Products in Electronics Coatings: Epoxy & Epoxy Derivatives

ALBIFLEX® 297 is a bisphenol-A-epoxy-silicone block copolymer resin that excels in crafting high-performance elastomers. This versatile liquid, responsive to epoxy, seamlessly cures when combined with aliphatic and cycloaliphatic epoxy resin curing agents. ALBIFLEX® 297 accommodates various conventional casting and molding techniques for your manufacturing needs.

jER™ YX4000 is a biphenol-type solid epoxy resin with significantly low melt viscosity, low water absorption and a good balance between adhesiveness and rigidity against stress. It can be used for electrical and electronic applications. jERTM YX4000 is an adduct formed from the reaction of epichlorohydrin and tetramethylbiphenol FeaturesAbrasion, heat and water resistanceElectrical insulationWear resistanceProduct HighlightsSignificantly low melt viscosity (melting point: 108°C)Low chroline contentLow water absorption ApplicationsElectrical and electronic applications (EMC, solder resist, PCB)Potting and encapsulation materialsPowder coatings for ship bottomsAdhesivesComposites *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ 4250 is a hybrid bisphenol A/bisphenol F-type epoxy resin that is more flexible than conventional polymer-type epoxy resins. It can be used as an additive to add toughness, insulating and vapor barrier properties and resistance to heat, water and chemicals to a variety of applications. FeaturesPolymer-type epoxy resin with epoxy functional groups at the both endsHigh molecular weightHigh softening points Good adhesionApplicationsPCM, CAN and other coatingsPaintThermoplastics Printed electronics Plastic processing *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YX7110 is a tough and flexible liquid-type epoxy resin. It can be used as an impact modifier for brittle materials, as an additive to increase impact resistance, and for stress relaxation to avoid cracking and warpage. jER™ YX7110 is an adduct formed from the reaction of epichlorohydrin and an aliphatic and aromatic polyol. Features Adduct formed from the reaction of epichlorohydrin and an aliphatic and aromatic polyol Crack and impact resistance Excellent flexibility and elasticity High viscosity Low warpage Maintains flexibility even after full-curing Applications Coatings Adhesives Composites Potting and encapsulation materials Base film/sheet for wearable devices *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YX7105 is a liquid-type epoxy resin with toughness, flexibility, and high stretchability. It is used as an impact modifier for semiconductor, printed electronics and wearable devices to avoid bending and warpage. jER™ YX7105 is an adduct formed from the reaction of epichlorohydrin and an aliphatic and aromatic polyol.FeaturesExcellent adhesionGood toughnessGood mechanical, impact and crack resistanceExcellent elasticity and flexibilityApplicationsPrinted electronics (resist ink, build-up wire board, flexible printed wire board, metal core printed circuit board)Semiconductor manufacturing (liquid mold compound, underfill, sidefill, diebonding, ACF, NCF, ACP, NCP)Base film and sheet for wearable devicesCoatingsAdhesives *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YX7400N is an adduct formed from the reaction of epichlorohydrin and an aliphatic polyol.FeaturesAdduct formed from the reaction of epichlorohydrin and an aliphatic polyolExcellent elasticityImpact resistanceApplicationsConsumer appliances and electronicsElectrical devices, assemblies, parts and componentsElectronics adhesivesElectrical and electronic packaging and assemblySpecialty and conformal coatingsPotting compoundsPrinted circuit boards (PCBs)Semiconductor manufacturing*jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ 1256 is a solid epoxy resin produced from Bisphenol A epoxy resin. It is a polymer-type epoxy resin with epoxy functional group at the both ends. It can be used to add toughness, insulating and vapor barrier properties, and resistance to heat, water and chemicals in a variety of applications. FeaturesHigh molecular weightHigh softening pointsGood film formerHydrolysis resistanceFlexibilityStrong adhesionApplicationsPCM, CAN, and other coatingsPaintsFiber-reinforced materialsThermoplasticsPrinted electronicsPlastic processing *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Farboset® 9081 is a nonanhydride epoxy powder coating specifically formulated for low-temperature applications, making it suitable for heat-sensitive electronic components. It is ideal for encapsulating film and ceramic capacitors that require processing at low temperatures. This compound can be applied using various techniques such as fluidized bed coating, wheel coaters, or electrostatic spray methods.

Farboset® 9025 is a nonanhydride epoxy powder coating that is specifically formulated for use as an encapsulant for electronic components. One of its key characteristics is its excellent resistance to cracking during thermal cycling, which makes it ideal for applications where electronic components are subjected to temperature variations. This epoxy powder coating is designed for coating various electronic components, including resistor networks, hybrid circuits, varistors, and ceramic capacitors.

