Products in Adhesives & Sealants: Flexible

Black Flexible Urethane 8800 is a black, 2-part, flexible polyurethane resin. It has a low mixed viscosity and maintains excellent flexibility at low temperatures. In addition, this flexible urethane adheres strongly to a wide variety of substrates, including metals, composites, glass, ceramics, and many plastics. It is a cost-effective flexible potting option that provides exceptional physical protection and creates minimum stress on circuit boards and surface-mounted devices. It offers superior moisture resistance and is an ideal choice for harsh environments, especially saltwater exposure and marine applications.

UB-907FL is a two-component, industrial grade polyurethane adhesive system. Once cured, it forms a highly flexible bond line which provides peel and shear strength. It is deal for bonding a variety of metals, as well as plastics, glass, wood, and more. Can also be used for potting and encapsulating strain and heat sensitive electronic components.

SR8850-1 is a room temperature curable, silver coated copper filled, electrically conductive RTV silicone sealant/adhesive. It can be used as a coating if dissolved or diluted with low boiling point solvent, such as naphtha. The material has no corrosive by-products and has good adhesion properties to metals, plastics, silicones, ceramics and glass. It is useful for bonding large area substrates and components of any size. The material is provided as a one-part electrically conductive elastomer/silicone with a compatible primer. The silicone cures when exposed to atmospheric conditions. The typical curing schedule is 24 hours at 25°C and 60% relative humidity. Using a large volume of paste requires a cure schedule of 48 hours at 25°C and 60% relative humidity.

ME7158 is a reworkable, aluminum nitride filled, electrically insulating and thermally conductive epoxy paste adhesive. It exhibits outstanding flexibility for bonding materials having highly mismatched CTE's (i.e., alumina to aluminum, silicon to copper). The very high thermal conductivity of this material makes it useful for bonding high-powered, large area die and components. It can be readily reworked at 80-150°C with torque or peel stress.

ESP7666-FOW is the modified boron nitride filled thermally conductive version of the high flow DAF of ESP7660-FOW. It is a high-bond strength epoxy film adhesive tor high flow when melted to easily flow over Wire-bond in stack chip die attach application. This new generation wafer level die- attach film is flexible before curing. This ESP7660-FOW is mounted onto the back of the wafer at 80-100°C, which is then diced into predetermined sizes using standard dicing tape. Depending on the different dicing tape used and with suitable releasing action such as UV or heat, the diced chip is picked and placed directly onto a lead frame or substrate. It is designed for bonding component and substrate to substrate and carrier with matched thermal coefficients of expansion. ESP7660-FOW has good thermal stability. The dry, tack-free handling of the film makes it suitable for an automated assembly.

117-33 is a flexible, electrically conductive, silicone pressure sensitive adhesive. The overall balance of peel strength, cohesion, lap shear strength and high temperature holding power provides a versatility that makes this product useful in a wide range of fastening and bonding applications. This product is very resistant to flexing and creasing. Some applications for 117-33 include, polymer thick film circuitry, and electrical attachments for stress sensitive devices. 117-33 is one of the few conductive adhesives that can bond to silicone substrates and surfaces. In addition, it can be bonded to some types of Teflon® surfaces.Features High-temperature flexible conductive adhesive

ME7159 is a reworkable, diamond filled, electrically insulating and thermally conductive epoxy paste adhesive. It exhibits outstanding flexibility for bonding materials with highly mismatched CTE's (i.e., alumina to aluminum, silicon to copper). The ultra high thermal conductivity of this diamond filled material makes it useful for bonding high-powered, large area die and components. It can be readily reworked at 80-100°C.

114-26 B is a medical grade, electrically conductive, polymer coated polyester film composition. It is typically used as a component for fabricating electrodes in medical testing applications. This product has been formulated to have improved conductivity and high electrical dissipation properties. Some added applications for 114-26 B include, but are not limited to, emi/rfi shielding, polymer thick film circuitry, membrane switches and electrical static dissipation. 114-26 B is available in rolls ranging in widths up to 20 inches and lengths up to 2000 feet.

ME7857-SC is a medium viscosity, silicon carbide filled, flexible epoxy for snap curing application. It is a reworkable, electrically insulating and thermally conductive epoxy paste adhesive. It exhibits outstanding flexibility down to -60°C. Ideal for bonding materials having highly mismatched CTE's (i.e., alumina to aluminum, silicon to copper). The stress-free flexible adhesive maintains good stable bond strength of 100 psi from 150-250°C and has outstanding thermal stability.

