Products in Other Devices & Assemblies: Consumer Applications

Increased chemical resistance compared to P2H-AT, contains antistatic additive. Major Benefits: Chemical resistance; High gloss; Medium impact. Typical Applications: Telephones, Electronic boards, housings, Refrigerator door handles.

Standard impact strength, easy flowing, high gloss, contains antistatic additive. Benefits: High flow; Gloss with antistatic additive. Typical Applications: Washing machine panel, Kitchen & Coffee Machines, Electrical switches, Distribution boards, Power sets, Cosmetic Compact.

High flow ABS, with antistatic additive. Product properties: Very high flow ABS material; Excellent balance of impact strength and flowability; High gloss surface finish; Used as base resin for improved flowability; Housing big parts; Thin-walled parts. Chemical composition: Acrylonitrile-Butadiene-Styrene Copolymer.

Electroplating grade. Benefits: High Galvano quality for class A surfaces; High flowability. Applications: Shower heads and other sanitary chromed parts, Cosmetic packaging, chromed kitchen products.

Improved chemical and dynamic resistance, high gloss, contains antistatic additive. Benefits: Chemical resistance; Dynamic loading. Typical Applications: Lawnmowers; Dishwasher panel; Lids for electrical accumulators, power sets.

PC/ABS blend, injection molding grade with excellent mechanical properties balance up to -40ºC. Vicat B120 = 120ºC. Major Benefits: High flow; Very high impact up to -40ºC; Low emission grade; UV stabilized grade; Good stability even with high humidity conditions; Low shrinkage; Good paintability; Thin-walled parts. Typical Applications: Radiator grille, Pillars, Instrument panel parts, Seating parts, Center console trim, Door components, Small household, Electrical switches, distribution boards, power sets. Chemical composition: Thermoplastic polymer blend based on polycarbonate (PC) and acrylonitrile-butadienestyrene (ABS).

PC/ABS blend, injection molding grade that poses a good combination of impact, stiffness and toughness. Vicat B120 = 130ºC. Major Benefits: Low emission, Extreme heat resistance, Very high impact, High flowability. Typical Applications: Rear light housing, Pillars, Instrument panel parts, Coffee machine, Electrical switches, distribution boards, power sets. Chemical composition: Thermoplastic polymer blend based on polycarbonate (PC) and acrylonitrile-butadienestyrene (ABS).

High impact strength, high gloss, contains antistatic additive. Applications: Power tool boxes

MicroMB UVA15B is a UV Stabilizer with PE Resin.

Nylon 66 is 14% Glass Fiber, Impact Modified, Heat Stabilized, Lubricated

Nylon 6 A1030GFL45 is a glass fiber-reinforced grade with medium viscosity. It is used for injection molding applications.

Neviester B1 V30 NATURALE is a natural color. Its used in Electric & Electronic Consumer Goods.

Nilit NILAMID® A2 HH M25 is a low viscosity Polyamide 66 (Nylon 66) compound, 25% mineral filled and high heat stabilized.This compound is intended for injection molding.NILAMID® A2 HH M25 is primarily designed for the Automotive industry. It is also suitable for Electrical and Electronic or Industrial & Consumer applications.

Nilit NILAMID® A3 WR GF30 is a Polyamide 66 (Nylon 66) compound, 30% glass fiber reinforced, peroxides stabilized, UL listed HB.It is WRAS certified.This compound is intended for injection molding.NILAMID® A3 WR GF30 is primarily designed for the Industrial & Consumer industry. It is also suitable for Electrical and Electronic or Automotive applications.

Elastoflo 90A-300 (SEBS Based Thermoplastic Elastomers) are a family of soft and rubbery products designed for applications requiring soft touch feel, high abrasion and slip resistance. These products have outstanding tear and tensile properties compared to thermoset EPDM.

Neviester B B30 NATURALE is a Polybutylene terephthalate reinforced with 30% glass beads. its used in Electric & Electronic Consumer Goods

MR-F 7200 is used in appliances, electrics & electronics ,consumer goods ,packaging.

Blue 1004 is used in appliances, electrics & electronics , consumer goods & packaging.

Volaprint Nylon natur colored molding compound.

Nylon 66 is 25% Glass Fiber and lubricated at .4%

Beige 1227 offers a vast range of color masterbatch for PE, PP & PS.

