Products in Other Devices & Assemblies: Automotive Interior Parts

High heat resistance ABS plating grade. Benefits: Enhanced heat resistance; Better dimensional under heat; Excellent balance of heat resistance, impact strength and flowability. Typical Applications: Decorative interior parts, Profiles, Radiator grille, Tailgate handles. Chemical Composition: Acrylonitrile-butadiene-styrene (ABS) copolymer modified with poly(styrene-co-maleimide) (SMI).

Very high heat resistance ABS. ISO shortname: ISO 2580-1 ABS 2-M, MG, 115-08-09-20. Benefits: Increased flow; Super low emission grade; Very high vicat softening point ABS grade suitable for interior and exterior applications; Lower mold deposits in injection molding processing applications; Better dimensional under heat. Chemical Composition: Acrylonitrile-butadiene-styrene (ABS) copolymer modified with poly(styrene-co-maleimide) (SMI).

PC/ABS blend, injection molding grade with excellent mechanical properties balance up to -40ºC. Vicat B120 = 120ºC. Major Benefits: High flow; Very high impact up to -40ºC; Low emission grade; UV stabilized grade; Good stability even with high humidity conditions; Low shrinkage; Good paintability; Thin-walled parts. Typical Applications: Radiator grille, Pillars, Instrument panel parts, Seating parts, Center console trim, Door components, Small household, Electrical switches, distribution boards, power sets. Chemical composition: Thermoplastic polymer blend based on polycarbonate (PC) and acrylonitrile-butadienestyrene (ABS).

Elix™ ABS DP M116GF is High flow GF reinforced ABS (16%). Major Benefits: Excellent balance of impact strength, rigidity and flowability; Good dimensional stability; High rigidity. Typical Applications: Semi-structural Automotive interior parts, Exterior Automotive pillars, Air conditioner fan. Chemical composition: Acrylonitrile-Butadiene-Styrene Copolymer with Glass Filler.

PA 6 reinforced with glass fiber, flame retarded

Armamid™ PA6-4T by Polyplastics Group is comprised of Polyamide 6. It is commonly used It is available in BMC - Bulk Molding Compound form.

ECO MEPLAC IS 110 BK is a ABS injection molding grade. It is suitable for general purpose.

70 Shore A TPENoble Polymers Flextuff series of Thermoplastic Elastomer Compounds (TPE) offer rubber-like feel with the ease of processing and recyclability of a thermoplastic. This unique family of products are developed using the highest quality raw materials and additives to create soft feel materials in a wide range of hardness levels for both injection molding as well as extrusion processing methods.Flextuff TPE compounds are used in applications such as grips, seals, over-molded handles and many other applications in the commercial, automotive, sports and leisure and building and construction industries.Features Include:Durometer (hardness) range from 25 - 90 Shore AAvailable in natural, black or custom colorsAdditive packages include: UV stabilization, scratch and mar resistanceFormulations for injection molding as well as profile extrusionCustomized formulations available to meet your specific needAll Flextuff products are 100% recyclable

PA 6 reinforced with glass fiber

Glass Sphere Reinforced Nylon Resin (PA66)

POLYKING® polypropylene material, has excellent comprehensive properties, chemical stability, easily molding and very high cost-effective. It is widely used in electronic/electrical appliance, automotive, home appliance, sport/ leisure equipment, industry/ mechanical, furniture etc. fields.

BDT H3651 has an excellent mold flow, mold release, good resistance to the fuel containing alcohols.

d2p® Flame Retardant decrease the ignitability of materials and inhibit the combustion process, limiting the amount of heat released.

Seculene® PPR 1240 TV30 S0 can be specifically tailored to the unique needs of our customers. Seculene® PP is used in a wide variety of sectors with extensive polymer requirements, such as the automotive segment. ECOBAT works with a wide range of industry brands from planning and development through to unit production.

Idemitsu Chemicals Xarec® N WA 7020 is a Syndiotactic Polystyrene + PA (SPS+Nylon) product filled with 20% glass fiber. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Primary characteristic: flame rated.

Glass Sphere Reinforced Nylon Resin (PA66)

LONGHUA PC813F having a fine matte Polished Film texture is a like PC 813, but extra fine matte texture

Elastoflo 90A-300 (SEBS Based Thermoplastic Elastomers) are a family of soft and rubbery products designed for applications requiring soft touch feel, high abrasion and slip resistance. These products have outstanding tear and tensile properties compared to thermoset EPDM.

