Products in Other Devices & Assemblies: Silicones

SC-454M-6 is a thermally conductive, low viscosity, condensation cure, RTV silicone potting or encapsulating compound. It is readily pourable and can cure at room temperature. The cured resin has a very good flexibility with excellent electrical properties and high temperature resistance.

SC-550-LV-TC-1 is a 100% silicone solid elastomer designed for electronic potting applications. This two-component system offers a hard, self-bonding, thermally conductive, low modulus material that is readily repairable. SC-550LV-TC-1 is highly filled and offers excellent thermal conductivity. It is also offers a convenient mix ratio of 1:1 by weight and volume.

SC-550-LV-RT is a 100% silicone solid elastomer designed for electronic potting applications. This two-component, room temperature curing system offers a hard, self-bonding, thermally conductive, low modulus material that is readily re-workable.

SC-417 is a two-part, low viscosity, clear silicone which will cure at room temperature or at elevated temperatures. The cured elastomer is suited for electrical/electronic potting and encapsulating applications and provides environmental protection. It is readily pourable and can cure from room temperature to 200°C. The cured resin has a very good flexibility with excellent electrical properties and high temperature resistance.

Cuyahoga Plastics S-4021 is a glass, mineral & graphite filled Silicone Thermoset molding compound specifically designed for contact components in the hot glass handling industry.

Cuyahoga Plastics S-4900 is a glass & mineral-filled Silicone Thermoset molding compound designed for components requiring extreme high temperature performance.

Shinepoly® LP2082 modifier has crosslinked silicone and butyl-acylate copolymer core with grafted poly-methyl methacrylate shell. It provides superior low temperature impact performance and weatherability with minimum affect on flame retardant performance of PC.

MAST Technologies MR21-0012-20 is a thin magnetically loaded sheet stock with loss at microwave frequencies while retaining the desirable properties of elastomeric binders. Cavity Resonance Absorbers are designed to have a high loss and are intended to be applied to metal surfaces inside microwave cavities to reduce the cavity's Q. Cavity Resonance Absorbers attenuate energy at normal and high angles of incidence at frequencies ranging from 1 GHz to 20 GHz. The most common elastomer is silicone, but other elastomer formulations are available.

MAST Technologies MR21-0002-01 is used for Resonant Cavity Attenuation, EMI Reduction, Rx/Tx Antenna Isolation, System Isolation, High Frequency Interference, Inside a Shielding Can, and Specular Return (RCS).

Flame-retardant V-0, UL746C: f1

Tarflon® RC2041 by Idemitsu Chemicals is comprised of Polycarbonate and Siloxane polymer. It is commonly used for a variety of applications. .

P & P Technology Silver Copper Loaded Silicone EC-H is a silicone elastomer with Silver conductivefiller. It is tan in color.

MAST Technologies MR21-0001-01 has the characteristics of The tough material can withstand outdoor exposure. Extremely thin for tight quarters. A flexible elastomeric material will not crack. Support a wide frequency range RoHS/REACH Compliant, Halogen-Free.

MAST Technologies MR21-0012-00 is a thin magnetically loaded sheet stock with loss at microwave frequencies while retaining the desirable properties of elastomeric binders. Cavity Resonance Absorbers are designed to have a high loss and are intended to be applied to metal surfaces inside microwave cavities to reduce the cavity's Q. Cavity Resonance Absorbers attenuate energy at normal and high angles of incidence at frequencies ranging from 1 GHz to 20 GHz. The most common elastomer is silicone, but other elastomer formulations are available.

Robbins Rubber Silicone Rubber Sheets have been popularly used in automotive, food handling, electronic, medical, and construction applications, among others. This is primarily because silicone rubber has a broad working temperature range that allows it to handle both high and low extreme temperatures. It is a talc-free powder.

Robbins Rubber Silicone Rubber Strips are popular use in automotive, food handling, electronic, medical, and construction applications, among others. This is primarily because silicone rubber has a broad working temperature range that allows it to handle both high and low extreme temperatures.

NuSil™ CF2-3521 is a fluorosilicone elastomer.

Shinepoly® LP2083 modifier is a core-shell impact modifier with Silicon rubber content that provides excellent colorability, chemical resistance and superior low temperature impact performance.

