Products in Other Devices & Assemblies: Polyurethanes (PU)

BARLOG plastics GmbH Kebaflex® / U FE 181105/2 Natural is a TPU with a Shore hardness of A 70. It is characterized by high flexibility, very good wear and abrasion resistance as well as good damping and resilience behavior.

MU-642B is a non-yellowish, highly transparent material.

BARLOG plastics GmbH Kebaflex® / U A85 ST C01 is a TPU with a Shore hardness of A 85. It is characterized by its excellent flowability and is also suitable for thin-walled components. Kebaflex® / U A85 ST C01 is very resistant to hydrolysis, flexible at low temperatures and resistant to microorganisms,.

Henan Anglxxon Chemical Thermoplastic polyurethane resin ALX-A is used in adhesive is a solvent-soluble thermoplastic elastomer, in esters, ketones, DMF, dichloromethane and other solvents have good solubility.

Smooth-Cast™ ONYX™ SLOW is a mercury-free urethane resin that cures at room temperature to a deep black, solid plastic. ONYX™ resins offer the convenience of a 1A:1B by volume mix ratio and have very low viscosities, so they are easy to mix and pour. ONYX™ resins have an ultimate Shore hardness of 80D and offer higher physical properties and higher heat resistance vs. other general purpose resins. ONYX™ resins are available in 2 speeds. ONYX™ FAST resin has a pot life of 2.5 minutes and a cure time of 10-15 minutes, while ONYX™ SLOW has a pot life of 5 minutes and a cure time of 90 minutes.

BC8160 is a low viscosity two-component urethane casting compound that is specifically formulated for its flexural and impact strength. It is recommended for use for the production casting of highly wear-resistant parts and prototypes. BC8160 can be used to develop thermoplastics type prototypes. This product is a safe, easy-to-handle, room temperature mixing and curing system that does not contain TDI, MDI, or MOCA. BC8160 is relatively insensitive to typical environmental moisture and will make good void-free parts without the problems that some conventional urethane systems exhibit.

Polyurethane (PUR) based compound. Glass fibres. Very good noise reduction. Good impact resistance even at low temperature.

BC 8782 produces a high impact rigid 82 Shore D material that is commonly used to make clear or tinted castings of all kinds. When used at room temperature castings 1/8 " thick or larger can readily be cast. Castings that are less than 1/8 " thick generally require a mild post-cure.

GS Polymers GSP 1603-6DS is a version of GSP 1603-5 that has been modified to allow packaging in a side-by-side (sbs) cartridge.

OpteSTAT™ master batches are Ovation Polymers' line of nano-compounds based on carbon nanotubes. Our proprietary dispersion technology debundles and disentangles carbon nanotubes without compromising their integrity. OpteSTATTM compounds exhibit good conductivity at minimal nanotube loadings, achieving exceptional cleanliness and physical property retention.OpteSTAT™ NC TPU 9020 is a Thermoplastic Polyurethane-based carbon nanotube compound. The material resistivity can be tailored to the application, while retaining the physical and thermal properties of the base polymer.Target applications include components of disk drives, business machines or other electronic assemblies where ESD control is required while retaining exceptional cleanliness, dimensional control and physical properties.

MU-209B Its functions are flexible, low stress, stress release, and shock absorption.

FINIGARD 301 is a water based, PUD Sealer for Chrome (III) passivated, Zinc- and Zinc-alloy electroplated surfaces. It was developed to meet the demands of the automotive, window fitting and construction industry. It provides increased corrosion protection and improved optical appearance. The iridescence of passivated surfaces can be effectively reduced, leading to a homogeneous color tone and appearance.

The MU-120B performs the following functions: flexibility, low stress, heat resistance, stress release, and shock absorption.

BARLOG plastics GmbH Kebaflex® / U A90 ST B01 is a TPU with a Shore hardness of A 90. It is characterized by high flexibility and very good wear and abrasion resistance.

GS Polymers GSP 1573-1 is a two-part, general purpose polyurethane potting system. The low viscosity A and B components readily mix into an easily pourable potting resin.

It performs L-TYPE functions as MU-201A. Flexible, low-stress, heat-resistant, stress-relieving, shock-absorbing

The MU-120A performs the following functions: flexibility, low stress, heat resistance, stress release, and shock absorption.

MU-107A It has the following properties: flexibility, low stress, moisture resistance, stress release, and shock absorption.

GS Polymers GSP 1552-2 is an optically-clear, two-part polyurethane system that cures at room temperature. With a convenient mix ratio (1 to 1 by both weight and volume),.

BARLOG plastics GmbH Kebaflex® / U D72 ST B.01 is a TPU with a Shore hardness of 72D. It is characterized by flexibility and good wear and abrasion resistance.

MU-107B It has the following properties: flexibility, low stress, moisture resistance, stress release, and shock absorption.

GS Polymers GSP 1603-3 is a two-part polyurethane compound used for electrical potting encapsulation. This system offers one to two hours of working time and is ideal for hand mixed applications.

GS Polymers GSP 1555 is an optically-clear, two-part polyurethane system that cures at room temperature. Its low-viscosity A and B components are easily mixed into a readily pourable material.

The function of MU-636B LV is weatherability and non-yellowing.

MU-209A Its functions are flexible, low stress, stress release, and shock absorption.

Ultimaker TPU 95A is highly versatile for industrial applications, TPU 95A filament is thego-to choice for a wide array of manufacturing projects that demand thequalities of both rubber and plastic. Designed for 3D printing consistency,TPU 95A is a semi-flexible and chemical resistant filament with stronglayer bonding. In addition, it is easier and faster to print than otherTPU filaments.

MU-642A is a non-yellowish, highly transparent material.

GS Polymers GSP 1603-5 is a two-part polyurethane compound used for electrical potting encapsulation.

The function of MU-636A is weatherability and non-yellowing.

GS Polymers GSP 1502T-2 is a flame-retardant, thermally-conductive, flexible polyurethane potting system. The Part A and Part B components have a low mixed-viscosity that allows for good flow and substrate wetting during application.

Polyurethane (PUR). Unfilled. Very good noise reduction. Good impact resistance even at low temperature.

BARLOG plastics GmbH Kebaflex® / U D63 ST B.01 is a TPU with a Shore hardness of 63D. It is characterized by flexibility and good wear and abrasion resistance.

The MU-115B will perform flexible and heat cycle resistant functions.

MU-201B its Functions Flexible, Low Stress, Heat Resistant, Stress Release, Shock Absorption.

The MU-115A will perform flexible and heat cycle resistant functions.

Smooth-Cast™ ONYX™ FAST is a mercury-free urethane resin that cures at room temperature to a deep black, solid plastic. ONYX™ resins offer the convenience of a 1A:1B by volume mix ratio and have very low viscosities, so they are easy to mix and pour. ONYX™ resins have an ultimate Shore hardness of 80D and offer higher physical properties and higher heat resistance vs. other general purpose resins. ONYX™ resins are available in 2 speeds. ONYX™ FAST resin has a pot life of 2.5 minutes and a cure time of 10-15 minutes, while ONYX™ SLOW has a pot life of 5 minutes and a cure time of 90 minutes.