Farboset® 9544 is designed for coating a variety of electronic components, including resistor networks, hybrid circuits, varistors, and ceramic capacitors. Its resistance to cracking during thermal cycling is a valuable feature for maintaining the integrity of these components when subjected to temperature variations. Additionally, it can be applied using wheel and fluid bed equipment, providing flexibility in the coating process.

Farboset® 9146 is a nonanhydride epoxy powder coating with a dielectric grade, making it suitable for applications where superior electrical and moisture resistance is required. This compound is designed for encapsulating various electronic components, including hybrids, mica capacitors, and other semiconductor-grade devices that demand high purity and optimal moisture performance. Its excellent adhesion characteristics make it an ideal choice for chip on board applications.

Farboset® 9020 is a nonanhydride epoxy powder coating known for its excellent moisture resistance. It is specifically designed for encapsulating components such as ceramic and film capacitors, coils, thermistors, and resistors. This coating helps protect these components from moisture and environmental factors, ensuring their performance and reliability. Farboset® 9020 can be applied using various methods, including fluidized bed, wheel coaters, and electrostatic spray techniques.

Super Shield™ Silver Coated Copper Epoxy Conductive Paint 843ER is a 2-part epoxy-based conductive paint, pigmented with highly conductive silvercoated copper flake. The cured paint is smooth and extremely hard. It is abrasion, scratch, and mar resistant. It adheres very strongly to plastics, including chemically resistant and low energy plastics, as well as metal, glass, ceramic and wood. 843ER is generally used to provide extremely durable EMI/RFI shielding for applications in harsh environments.

Black Epoxy, Encapsulating & Potting Compound 832B is a general purpose, rigid, 2-part black epoxy that provides extreme environmental, mechanical and physical protection for printed circuit boards and electronic assemblies. Due to its low mixed viscosity, 832B can easily penetrate small gaps and cavities. It also provides excellent electrical insulation and protects components from static discharge, vibration, abrasion, thermal shock, environmental humidity, salt water, fungus, and many harsh chemicals.

4223F-312G – Urethane Coating Spray 4223F-312G is a 1-part, heat curing, UL 746E certified, thermoset urethane (UR) conformal coating spray. It cures to a durable, flexible, scratch resistant and smooth finish. It is easy to apply and can be handled in 15 minutes. It cures in only 2 hours at 100 °C (212 °F). It may be removed with the right conformal coating remover (MG’s 8309 or 8310A) or soldered through for repair or rework. 4223F-312G is considered to be one of the best conformal coatings for protecting circuit boards in chemically challenging environments. It provides strong protection against aggressive chemicals, corrosion, moisture, fungus, dirt, dust, thermal shock, abrasion, short circuit, high-voltage arcing, and static discharge. This product is also available in liquid format. For acrylic conformal coating sprays, see 419D-340G or 419E-340G, and for silicone conformal coating sprays see 422B-340G or 422C-340G.

Super Shield™ Silver Conductive Paint 842AR is a conductive paint that consists of a 1-part, solvent-based acrylic lacquer, pigmented with an extremely conductive silver flake. It is smooth, hard, and abrasion resistant. It can be easily applied by brush or spray. It has a quick dry time, with no heat cure necessary. It adheres strongly to most injection-molded plastics, such as ABS, PBT and PVA. It provides superior high frequency shielding. It also provides strong corrosion resistance, and is suitable for use in marine environments. 842AR is designed to provide a conductive coating for the interior of plastic electronic enclosures that suppresses EMI/RFI emissions. It excels when the highest level of shielding is required. Also, its thin minimum layer height makes it suitable for board level applications.

Super Shield™ Silver Epoxy Conductive Paint 842ER is a 2-part silver epoxy conductive paint. It is a smooth, flexible coating that provides excellent electrical conductivity at a low film thickness. It maintains flexibility at low temperatures, provides exceptional adhesion to a wide variety of substrates, and provides excellent environmental stability. 842ER is designed for large volume board-level or package-level EMI shielding applications. It can replace traditional metal lid, which reduces cost, board thickness, and mass.

125-46A/B is an easy to use, 1 to 1 mix ratio, two part, heat cured, flexible, silver–filled epoxy adhesive used for making electrical and mechanical attachments on electrical components and devices. Unlike typical heat curing systems, this product always results in excellent conductivity and is less sensitive to handling and ambient conditions. The 125-46A/B is capable of being applied via syringe dispensing and is also capable of being dispensed via direct write and jetting systems, such as EFD's PicoDotTM jet dispenser. 125-46A/B is an economical version of 124-08A/B.Features Economical conductive epoxy adhesive

ECP 526 Anti Static Conductive Two Pack Epoxy Paint is a high quality waterborne two-pack epoxy system. Environmentally friendly, it offers the advantages of low odor and easy cleaning of equipment with water.

