Products in Other Devices & Assemblies: Dimensional Stability

Akulon® Ultraflow XG-FKGS6 is a high-performance polyamide 6 and polyamide 66 material trusted worldwide for applications in automotive, electronics, electrical, furniture, and packaging. In molded parts, it delivers an impressive blend of design simplicity and processing ease, along with exceptional mechanical properties across a wide temperature range and diverse conditions. For extrusion, it sets industry benchmarks, featuring remarkable strength, resilience, and ease of processing. This product boasts special features including 30% glass reinforcement, flame retardancy (halogen-free), and being best suited for injection molding.

UL 94 V0, 30% mineral filled, good electrical features, very good dimensional stability.

UL 94 V0, 45% mixed mineral filled and glass fiber, PBDE - PBDF free, excellent dimensional stability, excellent electrical properties CTI >

UL 94 V0, 30% mixed glass fiber and mineral filled, excellent dimensional stability, good thermal and electrical features.

TRIREX® Compound 3025G20 is a Polycarbonate (PC) product. It is available in Asia Pacific, Europe, or North America. Primary characteristic: flame rated.

PBT-GF30, PBT, 30% glass fiber reinforced, approved for use in food contact

Badamid® LA70 GF30 by Bada AG is comprised of Polyamide 66. It is commonly used It is available in Granules form.

BARLOG plastics GmbH Kebablend® / RS are special compounds based on different polymers for applications by which radiation is to be shielded. Kebablend® / RS XB 060703/1 PA12 was developed for applications that are intended to shield soft and hard X-rays. Due to their physical properties, the filler systems used are particularly well suited to absorbing or attenuating radiation up to 600 keV. Processing using the injection molding process enables a particular degree of design freedom. Despite the high filler content, Kebablend® / RS XB 060703/1 PA12 has excellent mechanical properties.

POM copolymer unreinforced, low viscosity, laser-inscribable

PLASTICYL™ POM1001 is a conductive masterbatch based on Polyoxymethylene (polyacetals) loaded with 10% of Nanocyl’s MWCNTs (NC7000™). Because of its high flow, PLASTICYL™ POM1001 is ideal for injection molding and extrusion processes.

TRIREX is the registered trademark of polycarbonate resin manufactured by Samyang Corporation. TRIREX polycarbonate resins offer superior mechanical properties, good dimensional stability and high electrical performance, which allows it to be widely used for electrical, electronic, appliance, automotive and optical industries. TRIREX 3022IR(01) is a polycarbonate resin grade which has high low temperature impact strength in combination with superior mechanical and physical property. CHARACTERISTICS Superior low temperature impact resistance Good flow-ability Workable under a wide range of temperatures (-100°C ~ 135°C) High electrical performance Good dimensional stability Low moisture absorbency Good weather resistance APPLICATIONS TRIREX 3022IR(01) resin grade is used for electric and electronic applications, food contact materials and etc. Medium viscosity. Transparent colors only.

KEBABLEND / H 21.1200 PP is a functional compound based on PP with high density.

PBT-GF15 FR, PBT, 15% glass fiber reinforced, flame retardant

Toray Toraycon® 1101G30 is a Polybutylene Terephthalate (PBT) product filled with 30% glass fiber. It is available in Asia Pacific, Europe, or North America. Typical application Automotive. Primary characteristic includes flame rated.

Loyblend TA-1000 is a general purpose PCIABS polymer alloy. This grade offers high impact resistance, high rigidity and high heat resistance.

BARLOG plastics GmbH Kebablend® / WR 01/2420 is a special compound based on POM, which has very good sliding behavior and high wear resistance. The material has medium strength and a high elongation at break.

Badamid® T70 CF30 by Bada AG is comprised of Polyamide 6/6T. It is commonly used It is available in Granules form.

LoyblendTY-1000 is a high impact compounded blend of polycarbonate and polybutylene terephathalate. This grade offers good chemical resistance, good dimensional stability and high heat resistance.

BARLOG plastics GmbH Keballoy® C43 is an unreinforced PC / ABS polymer blend, which has advantages over the Keballoy® EP types in terms of mechanical properties due to the increased PC content. It has a particularly good combination of rigidity and toughness and impresses with its easy processing.

PBT-GF50, PBT, 50% glass fiber reinforced, approved for use in food contact

Ares P308 is extremely flexible resin with low styrene content and low exothermic peak.The cross-linked resin is soft and dry to the touch. It is particularly suitable for the production of abrasive cones suitable for abrading particularly fragile and delicate surfaces.

TRIREX is the registered trademark of polycarbonate resin manufactured by Samyang Corporation. TRIREX polycarbonate resins offer superior mechanical properties, good dimensional stability and high electrical performance, which allows it to be widely used for electrical, electronic, appliance, automotive and optical industries. TRIREX 3017PJ is a polycarbonate resin grade which has high low temperature impact strength in combination with superior mechanical and physical property. CHARACTERISTICS Granule type Superior low temperature impact resistance Good flow-ability Workable under a wide range of temperatures (-100 ? ~ 135 ?) High electrical performance Good dimensional stability Low moisture absorbency Good weather resistance APPLICATIONS TRIREX 3017PJ resin grade is designed for Compounding. Ultra low viscosity. Transparent colors only.

