Products in Other Devices & Assemblies: Polyethylenes

Kube PIR 40700 is dense black used for fresnel lenses and windows of PIR motion detectors, thermal imaging cameras and non-contact thermometers.

5502HSUV has a Excellent long-term physical property and impact strength.Excellent environment stress crack resistance (ESCR), water resistance and impact strength by applying hexene comonomer.

Kube PIR 22310 is used for fresnel lenses and windows of PIR motion detectors, thermal imaging cameras and non-contact thermometers.

Kube PIR 22401 is used for fresnel lenses and windows of PIR motion detectors, thermal imaging cameras and non-contact thermometers.

Sylvin™ 6407-83 Black is a CPE alloy compound formulated for electrical molding applications. This compound offers excellent flame resistance characteristics.

Hi-Zex® 530E by Prime Polymers is comprised of High Density Polyethylene. It is commonly used

Partly crystalline thermoplastic material with high toughness and chemical resistance, but lower compared to other plastics mechanical strength. Because of its high molar mass of approx. 4,500,000 g / mol is very good Wear resistance and vibration damping.

Manifattura Cattaneo PE UMW material has a high resistance to chemicals, absorbs little water and has good electrical properties. It is normally used with temperatures between –40 ° C and + 80 ° C and is resistant to water, saline solutions, acids, alkalis, alcohol and petrol. Below 60 ° C PE is insoluble in all organic solvents.

Kube PIR 40702 is low density black/smoky used for fresnel lenses and windows of PIR motion detectors, thermal imaging cameras and non-contact thermometers.

Nano4 BioPE EC 12 is an electrically conductive thermoplastic compound based on bio-polyethylene.

Forlene® HDPE is a special compound, recycled and recyclable, based on high density polyethylene (HDPE), produced and marketed by Forever Plast S.p.A., in national and international market and intended to create plastic products of different kinds of application.

Forlene® HDPE is a special compound, recycled and recyclable, based on high density polyethylene (HDPE), produced and marketed by Forever Plast S.p.A., in national and international market and intended to create plastic products of different kinds of application.

Forlene® HDPE is a special compound, recycled and recyclable, based on high density polyethylene (HDPE), produced and marketed by Forever Plast S.p.A., in national and international market and intended to create plastic products of different kinds of application.

Nemcon™ E-series products are designed for use in ESDA electronic assembly environments where strict control of ESD and cleanliness are critical. Nemcon™ E ABS 20CF is a high modulus carbon fiber-reinforced ABS with excellent conductivity. It is suitable for a wide variety of injection molding applications, including electronic components, shipping trays, storage racks, electronic housings and work surfaces.

Diamond Plastics DiaPow HDPE HX is a polyethylene laser sinter powder black with very high chemical resistance.

Kube PIR 22302 is used for fresnel lenses and windows of PIR motion detectors, thermal imaging cameras and non-contact thermometers.

PROFILAN Kunststoffwerk PROlene 500 EL is similar to PROlen 500 REIN having specific volume resistance upto 10⁴.

Kube PIR 22300 is used for fresnel lenses and windows of PIR motion detectors, thermal imaging cameras and non-contact thermometers.

Kube PIR 40704 is used for fresnel lenses and windows of PIR motion detectors, thermal imaging cameras and non-contact thermometers.

BARLOG plastics GmbH Kebablend® / MW 24.1200 PE is a product based on PE for the production of soft magnetic components. The achievable permeability is <5 (at 1MHz) and the saturation flux density is <300 mT.

Manifattura Cattaneo PE HD material has a high resistance to chemicals, absorbs little water and has good electrical properties. It is normally used with temperatures between –40 ° C and + 80 ° C and is resistant to water, saline solutions, acids, alkalis, alcohol and petrol. Below 60 ° C PE is insoluble in all organic solvents.

Prime Polymers Evolue® SP2030 is a Linear Low Density Polyethylene product. It can be processed by extrusion and is available in Asia Pacific, Europe, or North America.

Prime Polymers HI-ZEX® 5100E is a high Density Polyethylene product. It can be processed by extrusion and is available in Asia Pacific, Europe, or North America. Applications of HI-ZEX® 5100E include coating applications and wire & cable.

HI-ZEX™ 5305E is a High Density Polyethylene product. It can be processed by extrusion and is available in Asia Pacific, Europe, or North America. Typical application: Wire & Cable.Characteristics include: Fast Molding Cycle Good ESCR (Stress Crack Resistant)

Nano4 Bio PE EC MB 12 is an electrically conductive masterbatch based on bio-polyethylene.

Kube PIR 22400a is used for fresnel lenses and windows of PIR motion detectors, thermal imaging cameras and non-contact thermometers.

PROlen 6000 EL antistatically equipped, especially for high-speed production lines, but also suitable for contact with food.

OKULEN® 500 AST black FN9200 is a permanent conductive modified HMW-PE polymer. This material is used for applications in which it is not allowed to build up static properties. The used additives, type and quantity, meets the cleanliness class FDA §178.3297 (USA) the EU-regulations 1935/2004/EC and 10/2011/EC for “Food contact applications”. The product fullfills the requirements of the ATEX - Directive for values of resistivity. It was tested on representative samples by the TÜV-Nord (Germany).

Dissipative product based on High density polyethylene (HD-PE). Unfilled.

Prime Polymers HI-ZEX® 6300M is a high Density Polyethylene product. It can be processed by extrusion and is available in Asia Pacific, Europe, or North America. Applications of HI-ZEX® 6300M include electrical/electronic applications and plumbing/piping/potable water.

KEBABLEND / H 24.1200 PE is a functional compound based on PE with high density.

FibraQ® is a surface-treated wood fiber for plastic injection molding. With our patented technology our product can help companies to reach their climate goals by replacing more than half of the plastic with natural material in products ranging from car interiors, electronics, furniture, toys, lifestyle products, etc.

Forlene® HDPE is a special compound, recycled and recyclable, based on high density polyethylene (HDPE), produced and marketed by Forever Plast S.p.A., in national and international market and intended to create plastic products of different kinds of application.

TKC Kunststoffe E.K. Scona Tspe 2102 GAHD is a coupler for polyethylene fiber compounds and compatibilizer for PA / PE blends.

Forlene® HDPE is a special compound, recycled and recyclable, based on high density polyethylene (HDPE), produced and marketed by Forever Plast S.p.A., in national and international market and intended to create plastic products of different kinds of application.

Kube PIR 40703 is low density black/smoky used for fresnel lenses and windows of PIR motion detectors, thermal imaging cameras and non-contact thermometers.