Products in Other Devices & Assemblies: Good Processability

Aegis® H8202NL resin is a 2.6 RV, unfilled, low/medium viscosity, non-lubricated, nylon 6 homopolymer. It combines good strength, stiffness and toughness with excellent heat, chemical and abrasion resistance.

Aegis® H8202NLB is an unfilled, low/medium viscosity, non-lubricated nylon 6 injection molding homopolymer exhibiting excellent melt fluidity for filling thin sections. It exhibits good strength, stiffness and toughness as well as excellent heat, chemical and abrasion resistance.

Aegis® PIR-H35ZI resin from AdvanSix contains 100% post-industrial recycled (PIR) raw materials while providing the same top performance and processability as Aegis® H35ZI, its standard, non-recycled counterpart.Aegis® PIR-H35ZI resin is an unfilled, low viscosity, non-lubricated nylon 6 injection molding homopolymer exhibiting excellent melt flow properties for filling thin sections and reduced cycle times. Aegis® PIR-H35ZI homopolymer exhibits good strength, stiffness and toughness as well as excellent heat, chemical and abrasion resistance.

High heat resistance ABS. Benefits: Increased flow; Good process ability behavior; Super low emission grade; Lower mold deposits in injection molding processing applications; Better dimensional under heat. Chemical Composition: Acrylonitrile-butadiene-styrene (ABS) copolymer modified with poly(styrene-co-maleimide) (SMI).

ProPolymers PPS 20GF is a 20 % fiberglass reinforced polyphenylene sulfide compound that offers a superior combination of mechanical, electrical, and thermal properties. PPS is inherently flame resistant with low smoke emission. It provides outstanding processability and chemical resistance.

Paracril 2840 is a copolymer of butadiene and acrylonitrile, cold polymerized with a non-staining stabilizer.

Loyblend TA-1000 is a general purpose PCIABS polymer alloy. This grade offers high impact resistance, high rigidity and high heat resistance.

ProPolymers PEI 2100 is a 10% glass filled polyetherimide that offers a superior combination of mechanical, electrical, and thermal properties. PEI is inherently flame resistant with low smoke emission. It provides outstanding processability and good chemical resistance.

RIGIDDI-PAK R-4525 SeriesA general purpose series of low viscosity, strong, potting and encapsulating compounds. DI-PAK R-4525 has excellent electrical insulating properties and bonds well to many substrates. By varying the curing agents, the desired cure and working life can be obtained.

Farsoon Technologies FS 3401GB produce parts with high mechanical properties and good abrasive resistance. Farsoon considers material to part of its core competency. Farsoon’s experienced material department has independently developed a portfolio of polymer materials for additive manufacturing. In addition Farsoon’s fully capable material manufacturing is able to vertically control the production of the material from raw material to finished product, ensuring quality and stability. With excellent color stability, oxidation resistance, Farsoon polymer materials produce high quality parts which provide both detailed surface precision and high mechanical properties. In addition Farsoon partners with many material suppliers to bring new and advanced materials to the users through Farsoon’s open material policy.

Idemitsu Chemicals Xarec® N WA 7020 is a Syndiotactic Polystyrene + PA (SPS+Nylon) product filled with 20% glass fiber. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Primary characteristic: flame rated.

GRODNAMID PA6-H-GF15P is glass filled polymer composite material.

Yparex® 0F0025 is a family of maleic-anhydride-(MAH)-functionalised polyolefins. For each of its many application areas Yparex® has suitable grades. The grades are characterized by density and melt flow index, melting temperature and the level of functional groups. Functionality for the varying application range is also obtained by using a large array of different base polymers and production technologies. The materials are produced under the highest quality standards allowing no residual unbonded maleic anhydride in the final product.

Paracril 3350 is a copolymer of butadiene and acrylonitrile, cold polymerized with a non-staining stabilizer.

