Products in Other Devices & Assemblies: Automotive Applications

Aegis® H8202NL resin is a 2.6 RV, unfilled, low/medium viscosity, non-lubricated, nylon 6 homopolymer. It combines good strength, stiffness and toughness with excellent heat, chemical and abrasion resistance.

Aegis® H8202NLB is an unfilled, low/medium viscosity, non-lubricated nylon 6 injection molding homopolymer exhibiting excellent melt fluidity for filling thin sections. It exhibits good strength, stiffness and toughness as well as excellent heat, chemical and abrasion resistance.

Aegis® PIR-H8202NLB resin from AdvanSix contains 100% post-industrial recycled (PIR) raw materials while providing the same top performance and processability as Aegis® H8202NLB, its standard, non-recycled counterpart.Aegis® PIR-H8202NLB resin is an unfilled, low/medium viscosity, non-lubricated, nylon 6 homopolymer. It exhibits good strength, stiffness, and toughness as well as excellent heat, chemical and abrasion resistance.

Aegis® PIR-H35ZI resin from AdvanSix contains 100% post-industrial recycled (PIR) raw materials while providing the same top performance and processability as Aegis® H35ZI, its standard, non-recycled counterpart.Aegis® PIR-H35ZI resin is an unfilled, low viscosity, non-lubricated nylon 6 injection molding homopolymer exhibiting excellent melt flow properties for filling thin sections and reduced cycle times. Aegis® PIR-H35ZI homopolymer exhibits good strength, stiffness and toughness as well as excellent heat, chemical and abrasion resistance.

Aegis® H35ZI is an unfilled, low viscosity, non-lubricated nylon 6 injection molding homopolymer exhibiting excellent melt flow properties for filling thin sections and reduced cycle times. It exhibits good strength, stiffness and toughness as well as excellent heat, chemical and abrasion resistance.

High heat resistance ABS plating grade. Benefits: Enhanced heat resistance; Better dimensional under heat; Excellent balance of heat resistance, impact strength and flowability. Typical Applications: Decorative interior parts, Profiles, Radiator grille, Tailgate handles. Chemical Composition: Acrylonitrile-butadiene-styrene (ABS) copolymer modified with poly(styrene-co-maleimide) (SMI).

High heat resistance ABS. Benefits: Increased flow; Good process ability behavior; Super low emission grade; Lower mold deposits in injection molding processing applications; Better dimensional under heat. Chemical Composition: Acrylonitrile-butadiene-styrene (ABS) copolymer modified with poly(styrene-co-maleimide) (SMI).

High heat resistance ABS. ISO shortname: ISO 2580-1 ABS 1-M, MG, 105-15-16-20. Benefits: Excellent balance of impact strength and flowability; Super low emission grade; Lower mold deposits in injection molding processing applications; Better dimensional under heat. Chemical Composition: Acrylonitrile-butadiene-styrene (ABS) copolymer modified with poly(styrene-co-maleimide) (SMI)

Very high heat resistance ABS. ISO shortname: ISO 2580-1 ABS 2-M, MG, 115-08-09-20. Benefits: Increased flow; Super low emission grade; Very high vicat softening point ABS grade suitable for interior and exterior applications; Lower mold deposits in injection molding processing applications; Better dimensional under heat. Chemical Composition: Acrylonitrile-butadiene-styrene (ABS) copolymer modified with poly(styrene-co-maleimide) (SMI).

Improved heat resistance, low emissions, easy-flowing. Major Benefits: Low emission; Medium heat resistance; High flowability. Typical Applications: Radiator grille, Door components, Enclosures for electric devices.

PC/ABS blend, injection molding grade with excellent mechanical properties balance up to -40ºC. Vicat B120 = 120ºC. Major Benefits: High flow; Very high impact up to -40ºC; Low emission grade; UV stabilized grade; Good stability even with high humidity conditions; Low shrinkage; Good paintability; Thin-walled parts. Typical Applications: Radiator grille, Pillars, Instrument panel parts, Seating parts, Center console trim, Door components, Small household, Electrical switches, distribution boards, power sets. Chemical composition: Thermoplastic polymer blend based on polycarbonate (PC) and acrylonitrile-butadienestyrene (ABS).

