF50 TM2 is a Polyamide 66 (Nylon 66) compound, 50% glass fiber reinforced, low wear and friction with molybdenum disulphide.This compound is intended for injection molding.NILAMID® A3 GF50 TM2 is primarily designed for the Industrial and Consumer industry. It is also suitable for Electrical and Electronic or Automotive applications.

Wellamid® 6000 SUVCP by CP-Polymer Technik is comprised of Polyamide 6. It is commonly used It is available in Crystal form.

Armamid™ PA6-4T by Polyplastics Group is comprised of Polyamide 6. It is commonly used It is available in BMC - Bulk Molding Compound form.

Self-lubricating product based on Polyamide 66 (PA66). Molybdenum dysulphide. Glass fibres.

Kolon Industries Kopa® KN1322V0 is a Polyamide 6 (Nylon 6) product. It is available in Asia Pacific, Europe, Latin America, or North America. Characteristics includes flame rated, RoHS compliant and flame retardant halogen free heat resistant.

Badamid® T70 CF30 by Bada AG is comprised of Polyamide 6/6T. It is commonly used It is available in Granules form.