BARLOG plastics GmbH Kebaform® / C 25 H is a new type of POM that was developed specially for sliding and wear applications. Compared to a standard POM copolymer, the material is characterized by a higher crystalline structure and thus better wear properties and a higher melting temperature. Kebaform® / C 25 H improves the sliding and wear behavior solely by modifying the polymer chain and there is no reduction in mechanical properties due to the addition of tribologically active additives. Due to its property profile, Kebaform® / C 25 H is particularly well suited for applications that require good sliding and wear behavior, but do not allow compromises in mechanical properties, e.g. For gears, rollers, plain bearings, guide bushes, etc.

OpteSTAT™ master batches are Ovation Polymers' line of nano-compounds based on carbon nanotubes. Our proprietary dispersion technology debundles and disentangles carbon nanotubes without compromising their integrity. OpteSTATTM compounds exhibit good conductivity at minimal nanotube loadings, achieving exceptional cleanliness and physical property retention.OpteSTAT™ NC TPU 9020 is a Thermoplastic Polyurethane-based carbon nanotube compound. The material resistivity can be tailored to the application, while retaining the physical and thermal properties of the base polymer.Target applications include components of disk drives, business machines or other electronic assemblies where ESD control is required while retaining exceptional cleanliness, dimensional control and physical properties.

POLYKING® polypropylene material, has excellent comprehensive properties, chemical stability, easily molding and very high cost-effective. It is widely used in electronic/electrical appliance, automotive, home appliance, sport/ leisure equipment, industry/ mechanical, furniture etc. fields.

Farsoon Technologies FS 3401GB produce parts with high mechanical properties and good abrasive resistance. Farsoon considers material to part of its core competency. Farsoon’s experienced material department has independently developed a portfolio of polymer materials for additive manufacturing. In addition Farsoon’s fully capable material manufacturing is able to vertically control the production of the material from raw material to finished product, ensuring quality and stability. With excellent color stability, oxidation resistance, Farsoon polymer materials produce high quality parts which provide both detailed surface precision and high mechanical properties. In addition Farsoon partners with many material suppliers to bring new and advanced materials to the users through Farsoon’s open material policy.

Idemitsu Chemicals Xarec® N WA 7020 is a Syndiotactic Polystyrene + PA (SPS+Nylon) product filled with 20% glass fiber. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Primary characteristic: flame rated.

PA66 GF/MF reinforced

BARLOG plastics GmbH Kebablend® / M FE 190401 TPE (black) is a development product based on TPE for the production of injection molded magnets. The material has a Shore A 82 hardness.

POM-I, POM copolymer unreinforced, medium viscosity, impact modified

KEBATRON C 1065X1 is a cross-linked and reinforced design with 65% fiberglass or mineral filler.

TRIREX is the registered trademark of polycarbonate resin manufactured by Samyang Corporation. TRIREX polycarbonate resins offer superior mechanical properties, good dimensional stability and high electrical performance, which allows it to be widely used for electrical, electronic, appliance, automotive and optical industries. TRIREX 3025U(02) is a polycarbonate resin grade which has high low temperature impact strength in combination with superior mechanical and physical property.Characteristics: Superior low temperature impact resistance Good flow-ability Workable under a wide range of temperatures (-100 °C ~ 135 °C) High electrical performance Good dimensional stability Low moisture absorbency Good weather resistance Applications: TRIREX 3025U(02) resin grade is used for Injection molding products. UV stabilized. Medium viscosity. Transparent colors only.

LiNNOTAM with oil finely distributed in the material. LiNNOTAMGLiDE has the added Lubricant self-lubricating properties and has excellent wear resistance low coefficient of friction.

TRIREX is the registered trademark of polycarbonate resin manufactured by Samyang Corporation. TRIREX polycarbonate resins offer superior mechanical properties, good dimensional stability and high electrical performance, which allows it to be widely used for electrical, electronic, appliance, automotive and optical industries. TRIREX 3026B(L) is a polycarbonate resin grade which has high low temperature impact strength in combination with superior mechanical and physical property.Characteristics: Superior low temperature impact resistance Good flow-ability Workable under a wide range of temperatures (-100 °C ~ 135 °C) High electrical performance Good dimensional stability Low moisture absorbency Good weather resistance Applications: TRIREX 3026B(L) resin grade is used for extrusion blow molding components. High viscosity. Transparent colors only.

PBT-GF30 FR, PBT, 30% glass fiber reinforced, flame retardant

Mar-Bal MB2000-5 is an excellent flame and track resistant material possessing outstanding electrical and mechanical properties.