Products in Other Devices & Assemblies: Chemical Resistant

jER™ 1750 is a very low viscosity Bisphenol F-type liquid epoxy resin. It can be used in sealants, casting agents and adhesives in electrical and electronic applications and fiber reinforced plastics, and for liquid underfill and adhesives for semiconductor manufacturing.FeaturesChemical, heat and water resistanceElectrical insulation*jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YL980 is is a Bisphenol A-type liquid epoxy resin with very low chlorine content. It can be used for electrical and electronic applications (Sealant, casting agent, adhesives, and so on). Benefits Excellent adhesiveness Maintains high electrical reliability Features Chemical, heat and water resistant Electrical insulating properties Significantly low chlorine content (below 500 ppm) Applications Electrical and electronic applications Potting & encapsulation materials Adhesives *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YL983U is a Bisphenol F-type liquid epoxy resin with very low chlorine content and low viscosity. It is used for electrical and electronic applications (Sealant, casting agent, adhesives, and so on). BenefitsExcellent adhesivenessGood elastic recovery FeaturesChemical, heat and water resistantElectrical insulating propertiesSignificantly low chlorine content (below 500 ppm)Low viscosityApplicationsElectrical and electronic applications Potting & encapsulation materialsAdhesives *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Aegis® H8202NL resin is a 2.6 RV, unfilled, low/medium viscosity, non-lubricated, nylon 6 homopolymer. It combines good strength, stiffness and toughness with excellent heat, chemical and abrasion resistance.

Aegis® H8202NLB is an unfilled, low/medium viscosity, non-lubricated nylon 6 injection molding homopolymer exhibiting excellent melt fluidity for filling thin sections. It exhibits good strength, stiffness and toughness as well as excellent heat, chemical and abrasion resistance.

Aegis® PIR-H8202NLB resin from AdvanSix contains 100% post-industrial recycled (PIR) raw materials while providing the same top performance and processability as Aegis® H8202NLB, its standard, non-recycled counterpart.Aegis® PIR-H8202NLB resin is an unfilled, low/medium viscosity, non-lubricated, nylon 6 homopolymer. It exhibits good strength, stiffness, and toughness as well as excellent heat, chemical and abrasion resistance.

Aegis® PIR-H35ZI resin from AdvanSix contains 100% post-industrial recycled (PIR) raw materials while providing the same top performance and processability as Aegis® H35ZI, its standard, non-recycled counterpart.Aegis® PIR-H35ZI resin is an unfilled, low viscosity, non-lubricated nylon 6 injection molding homopolymer exhibiting excellent melt flow properties for filling thin sections and reduced cycle times. Aegis® PIR-H35ZI homopolymer exhibits good strength, stiffness and toughness as well as excellent heat, chemical and abrasion resistance.

Aegis® H35ZI is an unfilled, low viscosity, non-lubricated nylon 6 injection molding homopolymer exhibiting excellent melt flow properties for filling thin sections and reduced cycle times. It exhibits good strength, stiffness and toughness as well as excellent heat, chemical and abrasion resistance.

Vamp Tech Vampamid™ HT 4026 V0 40% glass fiber reiforced, low water absorption, good mechanicals properties, good electrical features, high chemical resistance and excellent operating temperature, UL 94 V0 at 0.8 mm, GWFI 960/1-2

Vamp Tech Vampamid™ HT3 3028 V0 is 30% glass fiber reinforced, halogen free, low water absorption, good mechanicals properties, good electrical features, high chemical resistance and excellent operating temperature, UL 94 V0 at 0.8 mm, GWFI 960/1-2 GWIT 775/1-2.

Increased chemical resistance compared to P2H-AT, contains antistatic additive. Major Benefits: Chemical resistance; High gloss; Medium impact. Typical Applications: Telephones, Electronic boards, housings, Refrigerator door handles.

Vamp Tech Vampamid™ HT 1526 V0 is 15% glass fiber reiforced, low water absorption, good mechanicals properties, good electrical features, high chemical resistance and excellent operating temperature, UL 94 V0 at 0.8 mm, GWFI 960/1-2

Improved chemical and dynamic resistance, high gloss, contains antistatic additive. Benefits: Chemical resistance; Dynamic loading. Typical Applications: Lawnmowers; Dishwasher panel; Lids for electrical accumulators, power sets.

PA 6 reinforced with glass fiber, flame retarded

PBT-GF30, PBT, 30% glass fiber reinforced, approved for use in food contact

ProPolymers PPS 20GF is a 20 % fiberglass reinforced polyphenylene sulfide compound that offers a superior combination of mechanical, electrical, and thermal properties. PPS is inherently flame resistant with low smoke emission. It provides outstanding processability and chemical resistance.