MEB650-DA is a low viscosity silver filled flexible epoxy paste. This low ionic silver-filled paste is reworkable, solvent free, and electrically and thermally conductive. It is ideal for automatic dispensing in die- attach application with fine definition. Absolutely solvent-free and diluent free composition with low ionic impurities for high reliability. It exhibits outstanding flexibility for bonding materials having highly mismatched CTE's (i.e., alumina to aluminum, silicon to copper). This stress free adhesive shows consistent medium bond strength up to 250°C at 200 psi.

FLASHBOND™ UV-8504E is a low viscosity, fast curing, light-curing epoxy adhesive that offers excellent strength wetting properties. UV-8504E cures to a high Tg, rigid polymer with excellent adhesive to metals, ceramics, and glass.This product requires direct light exposure during cure. UV-8504E can cure fully in 30 seconds using optimal cure conditions. Due to the variability of different UV/LED light sources, it is suggested that the user test and specify intensity and exposure time. This product will cures best in the UVA wavelengths (315-365nm). FLASHBOND™ UV-8504E has been tested to and passes ISO-10993-5 standards for cytotoxicity.

EPOXIBOND™ EB-155 is an undiluted, unfilled, low viscosity clear epoxy system that exhibits exceptional resistance to impact and thermal shock. This system has low exotherm and long work life. Applications includes, high bond strength adhesive for most similar and dissimilar substrates; LED displays, any fiber optic application. It can also be used for making in-place laminates or for protective coating on metals etc. Also it can be used for semi-rigid, moisture proof, gas tight seals between plastic and metallic or other substrates. This is also recommended for potting devices such as connector shells from which rigid or flexible wires may protrude directly through the epoxy.

TP7155 is an aluminum oxide filled, medium bond strength thermoplastic film adhesive designed for bonding die, component, and substrate. It has good thermal conductivity. The dry, tack-free handling of the film makes it suitable for automated assembly. TP7155 is designed for bonding parts that may be operaung at 160 continuously. If excessive tensile stress is expected at temperature above 150°C, additional mechanical support may be considered.

EG7658 is a reworkable, aluminum nitride filled, electrically insulating and thermally conductive epoxy paste adhesive. It which exhibits outstanding flexibility for bonding materials with highly mismatched CTE's (ie., alumina to aluminum, silicon to copper). The high thermal conductivity and flexibility make it excellent for bonding high-powered, large area die and components. EG7658 can be reworked using temperatures higher than the cure temperature from 80-150°C to soften the bond line. Use a tool adequate to break the bond and remove. Clean any residue with a solvent which will not damage the parts.

ME7155 is a reworkable, alumina filled, electrically insulating and thermally conductive epoxy paste adhesive. It exhibits not only outstanding flexibility for bonding materials having highly mismatched CTE's (i.e., alumina to aluminum, silicon to copper), but also exhibits high level of uniformity and consistency in appearance and smoothness of texture, yielding potential ease of use and success in applications. The high thermal conductivity of this material makes it useful for bonding high-powered, large area die and components. MEZ155 can be readily reworked at 80-1502.

TC8750 is a silver-filled, B-staged epoxy film adhesive. It is designed for bonding component and substrate to a mismatched substrate or carrier. Its low Tg imposes minimum thermal stress on bonded parts during thermal cycling or shock testing. It has excellent thermal conductivity and can be used for most applications at temperatures from -65 to 150°C. It is reworkable at 80-150°C. Customers must test the adhesive for their specific applications to confirm its suitability. TC8750 is designed to meet the hybrid adhesive specification MIL-STD-883; Method 5011. It exhibits low outgassing at 125°C and passes NASA Outgassing requirements.

RTK7556 is a reworkable, boron nitride-filled, tacky epoxy film adhesive. It is designed for bonding component and substrate to a mismatched substrate or carrier. This B-staged conductive adhesive offers excellent reworkabilty at 80-150°C. RTK7556 has high thermal conductivity and the low Tg adhesive imposes minimum thermal stress on bonded parts during thermal cycling or shock testing.

Tack-film TK7758 is a reworkable, aluminum nitride-filled, electrically insulating epoxy film adhesive. It is designed for bonding die, component and substrate to a mismatched substrate or carrier. This B-Staged conductive adhesive offers excellent reworkability at 80-150°C and is storable at-40°C for one year. TK7758 has excellent thermal conductivity. Its low Tg adhesive imposes minimum thermal stress on bonded parts during thermal cycling or shock testing

105-48 is a flexible, semi-conductive, silicone, pressure sensitive adhesive. The overall balance of peel strength, cohesion, lap shear strength and high temperature holding power provides a versatility that makes this product useful in a wide range of fastening and bonding applications. This product is very resistant to flexing and creasing. Some applications for 105-48 include, but are not limited to, electrostatic discharge, polymer thick film circuitry and membrane switches.Features Semi-conductive pressure-sensitive adhesive