Neoplast™ 180 C are strong, flexible materials providing excellent sealing, esthetics, long term performance compared to thermoset rubbers and PVCs.

Neoplast™ 180 HOFR are strong, flexible materials providing excellent sealing, esthetics, long term performance compared to thermoset rubbers and PVCs.

Idemitsu Chemicals Xarec® S131 is a Syndiotactic Polystyrene (SPS) product filled with 30% glass fiber. It can be processed by injection molding and is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Primary characteristic: flame rated.

5502HSUV has a Excellent long-term physical property and impact strength.Excellent environment stress crack resistance (ESCR), water resistance and impact strength by applying hexene comonomer.

Envir® PA6G3OHL-BK0701 is a 30% glass fiber reinforced nylon 6 molding resin, it is heat stabilized and hydrolysis resistant. 6G30HL is optimized for properties and processability. It is provided black in color.

Neoplast™ 163 FT EB are strong, flexible materials providing excellent sealing, esthetics, long term performance compared to thermoset rubbers and PVCs.

SOULEFLEX® SA8N-U01 is Cost Effective Adhesion Technical Grade-Bonding to ABS, PC and ABS/PC

PPS-SG403E65 PPS is a 40% glass fiber reinforced polyphenylene sulfide compound developed to provide excellent engineering properties and processability

Yparex® 0F0024 is a family of maleic-anhydride-(MAH)-functionalised polyolefins. For each of its many application areas Yparex® has suitable grades. The grades are characterized by density and melt flow index, melting temperature and the level of functional groups. Functionality for the varying application range is also obtained by using a large array of different base polymers and production technologies. The materials are produced under the highest quality standards allowing no residual unbonded maleic anhydride in the final product.

HENAN SHENMA HUAWEI PLASTIC B2730G is used in Mechanical guard, Wind blade gear, Power tools, etc.

RIGIDDI-PAK R-4242/4243Low cost, fast set potting compounds with excellent properties and FAST TURNOVER. R-4242/4243 are 1:1 by weight or volume, making them ideal for hand pour or automatic metering systems.

FORMPOLY® N6ST60 offers a wide range of Nylon 6 grades from unfilled, glass fiber reinforced, mineral reinforced to flame retardant including FORMPOLY N6ST60 which is lubricated Nylon 6 with very high impact and moderate mechanical properties.

PPS based, thermally conducting, electrically insulating grade with improved processability.

Nemcon™ H-series products are designed for use in high performance electronic assemblies where heat removal is critical to system performance. Nemcon™ H ES DP110/X3 is a thermally conductive polycarbonate alloy, combining good thermal conductivity with improved HDT and processability relative to conventional polycarbonate compounds.

FRbleno PA66-1301 is 25% glass fiber reinforced, flame retardant polyamide 66 compound. This grade offers ignition resistance, balance of strength and excellent processing.

Neoplast™ 155 FT EB are strong, flexible materials providing excellent sealing, esthetics, long term performance compared to thermoset rubbers and PVCs.

RIGIDDI-PAK R-4806 & R-4807 A/BLow viscosity, fast cure, high performance, potting and encapsulating compounds with excellent properties and FAST TURNOVER. Both are two part systems with 1:1 mix ratios by volume.

Neoplast™ 173 FT EB are strong, flexible materials providing excellent sealing, esthetics, long term performance compared to thermoset rubbers and PVCs.

Hax™ HFX 519HS by Fainplast Compounds is comprised of Polyolefin (unspecified). It is commonly used for a variety of applications. .

Outline: FZ-6600 is a glass fiber and mineral filled linear type polyphenylene sulfide compound that is well balanced with excellent engineering properties and processability. Color: Black

Neoplast™ 173 M/E are strong, flexible materials providing excellent sealing, esthetics, long term performance compared to thermoset rubbers and PVCs.

Neoplast™ 145 FT EB are strong, flexible materials providing excellent sealing, esthetics, long term performance compared to thermoset rubbers and PVCs.