Products in Adhesives & Sealants: Durable

RTV167 adhesive sealants from Momentive Performance Materials are one-component, ready-to-use electronic grade silicone sealants. They cure to a tough, resilient silicone rubber on exposure to atmospheric moisture at room temperature. These electronic-grade silicone adhesive sealants differ somewhat in physical properties including consistency.

RTV103 one-component, ready-to-use adhesive sealants are extremely versatile. They cure to a tough, durable, resilient silicone rubber on exposure to atmospheric moisture at room temperature. Acetic acid vapors are released from the sealant surface as a by-product of cure. RTV102, RTV103, RTV106, RTV108, RTV109, RTV112, RTV116 and RTV118 one-component, ready-to-use adhesive sealants are extremely versatile. They cure to a tough, durable, resilient silicone rubber on exposure to atmospheric moisture at room temperature. Acetic acid vapors are released from the sealant surface as a by-product of cure. Since all these sealants utilize a moisture cure system, they must not be used in thicknesses of greater than 6mm (1/4 in.). Where section depths exceed 6mm (1/4 in.), Momentive Performance Materials one component, addition cure or two-component silicone rubber compounds are recommended.

RTV162 adhesive sealants from Momentive Performance Materials are one-component, ready-to-use electronic grade silicone sealants. They cure to a tough, resilient silicone rubber on exposure to atmospheric moisture at room temperature. These electronic-grade silicone adhesive sealants differ somewhat in physical properties including consistency.

8329TFF is a 2-part, flame retardant, thermally conductive epoxy adhesive with a 5-minute working time. It is an off white, smooth, thixotropic paste that cures to form a hard, durable polymer that is thermally conductive, yet electrically insulating. This thermal glue is often used to bond heatsinks to CPUs, LEDs and other electronics components. This product has a very short working time. For a longer working time, use 8349TFM or 8329TFS.

Thermal Adhesive 8349TFM is a 2-part, flame retardant, thermally conductive epoxy adhesives. It is a dark gray, smooth, thixotropic paste that cures to form a hard, durable polymer that is thermally conductive, yet electrically insulating. This thermal adhesive is most often used to bond heatsinks to CPUs, LEDs and other electronics components. For a shorter working time, use 8329TFF. For a longer working time, use 8329TFS.

8329TFM is a thermally conductive two-part epoxy adhesive. It is dark gray, smooth, thixotropic, and bonds well to a wide variety of substrates. This product is used to bond heat sinks, LEDs, and other heat-generating components in electronic assemblies. It is suitable for use with dual-syringes, mix-tips, and automatic dispensing systems. For a faster working life, use 8329TFF. For a longer working life, use 8329TFS.

RTV106 one-component, ready-to-use adhesive sealants are extremely versatile. They cure to a tough, durable, resilient silicone rubber on exposure to atmospheric moisture at room temperature. Acetic acid vapors are released from the sealant surface as a by-product of cure. RTV102, RTV103, RTV106, RTV108, RTV109, RTV112, RTV116 and RTV118 one-component, ready-to-use adhesive sealants are extremely versatile. They cure to a tough, durable, resilient silicone rubber on exposure to atmospheric moisture at room temperature. Acetic acid vapors are released from the sealant surface as a by-product of cure. Since all these sealants utilize a moisture cure system, they must not be used in thicknesses of greater than 6mm (1/4 in.). Where section depths exceed 6mm (1/4 in.), Momentive Performance Materials one component, addition cure or two-component silicone rubber compounds are recommended.

RTV108 one-component, ready-to-use adhesive sealants are extremely versatile. They cure to a tough, durable, resilient silicone rubber on exposure to atmospheric moisture at room temperature. Acetic acid vapors are released from the sealant surface as a by-product of cure. RTV102, RTV103, RTV106, RTV108, RTV109, RTV112, RTV116 and RTV118 one-component, ready-to-use adhesive sealants are extremely versatile. They cure to a tough, durable, resilient silicone rubber on exposure to atmospheric moisture at room temperature. Acetic acid vapors are released from the sealant surface as a by-product of cure. Since all these sealants utilize a moisture cure system, they must not be used in thicknesses of greater than 6mm (1/4 in.). Where section depths exceed 6mm (1/4 in.), Momentive Performance Materials one component, addition cure or two-component silicone rubber compounds are recommended.

