Products in Other Electrical & Electronics Applications

Hernon Tuffbond® 304 is a modified epoxy adhesive that provides a very fast room temperature cure. Tuffbond® 304 exhibits very good moisture chemical and heat resistance. This very fast cure epoxy adhesive is specially formulated for rapid in-line assembly of loud speakers. Tuffbond® 304 is also recommended for bonding metals, wood, ceramics, etc., and can be used for potting and encapsulation of electrical and electronic components.

Hernon Tuffbond® 305 is a modified epoxy adhesive that provides a very fast room temperature cure. Tuffbond® 305 exhibits very good moisture chemical and heat resistance. This very fast cure epoxy adhesive is specially formulated for rapid in-line assembly of loud speakers. Tuffbond® 305 is also recommended for bonding metals, wood, ceramics, etc., and can be used for potting and encapsulation of electrical and electronic components.

Hernon Tuffbond® 302 is a modified epoxy adhesive that provides a very fast room temperature cure. Tuffbond® 302 exhibits very good moisture chemical and heat resistance. This very fast cure epoxy adhesive is specially formulated for rapid in-line assembly of loud speakers. Tuffbond® 302 is also recommended for bonding metals, wood, ceramics, etc., and can be used for potting and encapsulation of electrical and electronic components.

Hernon HASA® 722 is a single-component, anaerobic, structural adhesive designed for bonding rigid assemblies. HASA® 722 cure is accomplished when mating surfaces including metal, glass and ceramics are joined together. Accelerated cures are possible with the application of primers or by a short, low temperature heat cycle. Upon cure, HASA® 722 is a highly crosslinked thermoset plastic with excellent properties over a wide range of conditions.

Hernon HASA® 716 is a single component structural anaerobic adhesive formulated for bonding rigid assemblies at high temperatures. HASA® 716 cures when it is confined between mating surfaces. Hernon® Primer 50 accelerates the cure.

Solfre 2 Clear offers a two component clear polyurethane - a UV stable adhesive, suitable for glass, acrylics and polymeric materials. It is an ideal solution for a number of applications such as potting, encapsulating, laminating of glass or bonding clear acrylic/polycarbonate sheets to a wide variety of metallic and polymeric materials.

Dalian Yuanyong Organosilicon Phenyl Siliconegum (RTV) in addition to the excellent electrical properties, corrosion resistance, ozone resistance, also has good resistance to low temperature performance of irradiation, self-extinguishing and ablation resistance. Can be used for a variety of original electronic potting materials, and materials for dipping impression and stripping, a component of binder. At minus 120 ℃ under the condition of low temperature remains resilient, available for special purposes.

Sinobase Polymers Chemical AC-04 is a slightly yellowish powder that is stable at room temperature. Soluble in alkali, insoluble in acid, pyridine, benzene, gasoline and water and there is no toxicity or contamination..

PERGAPROP BIB-40 PP-G is Di-(2-tert.-butyl-peroxyisopropyl)-benzene 40%, Granules with Polypropylen.PERGAPROP BIB-40 PP-G is used for the production of controlled rheology polypropylene (CR-PP).

Atlantic Metals & Alloys Bismuth is a metal used in pigments, ceramics, low melting point alloys, etc.

PEROXAN C126 is Dimyristyl peroxydicarbonate Flakes.PEROXAN C126 is used for the (co)polymerization of vinylchloride and vinylidenechloride.

Ketoprix™ EK73 and EKT73 resins are thermoplastic aliphatic polyketones containing a 1,4-diketone backbone structure. They are produced from ethylene, propylene and CO with perfectly alternating olefin and CO monomers in the backbone.

BESTDUR® TXG4 /01 is Polybutylene Terephthalate (PBT) resins with excellent mechanical properties, heat resistance and good dimensional stability. BESTDUR can contain different reinforcements, modifiers and colors in almost all its grades as well as V-0 flame retardant grades.

Ultracor UQF-314-3/8-3.0 is used in double shell reflectors, radomes and other lightly loaded structures requiring Quart’s dielectric properties.

Superior Graphite 2939APH is a purified flake product manufactured using Superior Graphite’s proprietary electro-thermal purification technology. This continuous high-temperature process exposes flake graphite to extremely high temperatures so that impurities, including inorganic contaminants, are sublimed. 2939APH is the fine size grade of the 'Thermally Purified Flake' product line produced using Superior Graphite’s dedicated milling and screening technology. Main uses are coefficient of friction reduction, wear reduction, coatings and as a relatively inexpensive battery material performance additive.