P & P Technology ECF-Q are constructed from silicone containing metal powder fillers which combine to produce high levels of attenuation with excellent environmental shielding and a high level of conductivity. Many types of filler, from nickel graphite to pure silver, are available to suit a wide range of applications. There are also Fluorosilicone variants for use in the presence of hydrocarbon contamination. The Conductive Silicone Range was originally developed for high performance shielding mainly for military applications. However, the introduction of lower cost llers has now made them accessible to the commercial sector. They are used where environmental and EMI screening is required but space constraints or stringent environmental protection necessitates a small cross section prole, often tted into a groove or channel.

Silopren™ LSR 2670 FC by Momentive Performance Materials is comprised of Silicone Elastomer. It is commonly used as Molding Resin for a variety of applications in Aerospace, Automotive and Aviation. It is available in Liquid form.

MAST Technologies MR21-0002-00 is used for Resonant Cavity Attenuation, EMI Reduction, Rx/Tx Antenna Isolation, System Isolation, High Frequency Interference, Inside a Shielding Can, and Specular Return (RCS).

P & P Technology Carbon Loaded Silicone EC-C which when properly catalyzed can be considered for applications requiring conductivity such as EMI gaskets, conductive sheaths for ignition cable core, electronic keyboard contacts, etc.

Silopren™ LSR 2665 by Momentive Performance Materials is comprised of Silicone Elastomer. It is commonly used as Molding Resin for a variety of applications in Aerospace, Automotive and Aviation. It is available in Liquid form.

P & P Technology Nickel Loaded Silicone EC-N is available as sheeting, profileextrusions,jointed rings, self-adhesive backed, strip and die-cut. They are particularly suited to use inhigh temperature seals and gaskets, where a soft easily deformable rubber is required and where public safety is critical.

Tarflon® AG2030 by Idemitsu Chemicals is comprised of Polycarbonate and Siloxane polymer. It is commonly used for a variety of applications. .

BC 9060 is a blue colored, two-component, flowable compound that, regardless of thickness or confinement, cures at room temperature or by application heat. The cured rubber is high strength and high tear with good elongation. BC9060 is a mold-making material recommended for repetitive production of intricate shapes cast in epoxy or urethane resins. It is also used in potting of electronic components and in protecting sensitive assemblies against thermal shock and vibration.

NuSil™ CV10-2568 is controlled volatility RTV ablative silicone. For applications requiring low outgassing and minimal volatile condensables under extreme operating conditions to avoid condensation in sensitive devices.

P & P Technology SE510FR UL94V0 is available as sheeting, profileextrusions,jointed rings, self-adhesive backed, strip and die-cut. They are particularly suited to use inhigh temperature seals and gaskets, where a soft easily deformable rubber is required and where public safety is critical.

P & P Technology Black Nickel Graphite Silicone ECB-Q is a black silicone elastomer with a nickel / graphite conductive filler.

Shinepoly® LP2088 modifier has crosslinked silicone and butyl-acylate copolymer core with grafted poly-methyl methacrylate shell. It provides superior low temperature impact performance, thermal stability and hydrolytic resistance with minimum affect on flame retardant performance of PC.

Tarflon® RC2031 by Idemitsu Chemicals is comprised of Polycarbonate and Siloxane polymer. It is commonly used for a variety of applications. .

MAST Technologies MR21-0001-20 has the characteristics of The tough material can withstand outdoor exposure. Extremely thin for tight quarters. A flexible elastomeric material will not crack. Support a wide frequency range RoHS/REACH Compliant, Halogen-Free.

P & P Technology Nickel Loaded Fluoro Silicone ECF-N are constructed from silicone containing metal powder fillers which combine to produce high levels of attenuation with excellent environmental shielding and a high level of conductivity. Many types of filler, from nickel graphite to pure silver, are available to suit a wide range of applications. There are also Fluorosilicone variants for use in the presence of hydrocarbon contamination. The Conductive Silicone Range was originally developed for high performance shielding mainly for military applications. However, the introduction of lower cost llers has now made them accessible to the commercial sector. They are used where environmental and EMI screening is required but space constraints or stringent environmental protection necessitates a small cross section prole, often tted into a groove or channel.

NuSil™ CV10-2500 is a controlled volatility silicone. For applications requiring low outgassing and minimal volatile condensable under extreme operating conditions.

P & P Technology Fire Retardant Nickel Graphite ES-Q-FR is a conductive silicone.

NuSil™ CF1-3510 is a engineering flourosilicone elastomer. Designed for protection of electrical components and assemblies against shock, vibration, moisture, dust, chEMIcals, and other environmental hazards.