POM copolymer unreinforced, low viscosity, laser-inscribable

Abdullah Al Barrak Plastic Products Polycarbonate Plain Sheet 2100 x 3000 is basically a formless resin possessing a perfect blend of mechanical, optical, thermal, and electrical properties as compared to other materials like metals, glass and other plastics. Polycarbonate Plain sheets are virtually unbreakable in nature and at the same time reflecting an unmatched combination of visual appeal, durability and excellent light transmission. With its high impact strength, polycarbonate Plain Sheet can stand up to anything and everything from stones to hammers, from rough handling during transportation to deliberate damage, without shattering or breaking. Due to its outstanding impact resistance feature in summers and winters, it has completely replaced to other plastic sheets.

PBT-GF15 FR, PBT, 15% glass fiber reinforced, flame retardant

Toray Toraycon® 1101G30 is a Polybutylene Terephthalate (PBT) product filled with 30% glass fiber. It is available in Asia Pacific, Europe, or North America. Typical application Automotive. Primary characteristic includes flame rated.

ProPolymers PEI 2100 is a 10% glass filled polyetherimide that offers a superior combination of mechanical, electrical, and thermal properties. PEI is inherently flame resistant with low smoke emission. It provides outstanding processability and good chemical resistance.

Armamid™ PA6-4T by Polyplastics Group is comprised of Polyamide 6. It is commonly used It is available in BMC - Bulk Molding Compound form.

BARLOG plastics GmbH Kebablend® / WR 01/2420 is a special compound based on POM, which has very good sliding behavior and high wear resistance. The material has medium strength and a high elongation at break.

LoyblendTY-1000 is a high impact compounded blend of polycarbonate and polybutylene terephathalate. This grade offers good chemical resistance, good dimensional stability and high heat resistance.

Viton® /FKM/FFKM is the most specified fluoroelastomer, wel known for its excellent (400°F/200°C) heat resistance. Viton@ offers excellent resistance to aggressive fuels and chemicals and has worldwide ISO 9000 and ISO/TS 16949 registration. Viton® is a brand of synthetic rubber and fluoropolymer elastomer commonly used in O-rings and other molded components. We mold Viton@ O-rings for a variety of applications in the aerospace and industrial markets. Viton® O-rings are ideal in oil field applications where Viton® can resist aggressive properties of natural gas and oils.

PBT-GF50, PBT, 50% glass fiber reinforced, approved for use in food contact

Sollamid A 2730 is the formula for Heat Protected Polyamide.

Badaprene® TPV 50A 1028 by Bada AG is comprised of Ethylene Propylene Diene Terpolymer and Polypropylene (unspecified). It is commonly used It is available in Granules form.

PA 6 reinforced with glass fiber

BARLOG plastics GmbH Kebaform® / C 25 H is a new type of POM that was developed specially for sliding and wear applications. Compared to a standard POM copolymer, the material is characterized by a higher crystalline structure and thus better wear properties and a higher melting temperature. Kebaform® / C 25 H improves the sliding and wear behavior solely by modifying the polymer chain and there is no reduction in mechanical properties due to the addition of tribologically active additives. Due to its property profile, Kebaform® / C 25 H is particularly well suited for applications that require good sliding and wear behavior, but do not allow compromises in mechanical properties, e.g. For gears, rollers, plain bearings, guide bushes, etc.

EMPILON® HA50 is a blending material based on modified hydrogenated Styrenic block copolymer, with a hardness range from Shore A39 to Shore A85. Its main processing method is double injection or co-extrusion.

POLYKING® polypropylene material, has excellent comprehensive properties, chemical stability, easily molding and very high cost-effective. It is widely used in electronic/electrical appliance, automotive, home appliance, sport/ leisure equipment, industry/ mechanical, furniture etc. fields.

PETG (Polyethylene Terephthalate Glycol Comonomer) 3D Printing Filament. PETG - 1 kg benefits include Great impact resistance, Natural color is very clear, Excellent chemical resistance for a clear plastic, Perfect for applications that require high durability and clarity.

Idemitsu Chemicals Xarec® N WA 7020 is a Syndiotactic Polystyrene + PA (SPS+Nylon) product filled with 20% glass fiber. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Primary characteristic: flame rated.

Abdullah Al Barrak Plastic Products Polycarbonate Diamond Sheet 1220 x 2440 has an attractive diamond embossed pattern. The sheets are stronger and flexible, providing superior spanning and load-bearing capabilities. Polycarbonate Diamond sheets can also withstand extremes of temperature more readily than other material and with Long life UV protection, they are also more resistant to the long-term effects of weathering. Polycarbonate Diamond Sheets has several characters with high impact resistance, lightweight and can be easily cold bend processed and hot molding can be done. Hence, it can be widely used in construction and decorations. We present to our clients superior quality sheets, manufactured by the well qualified and experienced engineers of by using high-grade raw material and components at our manufacturing unit.

POM-I, POM copolymer unreinforced, medium viscosity, impact modified