Finomide 1160 is a reactive polyamides which are utilized primarily as curing agents for epoxy resins used in surface coatings ,Adhesives, Decorative Coatings, Laminations, Pottings.

CCP STAB PDP also called DHOP is applied in PU, PVC, engineering plastics and contains features such as color improvement and high heat stability.

Neelanjana Polymers Yellow Pigments provides a very pleasing color that is evoked by the light stimulating both the long (L) and medium (M) wavelength cone cells of the retina. Though it equally stimulates the L and M cone cells, it does not stimulates the S (short-wavelength) cone cells of the retina. The wavelength of the Yellow light is 570–580 nm, which is suitable mixture of green and red.

NYPOL® A3 G20 V10 PRTA010 NR302 MSP is a 6.6 black polyamide with 30% mixed load

ULTRA-PLAST™ WF101 contains amide, which has reactive sites available for hydrogen bonding and can therefore act as a coupling agent between polymer and filler. ULTRA-PLAST™ WF101 acts as an efficient blending and dispersing agent in wood filled systems, leading to a more homogeneous blend. ULTRA-PLAST™ WF101 works as an excellent lubricant under high shear conditions, for example injection molding.

FR‐31L is an additive flame retardant used in PVC, flexible polyurethane foams, plastics. whose superiority is demonstrated in very low scorch, low volatility, excellent hydrolytic stability, low fogging and processing characteristics.

Armlen PP E/P 20-2 is a elasticized, frost resistant composite material. Designed for molding of bodywork for electrical and general goods. Available in natural and black colors.

Trecora Chemical OX-7 is an oxidized polyethylene wax. It is easily emulsified. Salt spray resistance of an exterior coating that will be exposed to severe weathering can be improved by adding a barrier enhancing wax. Unwanted transfer or adhesion of coating to a contacted surface is thus prevented. Provides anti-block, release and gloss control properties. Imparts a non-stick character to a coating that decreases the tendency for blocking. Can aid in the resistance properties of a coating. Can be used to control gloss to achieve a desired matt effect. OX-7 by Trecora Chemicals is used in powder coatings, can coatings, coil coatings and wood/furniture coatings.

Aluchem Calcined Alumina (Unground) AC-1 is made by firing a source alumina at various temperatures, depending upon desired level of calcination (burn), into alpha alumina varying from 5-100% moving it to its densest and most stable form.

ACTFLOW® CBB-3098 is a non-solvent functional and reactive acrylic polymer of low-molecular-weight that have come out of molecular weight control technology. Due to its environmentally sound characteristics as a non-solvent liquid polymer and excellent normal-temperature fluidity, ACTFLOW® is recommended as a plasticizer replacement, modifying agent and additive agent..

Vatan Plastik San. Tic. AS ANTISTATIC MB 071 PE produced while carrying out production in polyoefins, static electric is gathered on the plastic product. Therefore, product gather excessive amount of dust. Such products used in automatic packaging machinery causes damage because of static electricity. Anti-static concentrated usage prevents the occurrence of static electric on the plastic product.

GS® 825 Sealant is one of the most chemically advanced silicone based extruded sealants on the market and was primarily formulated for applications that see extremely high temperatures such as furnaces, ovens, and water heaters.

Sunlube EBS is in bead form and chemically known as Ethylene Bis Stearamide.

Tape Rite 249-L Lead Foil Tape is a heavy lead foil with acrylic adhesive. It can be used for electroplate masking, radiation shielding, chemical milling, masking x-ray plates, adjusting swing weight on golf clubs and simulated lead caning on windows. It has an excellent shelf life.

ROMILOY® 1015 ER is PC/ABS, extrusion and injection molding grade, high-impact, high heat resistance.

JRCure-1022 is light yellow powder in appearance.

NIRETAN B 30 N is regionally available in Europe.

NC10004008T-Nickel-coated Carbon Nonwovens NC10004xxxTWet-laid nonwoven of chopped Ni/Carbon fiber staple (~50% Ni, 7-um diameter, 3-25 mm) with 10-20% x-linked polyester binder. Basis weights from 8 g/m² up to 34 g/m² available.