ECP 526 'Extra' Conductive Water-based anti-slip epoxy. ECP 526 'Extra' is high-quality water borne two pack epoxy system. Environmentally friendly, it offers the advantages of low odor, and easy cleaning of equipment with water and anti-slip properties. Additionally, the coating has an advantage over conventional anti-slip coatings as it can be applied by virtually any method, including spraying. It is very esthetically appealing as it is made without the traditional additives used in anti-slip coatings such as grit and metal shards and provides a silky matte finish.

EBECRYL® 109 is a dynamic acrylate-methacrylate monomer blend, combines 50% trimethylolpropane triacrylate (TMPTA) and 50% hydroxyethylmethacrylate (HEMA). Under free radical influence, this formulation swiftly polymerizes, making it ideal for coatings that demand superior thermal and chemical resistance. Highly recommended for applications requiring robust protection, EBECRYL® 109 excels in coatings necessitating enhanced chemical and thermal durability. It proves beneficial in solder and etch resists, ensuring optimal performance in challenging environments.

125-50 is an opaque white, screen printable, one component, epoxy, solder mask. This product features excellent adhesion to Kapton, Mylar, aluminum, FR-4 boards, glass and a variety of other substrates. Unlike conventional dielectric materials, this product is very resistant to abrasion, scratching, and thermal aging. Applications for 125-50 include, but are not limited to, solder resistant coatings for electrical and electronic devices.Features Opaque White epoxy dielectric, adheres to ITO.

ECP 575/JSF182/182 Permanently Conductive Clear Two Pack Water-based Epoxy Graphene Paint for use in the electronics industry where ESD (electrostatic discharge) is to be avoided, ECP 575/JSF182/182 is a high quality waterborne two-pack epoxy system. Environmentally friendly it offers the advantage of low odor and easy cleaning of equipment with water. ECP 575/JSF182/182 finds applications in such areas as floor coatings, particularly where the previous coating is unknown as solvent will attack many coatings causing them to lift.

HYBRID POWDER SYSTEM is a mixture of epoxy and polyester resins, this coating combines chemical resistance, toughness, flexibility, and greater weathering capabilities. The resin combination also leads to good flow and electrostatic spray characteristics. Recommended for interior purposes.

Resin Technology Group CT-523LV Cationic UV Cure Epoxy Adhesive is an epoxy-based, low viscosity, cationic-curable adhesive and/or sealant. This product is activated by exposure to medium intensity UV radiationresulting in a high strength, chemical resistant, low outgassing polymer system capable of surviving exposure up to 200°C.

Abocoat 8501-1™ is a Coating with Exceptionally High Resistance To Acids, Alkalis, Solvents, Acetone, Alcohol, & Gasohol. High Solids 2-Component, Fast-Setting Epoxy System.

BRITOL X-575 (75% Solid) is Liquid Epoxy Resin. Used as Chemical Resistant Air Dry & Bake Coatings, Electro Technical Users, Reinforced Plastics, Electrical Laminates.

Cast-Coat Inc. CC3-208 Clear is a general purpose transparent epoxy coating which can be easily applied by brush, dip or spray. It offers high resistance to water and chemical attack. For continuous high heat or corrosive chemical exposure, Ancamine Z curing agent is recommended, but for most applications requiring room temperature cure, H-1 Hardener is ideal. Build up of 2 – 5 mils is typical for single applications. Multiple applications can be achieved without loss of adhesion between coats. CC3-208 contains solvents which evaporate during cure.

APCO APCO 255-1044 Epoxy Ester Primer is a fast drying single part epoxy ester primer. Provides tight barrier protection to properly prepared steel surfaces. Provides increased chemical resistance compared to conventional alkyds. 255 is specifically formulated for use on electrical transformers, but may also be used anywhere increased chemical resistance is desired.

BONDiT™ B-755 is a unique low viscosity, two-part, high strength, 100% solids, room-temperature curing semi-rigid cyclo-aliphatic epoxy resin system with good scratch and impact resistance. Suitable for clear coat, conformal coating and electrical potting applications. The B-755 handles harsh environments easily and is effective against moisture, salt water, acids, alkalies, oils, fuels, solvents and detergents. B-755 produces very low extract products in soak tests and provides corrosion resistance.