Products in Other Devices & Assemblies: Polyether Ether Ketone (PEEK)

Comco PEEK-ELS EC/Conductive offers excellent mechanical strength, high chemical and hydrolysis resistance as well as high radiation and steam resistance. The continuous operating temperature of PEEK is about 250°C. Thanks to its excellent thermal properties, PEEK is suitable for applications at very high temperatures. Its physical properties remain unaffected by the external environment. It is made of CNT (carbo-nano-tube) PEEK resin. It retains a constant conductivity level between 104 and 106 ohms.

GEHR PEEK® can be used at very high temperatures (about +260 °C) and it shows an extraordinary mechanical strength, toughness, hardness, flexural strength, torsional strength. PEEK exhibits excellent chemical resistance, very good dielectric properties up to +260 °C and a very good resistance to all kinds of radiation (even ultraviolet rays only lead to a slight yellow discolouration). PEEK is self-extinguishing properties according to UL 94.

fluteck™ K308 PEEK is a high performance thermoplastics polymers based on unreinforced Polyetheretherketone (PEEK).

Thermally Conductive Polyetheretherketone, excellent chemical, high stiffness, modulus and HDT.

Semi-crystalline high-performance plastic with targeted improved sliding properties through the addition of solid lubricants. The excellent Properties of pure PEEK are enhanced by the Additives are not adversely affected and remain Receive.

Semi-crystalline high-performance plastic with very good sliding properties and very good mechanical Properties even under thermal stress. In addition, PEEK is characterized by a excellent chemical resistance.

Nemcon™ H-series products are designed for use in high performance electronic assemblies where heat removal is critical to system performance. Nemcon™ H PO DP117/X2 is a thermally conductive polyetheretherketone, offering excellent chemical resistance, good stiffness and high HDT. It should be used in demanding applications where thermal management must be accomplished in harsh environments.

OpteSTAT™ master batches are Ovation Polymers' line of nano-compounds based on carbon nanotubes. Our proprietary dispersion technology debundles and disentangles carbon nanotubes without compromising their integrity. OpteSTAT™ compounds exhibit good conductivity at minimal nanotube loadings, achieving exceptional cleanliness and physical property retention.OpteSTAT™ NC PK 8010 is PEEK-based carbon nanotube compound. The material resistivity can be tailored to the application, while retaining the physical and thermal properties of the base polymer.Target applications include components of disk drives, business machines or other electronic assemblies where ESD control is required while retaining exceptional cleanliness, dimensional control and physical properties.

fluteck™ K303 PEEK is a high performance thermoplastics polymers based on unreinforced Polyetheretherketone (PEEK).

Da/Pro Rubber High Temp Plastics PEEK offer stable physical properties, dimensional stability and characteristics that are ideal for electrical applications that can experience increased temperatures. We work with a variety of materials that fall in the high temperature range and can obtain materials that will assist in flame retardance, wear resistance, conductivity, structural reinforcement available in a variety of colors. While most plastics do not hold up to harsh chemicals, high temperature plastics offer more chemical resistance than most.

fluteck™ K304 PEEK is a high performance thermoplastics polymers based on unreinforced Polyetheretherketone (PEEK).

fluteck™ K301 PEEK is a high performance thermoplastics polymers based on unreinforced Polyetheretherketone (PEEK)

Vertec™ 5020 is a bearing grade carbon fiber reinforced PEEK (polyetheretherketone) material. It offers higher modulus, mechanical strength and resistance to deformation under load than VERTEC 5010. Due to the presence of carbon fibers, thermal conductivity of this material is 3.5 times higher than VERTEC 5000 (unreinforced PEEK), thus it dissipates heat at a faster rate. It also gives stable and reliable ESD performance providing maximum protection from static charge build-up.

GEHR PEEK® MOD (GLIDE) is reinforced with 10 % of each PTFE, graphite and carbonfibre. The very good friction, wear and tear properties makes this material the good choice for many applications with friction.

Nemcon™ H-series products are designed for use in high performance electronic assemblies where heat removal is critical to system performance. Nemcon™ H PA DP117/X3 is a thermally conductive polyetheretherketone, offering excellent chemical resistance, good stiffness and high HDT. It should be used in demanding applications where thermal management must be accomplished in harsh environments.

fluteck™ K300 PEEK is a high performance thermoplastics polymers based on unreinforced Polyetheretherketone (PEEK).