LONGHUA PC 836 having velvet – fine matte Film texture is a textured film, translucent, very matt appearance on suede film side

Neoplast™ 180 C are strong, flexible materials providing excellent sealing, esthetics, long term performance compared to thermoset rubbers and PVCs.

RIALENE P 101 SGF10plus ST natur is in Granules, Natural Color. RIABLEND ® product line includes all plastic compounds that consist of at least two polymers. On the one hand, we combine polymers that can be easily combined with one another due to their chemical structure. On the other hand, our blends are also polymers that would not necessarily go together straight away, which we combine using a compatibilizer. With our egg-laying wool milk sow, you have a multitude of possible combinations - and thus also various properties of the plastics - at your disposal.

POLYKING® Polyamide engineer plastic is not only super high strength and high rigidity, but also has very excellent heat stability and chemical resistance. It shows very excellent stability on different kinds of oil compounds and has excellent electrical property. It is widely used in electrical and electronic, automotive, communication, mechanical engineer, sport apparatus etc..

Neoplast™ 180 HOFR are strong, flexible materials providing excellent sealing, esthetics, long term performance compared to thermoset rubbers and PVCs.

LONGHUA PC 835 having matte - velvet Film texture is a textured film, translucent, special texture help to conceal scratches

Polyarn bv PES - PolyEtherSulphone is known for its toughness and stability at high temperatures. Due to the high cost of raw materials and processing, polysulfones are used in specialty applications and often are a superior replacement for polycarbonates. Three polysulfones are used industrially: polysulfone (PSU), polyethersulfone (PES) and polyphenylene sulfone (PPSU). They can be used in the temperature range from -100 to +200°C and are used for electrical equipment, in vehicle construction and medical technology. Polysulfones have outstanding resistance to heat and oxidation, they are hydrolysis resistant and have good electrical properties.

Envir® PA6G3OHL-BK0701 is a 30% glass fiber reinforced nylon 6 molding resin, it is heat stabilized and hydrolysis resistant. 6G30HL is optimized for properties and processability. It is provided black in color.

Armamid™ PA GF 40-1 by Polyplastics Group is comprised of Polyamide (unspecified). It is commonly used It is available in BMC - Bulk Molding Compound form.

Shenzhen Xinghua Pigment Masterbatch Solvent Blue 35 is blue colored anthraquinone dye by Shenzhen Xinghua Pigment Masterbatch. It offers very good light fastness, high heat resistance and very good migration fastness. Solvent Blue 35 is designed for use in PS, SAN, hard PVC, AS, ABS, PMMA and PET. It can be used in PBT, PC, PA 6 and PA 66.

POLYKING® polypropylene material, has excellent comprehensive properties, chemical stability, easily molding and very high cost-effective. It is widely used in electronic/electrical appliance, automotive, home appliance, sport/ leisure equipment, industry/ mechanical, furniture etc. fields.

Neoplast™ 163 FT EB are strong, flexible materials providing excellent sealing, esthetics, long term performance compared to thermoset rubbers and PVCs.

CP-Polymer Technik Wellamid® GFT33N051-N2 is a Polyamide 66 (Nylon 66) material filled with 33% glass fiber. It is available in Asia Pacific, Europe, Latin America, or North America.Important attributes of Wellamid® GFT33N051-N2 are: Heat Stabilizer Impact Modified

Polyoximethylene (POM) based compound. Glass beads. Medium viscosity. High dimensional stability.

Shenzhen Xinghua Pigment Masterbatch Solvent Blue 78 is blue colored anthraquinone dye by Shenzhen Xinghua Pigment Masterbatch. It provides excellent light fastness, high heat resistance and very good migration fastness. This grade is recommended for use in PS, SAN, hard PVC, AS, ABS, PMMA, PET, PBT, PC and PA 6. Solvent Blue 78 can be used in PA 66.

TPE Solutions TPV 145A-400 is engineered polyolefin with elastomeric behavior designed for injection molding, extrusion, and blow molding applications where soft touch and flexibility are needed. These materials are colorable, weatherable, and may be recycled with other polyolefins.

Nylon 6 A1030FR is a High cycle grade with medium to high viscosity. It is used for injection molding applications.