Electroplating grade. Benefits: High Galvano quality for class A surfaces; High flowability. Applications: Shower heads and other sanitary chromed parts, Cosmetic packaging, chromed kitchen products.

Elix™ ABS DP M116GF is High flow GF reinforced ABS (16%). Major Benefits: Excellent balance of impact strength, rigidity and flowability; Good dimensional stability; High rigidity. Typical Applications: Semi-structural Automotive interior parts, Exterior Automotive pillars, Air conditioner fan. Chemical composition: Acrylonitrile-Butadiene-Styrene Copolymer with Glass Filler.

PC/ABS blend, injection molding grade that poses a good combination of impact, stiffness and toughness. Vicat B120 = 130ºC. Major Benefits: Low emission, Extreme heat resistance, Very high impact, High flowability. Typical Applications: Rear light housing, Pillars, Instrument panel parts, Coffee machine, Electrical switches, distribution boards, power sets. Chemical composition: Thermoplastic polymer blend based on polycarbonate (PC) and acrylonitrile-butadienestyrene (ABS).

PA 6 reinforced with glass fiber, flame retarded

TRIREX® Compound 3025G20 is a Polycarbonate (PC) product. It is available in Asia Pacific, Europe, or North America. Primary characteristic: flame rated.

PBT-GF30, PBT, 30% glass fiber reinforced, approved for use in food contact

Tarnamid® T- 30 MHLS is a polyamide 6 UV stabilized to improve resistance against weathering influence.

Sylvin™ 9080-75 Black is a vinyl compound formulated for molded automotive window encapsulation applications.

PP Copolymer Industrial Black 20% Talc filled

CP-Polymer Technik Wellamid® 6600-PA66-GV 20 HWV0CP is a Polyamide 66 (PA 66) polymer. It can be processed using injection molding. Suitable for E&E (Electrical & Electronics) and automotive industry.

Pentamid A GV30 H1 black is a normal viscosity, heat and high oil stabilized polyamide 66, 30% glass fiber reinforced.

Polycarbonate/Acrylonitrile Butadiene Styrene, thermally and electrically conducting grade.

Pentamid B GV15 GK15 H natural is a normal viscosity, heat stabilized polyamide 6, 15% glass fiber and 15% glass bead reinforced.

POM copolymer unreinforced, low viscosity, laser-inscribable

Haiplen™ H10 T8 HT by Taro Plast is comprised of Polypropylene (unspecified). It is commonly used Haiplen™ H10 T8 HT is certified as UL Flame Rated. It is available in Pellets form.

Paracril 2840 is a copolymer of butadiene and acrylonitrile, cold polymerized with a non-staining stabilizer.

TRIREX is the registered trademark of polycarbonate resin manufactured by Samyang Corporation. TRIREX polycarbonate resins offer superior mechanical properties, good dimensional stability and high electrical performance, which allows it to be widely used for electrical, electronic, appliance, automotive and optical industries. TRIREX 3022IR(01) is a polycarbonate resin grade which has high low temperature impact strength in combination with superior mechanical and physical property. CHARACTERISTICS Superior low temperature impact resistance Good flow-ability Workable under a wide range of temperatures (-100°C ~ 135°C) High electrical performance Good dimensional stability Low moisture absorbency Good weather resistance APPLICATIONS TRIREX 3022IR(01) resin grade is used for electric and electronic applications, food contact materials and etc. Medium viscosity. Transparent colors only.

KEBABLEND / H 21.1200 PP is a functional compound based on PP with high density.

PP Copolymer Natural 30% Mineral filled

PBT-GF15 FR, PBT, 15% glass fiber reinforced, flame retardant

Toray Toyolac® TP10-GP1 is an Acrylonitrile Butadiene Styrene (ABS) product. It is available in Asia Pacific, Europe, or North America. Characteristics includess flame rated, antistatic, wear resistant.

Loyblend TA-1000 is a general purpose PCIABS polymer alloy. This grade offers high impact resistance, high rigidity and high heat resistance.