102-32G1 is a flexible electrically conductive silicone adhesive. 102-32G1 features the highest degree of thermal and mechanical reliability over any other conductive adhesive technology and provides no failures during thermal cycling, heat aging, shocking or vibration due to the reliability from the elasticity of theproduct. Some applications for 102-32G1 include, but are not limited to, elastomeric conductive bridging and bonding, conductive bonding of low surface energy materials, conductive via filling and electrical attachments for stress sensitive devices. 102-32G1 is one of the few conductive adhesives that can bond to silicone substrates and surfaces. In addition, it can be bonded to some types of Teflon® surfaces. 102-32G1 features better conductivity than 102-32 when cured at lower temperatures

102-32D is a flexible, electrically conductive, silicone-based ink and adhesive. The overall balance of peel strength, cohesion, lap shear strength and high temperature holding power provides a versatility that makes this product useful in a wide range of fastening and bonding applications. This product is very resistant to flexing and creasing. Some applications for 102-32D include, but are not limited to, emi/rfi shielding of polyimide flexible circuits, polymer thick film circuitry, and electrical attachments for stress sensitive devices. 102-32D is one of the few conductive adhesives that can bond to silicone substrates and surfaces. In addition, it can be bonded to some types of Teflon® surfaces.Features Excellent Bonding to Difficult Surfaces. High Temperature Resistance. Wide Range of Applications.

ME8650-RC is designed for needle dispensing and screen-printing processing. This silver filled conductive die-attach adhesive can be rapidly cured at low temperatures. This single component, silver filled paste is ambient storable electrically and thermally conductive. It is highly thixotropic with minimal sag. ME8650-RC has been designed to minimize bleeding on both silver plated copper and alloy 42 lead frames. Maintains more than 100 psi bond strength at 250°C for wire-bonding.

ESP8450-WL is a high melt-flow version of standard ESP8450 designed for large area bonding and wafer-level lamination for stack-chip applications. It is a solvent resistant, silver-filled, flexible epoxy film adhesive designed for bonding die, component and substrate to a mismatched substrate or carrier. This novel, B-staged electrically conductive adhesive offers excellent flexibility from-55°C to 150°C. The dry, tack-free handling of the film makes it ideal for an automated pick and place assembly and is reworkable from 80°C to 150°C. ESP8450-WL has excellent thermal conductivity and its low Tg adhesive imposes minimum thermal stress on bonded parts during thermal cycling or shock testing.

EG7655 is a reworkable, alumina filled, electrically insulating and thermally conductive epoxy paste adhesive which exhibits outstanding flexibility for bonding materials with highly mismatched CTE'S (i.e., alumina to aluminum, silicon to copper). EG7655's high thermal conductivity and flexibility make it excellent for bonding large area substrates, components and heat sinks where thermal management is critical. EG7655 exhibits reduced bond strength at 80-100°C for easier rework. The cured adhesive is flexible with Type A hardness of 80 and tensile elongation of more than 30%.

ThreeBond Europe SAS TB3001C is a one component solventless adhesive which can be cured by UV and visible light between 200 and 440 nm. TB3001C is particularly fitted to the adhesion and sealing of electrical and electronic components and provide as well an excellent mechanical and chemical resistance.

Silductor 6201 is an electrically conductive silicone adhesive.

Polytec TC 411 is a pasty, two component epoxy with curing at room temperature, used for thermal management in electronics, hybrid technology, sensor technology and power engineering. Polytec TC 411 has a great thermal conductivity and an excellent adhesion to ceramic, glass, semiconductor materials, metals and most plastics. The application can be performed directly from the side-by-side cartridge with a static mixing nozzle, using a dispensing gun.

Sil-Flex SL RTV-7525 (Neutral) is a self-leveling one component, low modulus, neutral cure silicone sealant and adhesive. When fully cured, this unique VOC compliant formula offers UV stability and tenacious adhesion. It is frequently used for coating electronic components and terminals or sealing pitch pockets and window seams. This product is specifically formulated to offer all weather performance to meet today's Green Building Standards.

APPLI-TEC 0720 Polysulfide is a one‐component, gray, thermally conductive, precision mixed, degassed, and frozen polysulfide adhesive. It is fuel resistant material that is flexible when cured and is compliant with HMS 16‐1985, Compound V, Class 3 and HP 16‐103, Type VII, Class 3 specifications. 0720 can be cured at either room or elevated temperatures followed by a room temperature cure. This material is thixotropic when applied and features a very low glass transition temperature as well as having a thermal conductivity of 0.8 (W/mK). It has a long pot life of 2 hours and is an ideal filet material. Along with fuels, 0720 is resistant to lubricants, oils, water, and weather and bonds well to most substrates including aluminum, magnesium, titanium, and steel.