Nylon 6 A3130HR-25 is a Inorganic-fillered grade with low viscosity. It is used for injection molding applications.

Nilit NILAMID® C3 GF30 is a Polyamide 66/6 (Nylon 66/6) compound, 30% glass fiber reinforced, heat stabilized.This compound is intended for injection molding.NILAMID® C3 GF30 is primarily designed for the Automotive industry. It is also suitable for Electrical and Electronic or Industrial & Consumer applications.

TPE Solutions TPV 170A Precolored Gray is a thermoplastic Elastomer (TPE), that is based on PP/EPDM. It is designed to replace thermoset elastomers, such as EPDM or polychloroprene, and traditional thermoplastic TPVs/TPEs. TPV – 170A Precolored Gray provides the performance of vulcanizated rubber with the advantage of low-cost thermoplastic processing. Excellent oil and chemical resistance with a maximum service temperature of 275°F. It is ozone, UV and water resistant as well. This grade is also considered polyolefin.

Nilit NILAMID® A3 W GF30 is a Polyamide 66 (Nylon 66) compound, 30% glass fiber reinforced, heat stabilized, UL listed HB.This compound is intended for injection molding.NILAMID® A3 W GF30 is primarily designed for the Automotive industry. It is also suitable for Electrical and Electronic or Industrial & Consumer applications.

Nilit Nilamid® A3 H is a nilamid® a3 is an unfilled polyamide 66 (nylon 66) compound heat stabilized.This compound is intended for injection molding.Nilamid® a3 is primarily designed for the automotive industry. It is also suitable for electrical and electronic or industrial & consumer applications.

TPE Solutions TPV 145A-400 is engineered polyolefin with elastomeric behavior designed for injection molding, extrusion, and blow molding applications where soft touch and flexibility are needed. These materials are colorable, weatherable, and may be recycled with other polyolefins.

TPE Solutions TPV 155A is a thermoplastic Elastomer (TPE), that is based on PP/EPDM. It is designed to replace thermoset elastomers, such as EPDM or polychloroprene, and traditional thermoplastic TPVs/TPEs. TPV – 160A provides the performance of vulcanizated rubber with the advantage of low-cost thermoplastic processing. Excellent oil and chemical resistance with a maximum service temperature of 275°F. It is ozone, UV and water resistant as well. This grade is also considered polyolefin.

Nano4 BioPE EC 12 is an electrically conductive thermoplastic compound based on bio-polyethylene.

Nilit NILAMID® A3 GF30 TF20 is a Polyamide 66 (Nylon 66) compound, 30% glass fiber reinforced, low wear and friction with 20% PTFE, UL listed HB.This compound is intended for injection molding.NILAMID® A3 GF30 TF20 is primarily designed for the Industrial and Consumer industry. It is also suitable for Electrical and Electronic or Automotive applications.

AS 10 is an antistatic additive with PE Resin.

MicroMB Gray 1113 is used in appliances, electrics & electronics, consumer goods & packaging.

TPE Solutions TPV 165A thermoplastic vulcanizate is a fully crosslinked, EPDM/PP compound. It is designed to replace thermoset elastomers, such as EPDM or polychloroprene, and traditional thermoplastic TPVs. TPV – 165A provides the performance of vulcanizated rubber with the advantage of low-cost thermoplastic processing. Excellent oil and chemical resistance with a maximum service temperature of 275°F.

Nilit NILAMID® B2 HH GF60 is a Polyamide 6 (Nylon 6) compound, 60% glass fiber reinforced, high heat stabilized.This high stiffness and glossy finish compound is intended for injection molding.NILAMID® B2 HH GF60 is primarily designed for the Automotive industry. It is also suitable for Electrical and Electronic or Industrial & Consumer applications.

Nilit NILAMID® A3 GB30 is a Polyamide 66 (Nylon 66) compound, 30% glass bead reinforced, heat stabilized.This compound is intended for injection molding.NILAMID® A3 GB30 is primarily designed for the Automotive industry. It is also suitable for Electrical and Electronic or Industrial & Consumer applications.

Nylon 6 A1022GFL60(A) is a glass fiber-reinforced grade with low viscosity. It is used for injection molding applications.