RTV102 one-component, ready-to-use adhesive sealants are extremely versatile. They cure to a tough, durable, resilient silicone rubber on exposure to atmospheric moisture at room temperature. Acetic acid vapors are released from the sealant surface as a by-product of cure. RTV102, RTV103, RTV106, RTV108, RTV109, RTV112, RTV116 and RTV118 one-component, ready-to-use adhesive sealants are extremely versatile. They cure to a tough, durable, resilient silicone rubber on exposure to atmospheric moisture at room temperature. Acetic acid vapors are released from the sealant surface as a by-product of cure. Since all these sealants utilize a moisture cure system, they must not be used in thicknesses of greater than 6mm (1/4 in.). Where section depths exceed 6mm (1/4 in.), Momentive Performance Materials one component, addition cure or two-component silicone rubber compounds are recommended.

XtraBond® HT is a one part, easy to use, non-slumping paste that cures to a silicone rubber when exposed to atmospheric moisture at room temperature. This product is engineered to provide a durable, watertight bond when exposed to continuous temperatures ranging from -40° to 500°F on a continuous basis – while maintaining its integrity at up to 600°F for intermittent time periods. Its unique formulation acts as both a thermal and electrical insulator as well, so it is ideal for sealing around heating elements.

CGSTAPE - 7858 (1) is a CGS’s top coated white polyimide film for electronics labeling is coated with an aggressive acrylic adhesive and backed with a kraft release liner.

Tough-Seal 24 A a tough and durable two component, hybrid epoxy elastomer that features a higher viscosity than KEY Tough-Seal 22 to limit lateral flow in “glob top” encapsulation. KEY PC2024A/Bis a superior electrical potting compound with excellent thermal cycling performance.

Tough-Seal 22 A is a tough and durable two component, hybrid epoxy elastomer that features a longer gel time than Tough-Seal 21. Tough-Seal is a superior electrical potting compound with excellent thermal cycling performance.

Tough-Seal 41 A is a flame retardant version of Tough-Seal 21. Self-extinguishing flame retardant performance has been validated by UL and KEY Tough-Seal 41A/Bhas achieved a UL94V-0 rating. KEY Tough-Seal 41A/Bachieves flame retardant properties without antimony and brominated compounds.

Tough-Seal 31 A is a tough and durable two component, hybrid epoxy elastomer that features a lower viscosity than Tough-Seal 21. Tough-Seal is a superior electrical potting compound with excellent thermal cycling performance. Tough-Seal has the flexibility of a urethane and the service temperature of an epoxy.

Atom Adhesives AA-DUCT 916 is an electrically conductive, silver-filled epoxy formulation recommended for electronic bonding, coating, and sealing applications that require high flexibility coupled with good electrical and mechanical properties.

CSL Silicones CSL588 Electronic Grade Silicone Sealant / Adhesive is one part, moisture cure, room-temperature vulcanizing (RTV), electronic grade 100% silicone sealant that cures to form a tough, permanently flexible rubber. The non-corrosive curing system makes it ideally suited for protecting, sealing and insulating corrosion-sensitive electrical and electronic materials such as copper, brass and silver. CSL588 has excellent dielectric properties, high surface resistivity and repels water to protect sensitive electronic components. CSL588 has superior resistance to weathering including ozone, ultraviolet radiation and airborne chemicals.

Tough-Seal 32 A is a tough and durable two component, hybrid epoxy elastomer that features a lower viscosity than Tough-Seal 22 and a longer gel time than Tough-Seal 31. Tough-Seal is a superior electrical potting compound with excellent thermal cycling performance. Tough-Seal has the flexibility of a urethane and the service temperature of an epoxy.

Tough-Seal 42 A is a flame retardant version of Tough-Seal 22. The self-extinguishing flame retardant performance meets UL 94V-0 requirements and has been validated by UL for the official rating. KEY Tough-Seal 42A/Bachieves flame retardant properties without antimony or halogenatedcompounds. Like Tough-Seal, it is a tough and durable two component, hybrid epoxy elastomer that features excellent thermal cycling and exceptional flexibility.

Tough-Seal 21 A is a tough and durable two component, fast gelling, hybrid epoxy elastomer electrical potting compound with excellent thermal cycling performance. KEY Tough-Sealhas the flexibility of a urethane and the service temperature of an epoxy.

Atom Adhesives AA-DUCT 916LC is an electrically conductive, low cost silver filled epoxy formulation recommended for electronic bonding, coating, and sealing applications that require high flexibility coupled with good electrical and mechanical properties.

Tough-Seal 23 A a tough and durable two component, hybrid epoxy elastomer that features a higher viscosity than KEY Tough-Seal 21 to limit lateral flow in “glob top” encapsulation. KEY PC2023A/Bis a superior electrical potting compound with excellent thermal cycling performance.